NVIDIA cuda7在centos6.5中的安裝
[[email protected] ~]# systemctl disable firewalld.service
rm '/etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service'
rm '/etc/systemd/system/basic.target.wants/firewalld.service'
[[email protected] ~]# vi /etc/selinux/config
[[email protected]
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
重新啟動繼續配置
=============================================================================================
[
[[email protected] yum.repos.d]# mkdir -p ./bak
[[email protected] yum.repos.d]# mv *.repo ./bak/
[[email protected] yum.repos.d]# vi local.repo
[[email protected] yum.repos.d]# cat local.repo
[local_server]
name=This is a local repo
baseurl=file:///mnt/iso
enabled=1
gpgcheck=0
[
[[email protected] yum.repos.d]# mkdir -p /mnt/iso
[[email protected] yum.repos.d]# mount -o loop /cudainstall/CentOS\ 7\ x86_64.iso /mnt/iso/
[[email protected] yum.repos.d]# vi /etc/rc.local
[[email protected] yum.repos.d]# chmod +x /etc/rc.d/rc.local
[[email protected] yum.repos.d]# cat /etc/rc.lcoa
cat: /etc/rc.lcoa: Aucun fichier ou dossier de ce type
[[email protected] yum.repos.d]# cat /etc/rc.local
#!/bin/bash
# THIS FILE IS ADDED FOR COMPATIBILITY PURPOSES
#
# It is highly advisable to create own systemd services or udev rules
# to run scripts during boot instead of using this file.
#
# In contrast to previous versions due to parallel execution during boot
# this script will NOT be run after all other services.
#
# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure
# that this script will be executed during boot.
mount -o loop /cudainstall/CentOS\ 7\ x86_64.iso /mnt/iso/
touch /var/lock/subsys/local
[[email protected] yum.repos.d]# hostnamectl set-hostname cuda02
[[email protected] ~]# yum install kernel-devel gcc gcc-c++ yum install libX*
檢查nouveau
[[email protected] ~]# lsmod |grep nouveau
如果有輸出 使用modprobe -r nouveau
[[email protected] ~]#init 3
==================================================================================================
安裝cuda時一定不要安裝OpenGL；切記，否則有可能安裝完之後，圖形化桌面啟動不了，過程中會出現如下錯誤資訊
[[email protected] cudainstall]# chmod +x cuda_7.0.28_linux.run
[[email protected] cudainstall]# ./cuda_7.0.28_linux.run
Do you accept the previously read EULA? (accept/decline/quit): accept
Install NVIDIA Accelerated Graphics Driver for Linux-x86_64 346.46? ((y)es/(n)o/(q)uit): y
Do you want to install the OpenGL libraries? ((y)es/(n)o/(q)uit) [ default is yes ]: n
Install the CUDA 7.0 Toolkit? ((y)es/(n)o/(q)uit): y
Enter Toolkit Location [ default is /usr/local/cuda-7.0 ]:
Do you want to install a symbolic link at /usr/local/cuda? ((y)es/(n)o/(q)uit): y
Install the CUDA 7.0 Samples? ((y)es/(n)o/(q)uit): y
Enter CUDA Samples Location [ default is /root ]:
Installing the NVIDIA display driver...
Installing the CUDA Toolkit in /usr/local/cuda-7.0 ...
Missing recommended library: libGLU.so
Installing the CUDA Samples in /root ...
Copying samples to /root/NVIDIA_CUDA-7.0_Samples now...
Finished copying samples.
===========
= Summary =
===========
Driver: Installed
Toolkit: Installed in /usr/local/cuda-7.0
Samples: Installed in /root, but missing recommended libraries
Please make sure that
- PATH includes /usr/local/cuda-7.0/bin
- LD_LIBRARY_PATH includes /usr/local/cuda-7.0/lib64, or, add /usr/local/cuda-7.0/lib64 to /etc/ld.so.conf and run ldconfig as root
To uninstall the CUDA Toolkit, run the uninstall script in /usr/local/cuda-7.0/bin
To uninstall the NVIDIA Driver, run nvidia-uninstall
Please see CUDA_Getting_Started_Guide_For_Linux.pdf in /usr/local/cuda-7.0/doc/pdf for detailed information on setting up CUDA.
Logfile is /tmp/cuda_install_2994.log
安裝cuda驅動
[[email protected] cudainstall]# chmod +x cuda_7.0.28_linux.run
[[email protected] cudainstall]# ./cuda_7.0.28_linux.run
Do you accept the previously read EULA? (accept/decline/quit): accept
Install NVIDIA Accelerated Graphics Driver for Linux-x86_64 346.46? ((y)es/(n)o/(q)uit): y
Do you want to install the OpenGL libraries? ((y)es/(n)o/(q)uit) [ default is yes ]: n
Install the CUDA 7.0 Toolkit? ((y)es/(n)o/(q)uit): y
Enter Toolkit Location [ default is /usr/local/cuda-7.0 ]:
Do you want to install a symbolic link at /usr/local/cuda? ((y)es/(n)o/(q)uit): y
Install the CUDA 7.0 Samples? ((y)es/(n)o/(q)uit): y
Enter CUDA Samples Location [ default is /root ]:
Installing the NVIDIA display driver...
Installing the CUDA Toolkit in /usr/local/cuda-7.0 ...
Missing recommended library: libGLU.so
Installing the CUDA Samples in /root ...
Copying samples to /root/NVIDIA_CUDA-7.0_Samples now...
Finished copying samples.
===========
= Summary =
===========
Driver: Installed
Toolkit: Installed in /usr/local/cuda-7.0
Samples: Installed in /root, but missing recommended libraries
Please make sure that
- PATH includes /usr/local/cuda-7.0/bin
- LD_LIBRARY_PATH includes /usr/local/cuda-7.0/lib64, or, add /usr/local/cuda-7.0/lib64 to /etc/ld.so.conf and run ldconfig as root
To uninstall the CUDA Toolkit, run the uninstall script in /usr/local/cuda-7.0/bin
To uninstall the NVIDIA Driver, run nvidia-uninstall
Please see CUDA_Getting_Started_Guide_For_Linux.pdf in /usr/local/cuda-7.0/doc/pdf for detailed information on setting up CUDA.
Logfile is /tmp/cuda_install_2994.log
廣播cuda的路徑
[[email protected] cudainstall]# vi /etc/profile.d/cuda.sh
[[email protected] cudainstall]# cat /etc/profile.d/cuda.sh
export PATH=/usr/local/cuda-7.0/bin:$PATH
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/cuda-7.0/lib64
[[email protected] cudainstall]# chmod 755 /etc/profile.d/cuda.sh
[[email protected] cudainstall]# source /etc/profile.d/cuda.sh
[[email protected] cudainstall]#
=================================================================================================================
恢復圖形介面顯示
[[email protected] cudainstall]# init 5
=================================================================================================================
安裝vnc
[[email protected] cudainstall]# yum -y install tigervnc-server
相關推薦
在Vmware ESXI6.5中安裝pfsense2.34實例
vmware esxi6.5 pfsense現在虛擬機功能越來越強大，在ESXI中配置軟路由或防火墻成為越來越多用戶的選擇，可以利用ESXI主機強大的功能，靈活的配置滿足安裝pfsense的不同的需求。ESXI主機設置一、主機配置要求本教程涉及網絡及硬件的基本要求如下：一臺已安裝好ESXI6.5的虛擬主機：
CentOS 6.5中安裝使用dstat資源統計工具
scripts command inodes ftw entos 閱讀 問題 eth0 fin 目錄 1 dstat 工具的使用 1.1 什麽是 dstat 1.2 dstat 的基本使用 1.2.1 dstat 的默認選項 1.2.2 dstat的常用選項 1.3 檢
HGDB4.3.2在RHEL7.5中安裝和解除安裝指導手冊
目錄 文件用途 詳細資訊 相關文件 文件用途 介紹HGDB4.3.2在RHEL7.5系統上的圖形化安裝和解除安裝流程。 詳細資訊 1.安裝版本及注意事項 1.1 安裝版本 作業系統 Redhat 7.5 x86_64
在Centos6.5中安裝elasticsearch5.5.2出現的錯誤
啟動異常：ERROR: bootstrap checks failed system call filters failed to install; check the logs and fix your configuration or disable system call filters
CentOS7.5中安裝redis5.0（實踐踩坑版）
CentOS7.5中安裝redis5.0（實踐踩坑版） 2018年10月22日 17:01:43 ZerahMu 閱讀數：805 標籤： centOSlinuxredisgrepvim 更多 個人分類： 專案環境 CentOS下Redis的安
Centos 6.5中安裝docker的步驟(簡潔版)
Docker 是一個開源的應用容器引擎，讓開發者可以打包他們的應用以及依賴包到一個可移植的容器中，然後釋出到任何流行的 Linux 機器上，也可以實現虛擬化。容器是完全使用沙箱機制，相互之間不會有任何介面（類似 iPhone 的 app）。幾乎沒有效能開銷,可以很容易地在機器和資料中
在deepin 15.5中安裝vs code並配置c/c++環境
參考了以下幾篇文章：https://www.zhihu.com/question/30315894/answer/154979413（雖然講解的是Windows環境中的安裝，但十分詳盡，很有參考價值）；https://my.oschina.net/u/1044667/blog
在CentOS6.5中安裝MongoDB
最近因CasServer需要將Service Registry和Ticket Registry儲存在MongoDB，於是就需要在測試環境中安裝MongoDB,本次安裝的是官網最新版的MongoDB。1. 下載MongoDB的二進位制包https://fastdl.mongodb.org/linux/mongo
CentOS7.5中安裝redis5.0
CentOS下Redis的安裝 前言 安裝Redis需要知道自己需要哪個版本，有針對性的安裝，比如如果需要redis GEO這個地理集合的特性，那麼redis版本就不能低於3.2版本，由於這個特性是3.2版本才有的。另外需要注意的是，Redis約定次版本號（即第一個小數點後的數字）為偶數的版本是
Linux CentOS 6.5中安裝與配置Tomcat-8方法
2. 下載jdk-8u20-linux-x64.rpm，執行rpm -ivh jdk-8u20-linux-x64.rpm安裝；第二步 安裝 tomcat 將apache-tomcat-8.0.0.RC3.tar.gz檔案上傳到/usr/local中執行以下操作： 複製程式碼程式碼如下: [[email&
CentOS7.5中安裝kubernetes - v1.12.1
文章目錄 1 機器環境 1.1 機器1 1.2 機器2 1.3 機器3 2 軟體介紹 2.1 作業系統 2.2 Docker 2.3 etcd 2.4 flanneld
在deepin 15.5中安裝vs code並配置c/c++環境（二）——配置clang
接上文：https://blog.csdn.net/defetc/article/details/79946100本文配置檔案參考：https://www.zhihu.com/question/30315894/answer/154979413一、安裝clang apt
Centos7.5中安裝JDK1.8環境變數配置
Centos7.5中安裝JDK1.8環境變數配置 在JDK的壓縮包上傳到檔案中後進行解壓。我的是解壓到usr/localjava資料夾中。 解壓之後，就需要進行環境變數的配置 vim /etc/profile （編輯p
CentOS6.5中安裝JDK環境
將jdk-8u181-linux-x64.rpm使用xftp拷貝到/home/software資料夾下，執行安裝命令 rpm -ivh jdk-8u181-linux-x64.rpm -i安裝-v顯
linux CentOS 6.5 中安裝與配置JDK-7
系統環境：centos-6.5 安裝方式：rpm安裝 軟體：jdk-7u79-linux-x64.rpm 檢驗系統原版本 [[email protected] ~]# java -version java version "1.7.0_24" OpenJDK Ru
CentOS 6.5 中安裝Jenkins
官方文件：http://pkg.jenkins-ci.org/redhat/ 1.先安裝JAVA 2.安裝jenkins sudo wget -O /etc/yum.repos.d/jenkins.repo http://pkg.jenkins-ci.org/redha
CentOS6.5中安裝JDK
1.先解除安裝CentOS6.5自的open-jdk 2.上傳linux版本的jdk： 3.新建一個jdk安裝目錄： #mkdir /usr/local/src/java 4.在上傳的jd
CentOS7.5中安裝kubernetes
1 機器環境 1.1 機器1 hostname：k8s-master1 ip：172.16.159.130 1.2 機器2 hostname：k8s-node1 ip：172.16.159.131 1.3 機器3 hostname：k8s-node2 ip：1
CentOS6.5中安裝tomcat
1.先安裝好JDK 2.上傳apache-tomcat-7.0.73.tar.gz 3.建立tomcat目錄 #mkdir /usr/local/src/tomcat 4.將上傳的tomcat
CentOS7.5中安裝MySql（實踐踩坑版）
前言 接上篇，SpringBoot從入門到熟悉（二）web開發，在學習springBoot過程中用到了MySql，所以這篇就記錄一下我安裝MySql的詳細過程。因為我是在配置過程中記錄在有道雲筆記的，所以這篇主要就是複製貼上我的雲筆記了。所以，你還會看到一個前言，GGG