實驗 7:OpenDaylight 實驗——Python 中的 REST API 呼叫
實驗目的
對 Python 呼叫 OpenDaylight 的 REST API 方法有初步瞭解。
實驗任務
本實驗需要用另一種方法完成上一個實驗相同的功能,即通過 Python 程式呼叫OpenDaylight 的北向介面下發關於硬超時的流表,實現拓撲內主機在一定時內的網路通斷。實驗拓撲如下:
實驗步驟
1. 實驗環境
安裝了 Ubuntu 18.04.5 Desktop amd64 的虛擬機器
2. 實驗過程
(1)生成拓撲
sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13
生成拓撲的方法同之前的實驗一致。
(2)編寫 Python 程式碼和 JSON 格式的請求內容
vim odlnorth.py
#!/usr/bin/python import requests from requests.auth import HTTPBasicAuth def http_put(url,jstr): url= url headers = {'Content-Type':'application/json'} resp = requests.put(url,jstr,headers=headers,auth=HTTPBasicAuth('admin', 'admin')) return resp if __name__ == "__main__": url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow- node-inventory:table/0/flow/1' with open('hardtimeout.json') as f: jstr = f.read() resp = http_put(url,jstr) print(resp.content)
由於是下發流表,因此需要有 http 請求的具體內容,同之前的 Postman一樣,也是以 JSON 格式來表示。
vim hardtimeout.json
檔案中不包含 http 請求的 url 地址:
{ "flow": [ { "id": "1", "match": { "in-port": "1", "ethernet-match": { "ethernet-type": { "type": "0x0800" } }, "ipv4-destination": "10.0.0.3/32" }, "instructions": { "instruction": [ { "order": "0", "apply-actions": { "action": [ { "order": "0", "drop-action": {} } ] } } ] }, "flow-name": "flow1", "priority": "65535", "hard-timeout": "10", "cookie": "2", "table_id": "0" } ] }
(3)執行 Python 程式碼,完成流表下發
python odlnorth.py
結果驗證方法同實驗 6。
提示:執行程式碼如果報錯:ImportError: No module named requests,可嘗試
如下方法。
sudo apt-get install pythonpip
// 如果 pip 沒裝的話需要執行
sudo pip install requests
- 更多 OpenDaylight 的 REST API 文件可以在下面的地址中查詢:
http://127.0.0.1:8181/apidoc/explorer/index.html
選做題
vim odlnorth.py
編輯程式碼
#!/usr/bin/python
import requests
from requests.auth import HTTPBasicAuth
import json
def http_put(url,jstr):
url= url
headers = {'Content-Type':'application/json'}
resp = requests.get(url,jstr,headers=headers,auth=HTTPBasicAuth('admin', 'admin'))
return resp
def get_flow_table_conut(res):
return len(res["flow-node-inventory:flow"])
if __name__ == "__main__":
url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1'
with open('hardtimeout.json') as f:
jstr = f.read()
resp = http_put(url,jstr)
print(resp.content)
print(get_flow_table_conut(json.loads(resp.content)))
就是把上面那個程式碼的 put 改成 get,獲得流表項,然後解析返回的資料,獲取流表數目
執行截圖
實驗要求
-
1.根據實驗步驟復現上述實驗,指導書僅提供參考方法,如果你對 Python 比較
熟悉,且有其他方法,歡迎使用。 -
2.利用Python程式獲取本實驗拓撲中的交換機s1中活動的流表數目active-flows。
-
3.在部落格園發表一篇部落格,記錄主要步驟,如果完成了選做題,請在部落格標題上標註,並提交程式到 GitHub,展示執行結果
總結
本次實驗較為簡單,根據老師所提供的實驗講義即可完成。