ubuntu 下 升級 nginx
我的是一開始用 apt-get install nginx 安裝的,所以下面是 在已經安裝的情況下升級
下載 stable版本的nginx :
http://nginx.org/en/download.html 這裡 我下載的 1.6.2 stable 版本
進入到要儲存檔案的目錄 我的是 cd /home
wget http://nginx.org/download/nginx-1.6.2.tar.gz
然後 解壓 檔案
tar -zxvf nginx-1.6.2.tar.gz
使用 nginx -V 檢視自己的引數(V是大寫):
比如我的是:
進去到你下載並解壓好的資料夾下,比如我解壓的檔案在 /home/nginx-1.6.2 :
cd /home/nginx-1.6.2
執行 ./configure 後面跟上你的 --prefix 比如 我的:
--prefix=/usr/share/nginx --conf-path=/etc/nginx/nginx.conf --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log --lock-path=/var/lock/nginx.lock --pid-path=/run/nginx.pid --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --with-debug --with-pcre-jit --with-ipv6 --with-http_ssl_module --with-http_stub_status_module --with-http_realip_module --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_spdy_module --with-http_sub_module --with-http_xslt_module --with-mail --with-mail_ssl_module
回車:
可能會出現問題 因為你一開始的 nginx不是編譯的 ,可能出現以下一些問題(我出現的問題,如果和我的不一樣 去google):
安裝libxslt
./configure: error: the HTTP XSLT module requires the libxml2/libxslt libraries.
apt-get install libxslt1-dev(注意這裡的 可能和你的不一樣 當你打 libxslt 時 按tab 看會出現什麼 東西 因為軟體可能和你的不一樣)缺少GD library
./configure: error: the HTTP image filter module requires the GD library.
apt-get install libgd2-xpm libgd2-xpm-dev 和上面的 一樣 按 tab 看給你什麼東西
以下的 可能你會遇到:
rewrite需要pcre支援
./configure: error: the HTTP rewrite module requires the PCRE library.
apt-get install libpcre3 libpcre3-dev 和上面的 一樣 按 tab 看給你什麼東西
http cache需要openssl
./configure: error: the HTTP cache module requires md5 functions from OpenSSL library.
apt-get install libssl-dev openssl 和上面的 一樣 按 tab 看給你什麼東西
安裝GeoIP library
./configure: error: the GeoIP module requires the GeoIP library.
apt-get install libgeoip-dev 和上面的 一樣 按 tab 看給你什麼東西
在 執行 ./configure --prefix ...... //這裡是你的 引數不要複製過去
好了後會看到 這個 :
然後執行 make,等待結束
用 which nginx 檢視你的 nginx 啟動程式在哪 我的在 /usr/sbin/nginx
備份舊版本的nginx可執行檔案
mv /usr/sbin/nginx /usr/sbin/nginx.old
複製新版本的nginx這行檔案
因為 前面你到了nginx-1.6.2資料夾下 用 ls 檢視 會發現有個 objs 目錄
cp objs/nginx /usr/sbin/
檢視 是否正確 :
nginx -t
如果出現這個 說明真確
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
執行 make upgrade (說明 可能你在別的地方看到 make install 如果是 升級 應該是 upgrade)
如果尼出現了錯誤那麼修改一下Makefile(ls 就能看到這個檔案)裡面的upgrade標籤下的路徑,修改為正確的Nginx可執行檔案的路徑,Ubuntu下一般是/usr/sbin/nginx (就是用which nginx 看到的 路徑 )這時 你會 看到 有clean install 和 upgrade 等 我們 make upgrade 就是執行這個 upgrade 如果你在 其他 地方看到 最後執行
kill -USR2 `cat /usr/local/nginx/logs/nginx.pid` 等 其他的 命令 這裡 你執行 make upgrade 就行 了因為裡面已經包含了你要的命令 這也是最後一步
至此 已經升級完成 nginx -v (小v)檢視版本已經是 1.6.2 版本 如果 不放心 可以 service nginx restart 重啟 一邊