LVS-DR模型配置
LVS-DR模型配置
OS | IP | 子網掩碼 | 路由閘道器 |
Centos6.5 (Directory) | Eth0:192.168.25.209(DIP) | 255.255.252.0 | |
Eth0:0:192.168.26.210(VIP) | 255.255.255.255 | Eth0:0 | |
OS | RS | 子網掩碼 | 路由閘道器 |
Centos6.6 (RS1) | Eth0:192.168.25.210(RIP) | 255.255.252.0 | 192.168.25.3 |
Lo:0:192.168.26.210(VIP) | 255.255.255.255 | Lo:0 | |
Centos6.6 (RS2) | Eth0:192.168.25.211(RIP) | 255.255.252.0 | 192.168.25.3 |
Lo:0:192.168.26.210(VIP) | 255.255.255.255 | Lo:0 | |
Centos6.6 (RS3) | Eth0:192.168.25.212(RIP) | 255.255.252.0 | 192.168.25.3 |
Lo:0:192.168.26.210(VIP) | 255.255.255.255 | Lo:0 | |
Win7 | IP:192.168.25.159(CIP) | 255.255.252.0 | 192.168.25.3 |
配置Directory:
ifconfig eth0 192.168.25.209/22 up
ifconfig eth0:0 192.168.26.210 netmask 255.255.255.255 broadcast 192.168.26.210 up
route add -host 192.168.26.210 dev eth0:0
route -n
RS1:
ifconfig eth0 192.168.25.210/22 up
route add default gw 192.168.25.3 #指定自己閘道器
#配置系統核心引數：
echo1>/proc/sys/net/ipv4/conf/all/arp_ignore
echo1>/proc/sys/net/ipv4/conf/eth0/arp_ignore
echo2>/proc/sys/net/ipv4/conf/all/arp_announce
echo2>/proc/sys/net/ipv4/conf/eth0/arp_announce
ifconfig lo:0 192.168.26.210 netmask 255.255.255.255 broadcast 192.168.26.210 up
route add -host 192.168.26.210 dev lo:0
curl 192.168.26.210
curl 192.168.25.210
RS2配置：
ifconfig eth0 192.168.25.211/22 up
route add default gw 192.168.25.3
echo1>/proc/sys/net/ipv4/conf/all/arp_ignore
echo1>/proc/sys/net/ipv4/conf/eth0/arp_ignore
echo2>/proc/sys/net/ipv4/conf/all/arp_announce
echo2>/proc/sys/net/ipv4/conf/eth0/arp_announce
ifconfig lo:0 192.168.26.210 netmask 255.255.255.255 broadcast 192.168.26.210 up
route add -host 192.168.26.210 dev lo:0
curl 192.168.26.210
curl 192.168.25.211
RS3配置：
ifconfig eth0 192.168.25.212/22 up
route add default gw 192.168.25.3
echo1>/proc/sys/net/ipv4/conf/all/arp_ignore
echo1>/proc/sys/net/ipv4/conf/eth0/arp_ignore
echo2>/proc/sys/net/ipv4/conf/all/arp_announce
echo2>/proc/sys/net/ipv4/conf/eth0/arp_announce
ifconfig lo:0 192.168.26.210 netmask 255.255.255.255 broadcast 192.168.26.210 up
route add -host 192.168.26.210 dev lo:0
curl 192.168.26.210
curl 192.168.25.212
回到Directory進行LVS配置：
ipvsadm -A -t 192.168.26.210:80 -s rr
ipvsadm -a -t 192.168.26.210:80 -s 192.168.25.210 -g
ipvsadm -a -t 192.168.26.210:80 -s 192.168.25.211 -g
ipvsadm -a -t 192.168.26.210:80 -s 192.168.25.212 -g
ipvsadm -L -n #檢視LVS配置資訊
測試VIP是否可用。
訪問測試：通過多次重新整理觀察變化情況。
檢視訪問後LVS狀態：
轉載於:https://blog.51cto.com/jdonghong/1883343