使用python檢查yaml配置檔案是否符合要求
阿新 • • 發佈:2020-04-10
我就廢話不多說了,大家還是直接看程式碼吧!
# coding=utf-8 import logging import yaml import os import sys reload(sys) sys.setdefaultencoding("utf-8") # 獲取當前目錄的路徑 cur_dir = os.path.abspath('.') def check_dt_pacsscp(config): """ 用來檢查檔案配置是否正確 """ #將配置config.yaml配置檔案以字典方式讀取 dts_method = config['service']['method'] dts_dup_check = config['service']['pacsscp_dup_check_off'] dts_interval = config['scheduler']['interval'] #判斷對接方式是否是pacsscp if dts_method == 'pacsscp': if dts_dup_check == True and dts_interval == 3: return True else: return False else: #列印error級別的錯誤 print "\033[31m Error:method not is pacsscp!!!\033[0m" return False if __name__ == "__main__": # 載入yaml配置 config_yaml = os.path.join(cur_dir,'config.yaml') with open(config_yaml,'rt') as f: config = yaml.safe_load(f.read()) #dt相關路徑和配置 dt_path = config['path']['docking-toolbox'] dt_config_path = os.path.join(dt_path,'config.yaml') with open(dt_config_path,'rt') as f: dt_config = yaml.safe_load(f.read()) if check_dt_pacsscp(dt_config): print (u"\033[32m 校驗通過~\033[0m") else: print (u'\033[32m 校驗未通過,請檢查配置!\033[0m ')
以下是用正則獲取不是yaml配置檔案的
# coding=utf-8 """ 作業要求,完善check_txpacs_version函式 """ import logging import traceback import yaml import os import sys import re reload(sys) sys.setdefaultencoding("utf-8") # 獲取當前目錄的路徑 cur_dir = os.path.abspath('.') def check_txpacs_version(config,constant): """ 高難度 校驗txpacs版本,若版本<1.4,則回撥中不能出現received_start_timestamp和received_end_timestamp這兩個引數,若不合法列印error級別的提示; 校驗txpacs的自動清理功能是否合法: 若dt版本<1.3.8,則不做要求,若dt版本>=1.3.8,則要求txpacs版本必須為1.5.1及以上版本,且txpacs配置的clean_date需配置為正整數 (docking-toolbox的版本號可以從檔案'docking-toolbox/toolbox/utils/constant.py'中讀取),若不合法列印error級別的提示. 根據以上結果,返回返回值. :param config: txpacs的配置 :param constant: docking-toolbox/toolbox/utils/constant.py檔案內容 :return: True: 通過 False: 不通過 """ # 獲取txpacs的版本號 jar_file = os.listdir(txpacs_path) jar_file.sort(reverse=True) jar_ver = jar_file[0] jar_version = re.search('txpacs-(.*?).jar',jar_ver) #txpacs的版本號 txpacs_version = jar_version.group(1) #docking-tools的版本號 dt_version = re.search('DT_VERSIONS.*?"(.*?)"',constant).group(1) #開啟txpacs的配置檔案 with open(txpacs_config_path,'rt') as f: txpacs_file = f.read() #判斷txpacs的版本號是否小於1.4 if txpacs_version < '1.4': #判斷received_start_timestamp" and "received_end_timestamp"兩個引數是否出現在txpacs配置檔案中 if "received_start_timestamp" and "received_end_timestamp" not in txpacs_file: return True else: print "\033[31m Error:當前的txpacs版本號是txpacs-%s,不應該存在received_start_timestamp和received_end_timestamp\033[0m"%txpacs_version return False #如果txpacs版本號大於等於1.4 else: #判斷DT版本是否大於1.3.8 if dt_version >= '1.3.8': if txpacs_version >= '1.5.1': if config['store']['clean_date'] > 0: return True else: print "\033[31m Error:txpacs配置檔案中clean_date應為正整數 \033[0m" return False else: print "\033[31m Error:當前DT版本大於1.3.8,txpacs版本必須大於等於1.5.1\033[0m" return False else: return True if __name__ == "__main__": # 載入yaml配置 config_yaml = os.path.join(cur_dir,'rt') as f: config = yaml.safe_load(f.read()) # txpacs相關路徑和配置 txpacs_path = config['path']['txpacs'] txpacs_config_path = os.path.join(txpacs_path,'conf.yml') with open(txpacs_config_path,'rt') as f: txpacs_config = yaml.safe_load(f.read()) # dt相關路徑和配置 dt_path = config['path']['docking-toolbox'] dt_constant_path = os.path.join(dt_path,'toolbox','utils','constant.py') with open(dt_constant_path,'rt') as f: dt_constant = f.read() if check_txpacs_version(txpacs_config,dt_constant): print (u"\033[32m 校驗通過~\033[0m") else: print (u'\033[32m 校驗未通過,請檢查配置! \033[0m')
以上這篇使用python檢查yaml配置檔案是否符合要求就是小編分享給大家的全部內容了,希望能給大家一個參考,也希望大家多多支援我們。