1. 程式人生 > 實用技巧 >Error initializing emulator: The XDS200 update cannot work if more than one XDS2xx probe is attached

Error initializing emulator: The XDS200 update cannot work if more than one XDS2xx probe is attached

更換成2020年的新版本CCS,再次去除錯DSP程式的時候報錯:Error initializing emulator: The XDS200 update cannot work if more than one XDS2xx probe is attached.
此時在這裡插入圖片描述
選擇update
繼續,得到另外的提示:Error initializing emulator:
The XDS200 update cannot work if more than one XDS2xx probe is attached. Click “Cancel” then unplug the other XDS2xx probes and restart the debug session to update the firmware.

Click “Retry” to retry without doing the update.
(Emulation package 9.2.0.00002)
error
不用理會選擇Retry。彈出框訊息,開始寫入程式,萬事OK。

至於為什麼?我也沒有深究了,按照常理推斷,肯定是升級引起的相容問題了。