Ubuntu16.04下配置VScode的C/C++開發環境
1. Vscode安裝
Visual studio code是微軟釋出的一個運行於 Mac OS X、Windows和 Linux 之上的,針對於編寫現代 Web 和雲應用的跨平臺原始碼編輯器。第一種方式是從VScode官網下載.deb檔案,然後雙擊該檔案會開啟軟體中心進行安裝。
另一種方式是通過Terminal進行安裝,首先輸入下面三條語句安裝umake
:
sudo add-apt-repository ppa:ubuntu-desktop/ubuntu-make sudo apt-get update sudo apt-get install ubuntu-make
然後通過umake來安裝VScode:
umake web visual-studio-code
安裝完畢後即可開啟VScode,主介面如下:
2. Vscode環境配置
(1)安裝c/c++外掛
首先通過左邊欄的Extension欄目安裝C++外掛,操作如下圖:
(2)建立工程
由於VScode是以資料夾的形式管理工程的,因此我們首先新建一個資料夾,我這裡取名叫hello
。
然後通過VScode開啟此資料夾:
新建main.cpp檔案並輸入程式:
(3)更改配置檔案(launch.json)
點選左側的Debug按鈕,選擇新增配置(Add configuration),然後選擇C++(GDB/LLDB),將自動生成launch.json檔案,具體操作如下:
生成的預設json檔案如下:
// Use IntelliSense to learn about possible attributes. // Hover to view descriptions of existing attributes. // For more information,visit: https://go.microsoft.com/fwlink/?linkid=830387 "version": "0.2.0","configurations": [ { "name": "(gdb) Launch","type": "cppdbg","request": "launch","program": "enter program name,for example ${workspaceFolder}/a.out","args": [],"stopAtEntry": false,"cwd": "${workspaceFolder}","environment": [],"externalConsole": true,"MIMode": "gdb","setupCommands": [ { "description": "Enable pretty-printing for gdb","text": "-enable-pretty-printing","ignoreFailures": true } ] } ] }
注意:這裡需要將program
項的內容改為除錯時執行的程式,將其改為main.out
即可。具體更改如下:
"program": "enter program name,
改為
"program": "${workspaceFolder}/main.out",
該語句指的是當前工作資料夾下的main.out
檔案,更改完畢的launch.json
檔案見附錄。
(4)新增構建(編譯、連結等)任務(tasks.json)
為了方便在VScode裡編譯C++程式碼,我們可以將類似g++ -g main.cpp
等g++命令寫入VScode的任務系統。首先,利用快捷鍵ctrl+shift+p開啟命令列,輸入Tasks: Run task
,會出現如下提示:
No task to run found. configure tasks...
回車,然後依次選擇如下:
Create tasks.json file from template
Others Example to run an arbitrary external command.
生成預設的tasks.json
檔案如下:
{ // See https://go.microsoft.com/fwlink/?LinkId=733558 // for the documentation about the tasks.json format "version": "2.0.0","tasks": [ { "label": "echo","type": "shell","command": "echo Hello" } ] }
這裡的label
為任務名,我們將”label"= "echo"
改為”label"= "build"
。由於我們的指令是g++
,這裡將”command“=”echo Hello“
改為”command“=”g++“
。然後新增g++
的引數args
。如果我們的g++指令為:g++ -g main.cpp
,這裡可以把引數設定為如下:
{ "tasks": [ { "label": "build","command": "g++","args": ["-g","${file}"] } ] }
如果我們想配置g++指令為:g++ -g main.cpp -std=c++11 -o main.out
,則引數可設定為:
{ "tasks": [ { "label": "build","${file}","-std=c++11","-o","${fileBasenameNoExtension}.out"] } ] }
我們可以通過舉一反三來配置不同的g++指令。完整的tasks.json檔案可參考附錄。
(5)簡單斷點除錯
經過上述配置之後就可以對我們寫的程式進行簡單的配置。在進行下面的操作前,我們應當保證launch.json
和tasks.json
的正確性並且已經成功儲存。
使用快捷鍵ctrl+shift+p調出命令列,選擇執行我們的build
任務,build成功後,點選開始除錯。具體操作如下:
值得注意的是,這裡如果每次更改了程式需要重新build,然後再進行除錯;如果直接進行除錯則執行的是上次build的結果。通過在launc.json作如下更改可以使得每次除錯之前會自動進行build:
這裡在launch.json檔案中添加了”preLaunchTask“=”build"
,也就是新增一個launch之間的任務,任務名為build
,這個build
就是我們在tasks.json中設定的任務名。
3.總結及注意事項
本文對Ubuntu16.04系統下配置基於VScode的C/C++開發環境進行了簡單的介紹,主要步驟為:
1.安裝VScode,可以通過在官網下載和命令列的方式進行安裝。(順便提一下,在命令列安裝的過程中可能會讓你輸入a)
2.新建C/C++工程,VScode以資料夾為管理工程的方式,因此需要建立一個資料夾來儲存工程。
3.配置launch.json檔案,它是一個啟動配置檔案。需要進行修改地方的是指定執行的檔案,其次我們還可以在裡面新增build任務。
4.配置tasks.json檔案,這個檔案用來方便使用者自定義任務,我們可以通過這個檔案來新增g++/gcc或者是make命令,方便我們編譯程式。
5.上述四個流程完了之後我們就可以進行基礎的C/C++開發與除錯了。
4. 附錄
這裡給出一個較完整的配置檔案和任務檔案,筆者的系統的Ubuntu16.04 LTS,測試時間是2018/11/14。由於版本不同可能會有所變化,因此該配置僅供參考!
(1)launch.json
{ // Use IntelliSense to learn about possible attributes. // Hover to view descriptions of existing attributes. // For more information,"program": "${workspaceFolder}/${fileBasenameNoExtension}.out","preLaunchTask": "build","ignoreFailures": true } ] } ] }
(2)tasks.json
{ // See https://go.microsoft.com/fwlink/?LinkId=733558 // for the documentation about the tasks.json format "version": "2.0.0","tasks": [ { "label": "build","${fileBasenameNoExtension}.out"] } ] }
總結
到此這篇關於Ubuntu16.04下配置VScode的C/C++開發環境的文章就介紹到這了,更多相關Ubuntu16.04下配置VScode的C/C++開發環境內容請搜尋我們以前的文章或繼續瀏覽下面的相關文章希望大家以後多多支援我們!