【MQTT學習】ESP8266 AT指令連線阿里雲
阿新 • • 發佈:2020-10-20
一、實驗目的
對 Python 呼叫 OpenDaylight 的 REST API 方法有初步瞭解。
二、實驗任務
本實驗需要用另一種方法完成上一個實驗相同的功能,即通過 Python 程式呼叫OpenDaylight 的北向介面下發關於硬超時的流表,實現拓撲內主機在一定時間內的網路通斷。實驗拓撲如下:
三、實驗步驟
(1)啟動 OpenDaylight,生成拓撲並連線 OpenDaylight
$ sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13
實驗環境
安裝了 Ubuntu 18.04.5 Desktop amd64 的虛擬機器 實驗過程(1)啟動 OpenDaylight,生成拓撲並連線 OpenDaylight
$ sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13
- (2)編寫 Python 程式碼和 JSON 格式的請求內容
$ nano odlnorth.py
import requests
from requests.auth import HTTPBasicAuth
def http_put(url,jstr):
url= url
headers = {'Content-Type':'application/json'}
resp=requests.put(url,jstr,headers=headers,auth=HTTPBasicAuth('admin', 'admin'))
return resp
if __name__ == "__main__":
url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flownode-inventory:table/0/flow/1'
with open('hardtimeout.json') as f:
jstr = f.read()
resp = http_put(url,jstr)
print resp.content
由於是下發流表,因此需要有 http 請求的具體內容,同之前的 Postman 一樣,也是以 JSON 格式來表示。
編輯 hardtimeout.json 檔案:
$ nano hardtimeout.json
檔案中不包含 http 請求的 url 地址
{
"flow": [
{
"id": "1",
"match": {
"in-port": "1",
"ethernet-match": {
"ethernet-type": {
"type": "0x0800"
}
},
"ipv4-destination": "10.0.0.3/32"
},
"instructions": {
"instruction": [
{
"order": "0",
"apply-actions": {
"action": [
{
"order": "0",
"drop-action": {}
}
]
}
}
]
},
"flow-name": "flow1",
"priority": "65535",
"hard-timeout": "10",
"cookie": "2",
"table_id": "0"
}
]
}
(3)執行 Python 程式碼,完成流表下發
$ python odlnorth.py
可以看到h1 ping h3 有 10 秒時間是中斷的,結果符合預期。