安裝模擬帶庫

 1 [root@classroom TAPE]# cd mhvtl-master/
 2 [root@classroom mhvtl-master]# ls
 3 ccan       doc      INSTALL   man               scripts  usr
 4 ChangeLog  etc      kernel    mhvtl-utils.spec  tcopy    vagrant
 5 COPYING    include  Makefile  README            todo     webgui
 6 [root@classroom mhvtl-master]# cd kernel/
 7
 
 [root@classroom kernel]# make
 8 [root@classroom kernel]# make install
 9 [root@classroom kernel]# cd ..
10 [root@classroom mhvtl-master]# make
11 [root@classroom mhvtl-master]# make install

重啟磁帶庫

1 [root@classroom mhvtl-master]# systemctl restart mhvtl.target

列出scsi裝置

 1 [root@classroom mhvtl]# lsscsi -g
 
 2 [0:0:0:0]    cd/dvd  PLDS     DVD-RW DS8ABSH   AL61  /dev/sr0   /dev/sg0
 3 [4:0:0:0]    disk    ATA      ST500LT012-1DG14 LVM1  /dev/sda   /dev/sg1
 4 [6:0:0:0]    mediumx STK      L700             0106  /dev/sch0  /dev/sg11
 5 [6:0:1:0]    tape    IBM      ULT3580-TD5      0106  /dev/st6   /dev/sg9
 6 [6:0:2:0]    tape    IBM      ULT3580-TD5      0106
 
  /dev/st2   /dev/sg5
 7 [6:0:3:0]    tape    IBM      ULT3580-TD4      0106  /dev/st1   /dev/sg4
 8 [6:0:4:0]    tape    IBM      ULT3580-TD4      0106  /dev/st5   /dev/sg8
 9 [6:0:8:0]    mediumx STK      L80              0106  /dev/sch1  /dev/sg12
10 [6:0:9:0]    tape    STK      T10000B          0106  /dev/st7   /dev/sg10
11 [6:0:10:0]   tape    STK      T10000B          0106  /dev/st3   /dev/sg6
12 [6:0:11:0]   tape    STK      T10000B          0106  /dev/st4   /dev/sg7
13 [6:0:12:0]   tape    STK      T10000B          0106  /dev/st0   /dev/sg3
14 [7:0:0:0]    disk    Kingston DataTraveler 3.0 PMAP  /dev/sdc   /dev/sg2

linux命令操作磁帶庫

 1 [root@classroom ~]# mtx -f /dev/sg12 load 1 3　　　　　　　　　　--把第1盒帶子（卷）裝入第4個磁帶機
 2 Loading media from Storage Element 1 into drive 3...done
 3 [root@classroom share]# tar zcvf /dev/nst0  install.log　　　　--將檔案寫入磁帶
 4 [root@classroom G03001TA]# mt -f /dev/nst0 tel　　　　　　　　　 --檢視磁頭停止位置
 5 At block 3319.
 6 [root@classroom share]# mt -f /dev/nst0 rewind 　　　　　　　　　--倒帶
 7 [root@classroom share]# mt -f /dev/nst0 tel 
 8 At block 0.
 9 [root@classroom share]# mt -f /dev/nst0 fsf 1 　　　　　　　　　--前進到下一個塊
10 [root@classroom share]# mt -f /dev/nst0 tel 
11 At block 3319.
12 [root@classroom share]# mt -f /dev/st0  rewind
13 [root@classroom share]# mt -f /dev/st0  erase 　　　　　　　　　--清洗磁帶
14 [root@classroom share]# mt -f /dev/st0  tel 
15 At block 0.
16 [root@classroom share]# mtx -f /dev/sg12  unload  1 3 　　　　--拔出磁帶
17 Unloading drive 3 into Storage Element 1...done

版權宣告：本文為博主原創文章，轉載請附上博文連結！