HomePod mini是蘋果首款支援Thread網路技術的產品
阿新 • • 發佈:2020-10-14
一、實驗目的
• 對 Python 呼叫 OpenDaylight 的 REST API 方法有初步瞭解。二、實驗任務
•本實驗需要用另一種方法完成上一個實驗相同的功能,即通過 Python 程式呼叫OpenDaylight 的北向介面下發關於硬超時的流表,實現拓撲內主機在一定時間內的網路通斷。實驗拓撲如下:三、實驗步驟
1. 實驗環境
•安裝了 Ubuntu 16.04.5 Desktop amd64 的虛擬機器2. 實驗過程
(1)生成拓撲 $ sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switchovsk,protocols=OpenFlow13#!/usr/bin/python import requests from requests.auth import HTTPBasicAuth def http_put(url,jstr): url= url headers = {'Content-Type':'application/json'} resp = requests.put(url,jstr,headers=headers,auth=HTTPBasicAuth('admin', 'admin')) return resp if __name__ == "__main__": url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1' with open('hardtimeout.json') as f: jstr = f.read() resp = http_put(url,jstr) print resp.content
{ "flow": [ { "id": "1", "match": { "in-port": "1", "ethernet-match": { "ethernet-type": { "type": "0x0800" } }, "ipv4-destination": "10.0.0.3/32" }, "instructions": { "instruction": [ { "order": "0", "apply-actions": { "action": [ { "order": "0", "drop-action": {} } ] } } ] }, "flow-name": "flow1", "priority": "65535", "hard-timeout": "10", "cookie": "2", "table_id": "0" } ] }(3)執行 Python 程式碼,完成流表下發 $ python odlnorth.py 結果驗證方法同實驗 6。 提示:執行程式碼如果報錯:ImportError: No module named requests,可嘗試如下方法。 $ sudo apt-get install python-pip //如果 pip 沒裝的話需要執行 $ sudo pip install requests 驗證結果如下 h1 ping h3 有 10 秒時間是中斷的,結果符合預期 * 更多 OpenDaylight 的 REST API 文件可以在下面的地址中查詢: http://127.0.0.1:8181/apidoc/explorer/index.html
四、實驗心得
本實驗要實現的功能與實驗六一樣,只是用Python 程式呼叫OpenDaylight 的北向介面下發關於硬超時的流表。寫好相關程式碼後,其餘操作與之前一樣,所以做下來很順利。我覺得相比起Postman下發流表,還是Python程式呼叫來的方便,因為上次出現了些問題做得久了些,而這次很快就做好了,還是因為Postman使用不夠熟吧,所以一些細節沒能把握好。