1、刪除node節點

執行kubectl delete node node01

2、這時如果直接執行加入，會報錯。如下：

[root@k8s-node02 pki]# kubeadm join 192.168.140.128:6443 --token abcdef.0123456789abcdef   --discovery-token-ca-cert-hash sha256:a3d9827be411208258aea7f3ee9aa396956c0a77c8b570503dd677aa3b6eb6d8 
[preflight] Running pre-flight checks
 [WARNING SystemVerification]: this 
 
docker version is not on the list of validated versions: 19.03.12. Latest validated version: 18.09
error execution phase preflight: [preflight] Some fatal errors occurred:
 [ERROR FileAvailable--etc-kubernetes-kubelet.conf]: /etc/kubernetes/kubelet.conf already exists
 [ERROR FileAvailable--etc-kubernetes-bootstrap-kubelet.conf]: /etc/kubernetes/bootstrap-kubelet.conf already exists
 [ERROR Port-10250]: Port 10250 is in use
 [ERROR FileAvailable--etc-kubernetes-pki-ca.crt]: /etc/kubernetes/pki/ca.crt already exists
[preflight] If you know what you are doing,you can make a check non-fatal with `--ignore-preflight-errors=...`

解決方案：

根據報錯可以看到埠被佔用，配置檔案可ca證書已經生成，所以需要刪除這些配置檔案和證書，並且kill掉佔用的埠。建議刪除之前先備份。

[root@k8s-node02 pki]# lsof -i:10250
COMMAND PID USER  FD  TYPE DEVICE SIZE/OFF NODEwww.cppcns.com NAME
kubelet 694 root  3QPsOjErwFt0u IPv6 26021   0t0 TCP *:10250 (LISTEN)
[root@k8s-node02 pki]# kill -9 694
[root@k8s-node02 pki]# cd /etwww.cppcns.com
 
c/kubernetes/
[root@k8s-node02 kubernetes]# ls
bootstrap-kubelet.conf kubelet.conf manifests pki
[root@k8s-node02 kubernetes]# mv bootstrap-kubelet.conf bootstrap-kubelet.conf_bk
[root@k8s-node02 kubernetes]# mv kubelet.conf kubelet.conf_bk
[root@k8s-node02 kubernetes]# cd pki/
[root@k8s-node02 pki]# ls
ca.crt
[root@k8s-node02 pki]# rm -rf ca.crt 

3、再次執行加入，又出現報錯。

[root@k8s-node02 ~]# kubeadm join 192.168.140.128:6443 --token abcdef.0123456789abcdef   --discovery-token-ca-cert-hash sha256:a3d9827be411208258aea7f3ee9aa396956c0a77c8b570503dd677aa3b6eb6d8 
[preflight] Running pre-flight checks
 [WARNING SystemVerification]: this Docker version is not on the list of validated versions: 19.03.12. Latest validated version: 18.09
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
[kubelet-check] Initial timeout of 40s passed.
error execution phase kubelet-start: error uploading crisocket: timed out waiting for the condition

解決方案：

執行kubeadm reset子節點重置

[root@k8s-node02 ~]# kubeadm reset
[reset] WARNING: Changes made to this host by 'kubeadm init' or 'kubeadm join' will be reverted.
[reset] Are you sure you want to proceed? [y/N]: y
[preflight] Running pre-flight checks
W0710 10:22:57.487306  31093 removeetcdmember.go:79] [reset] No kubeadm config,using etcd pod spec to get data directory
[reset] No etcd config found. Assuming external etcd
[reset] Please,manually reset etcd to prevent further issues
[reset] Stopping the kubelet service
[reset] Unmounting mounted directories in "/var/lib/kubelet"
[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki]
[reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/http://www.cppcns.comkubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf]
[reset] Deleting contents of stateful directories: [/var/lib/kubelet /etc/cni/net.d /var/lib/dockershim /var/run/kubernetes]

The reset process does not reset or clean up iptables rules or IPVS tables.
If you wish to reset iptables,you must do so manually.
For example:
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

If your cluster was setup to utilize IPVS,run ipvsadm --clear (or similar)
to reset your system's IPVS tables.

The reset process does not clean your kubeconfig files and you must remove them manually.
Please,check the contents of the $HOME/.kube/config file.

4、最後執行加入，問題解決。

[root@k8s-node02 ~]# kubeadm join 192.168.140.128:6443 --token abcdef.0123456789abcdef   --discovery-token-ca-cert-hash sha256:a3d9827be411208258aea7f3ee9aa396956c0a77c8b570503dd677aa3b6eb6d8 
[preflight] Running pre-flight checks
 [WARNING SystemVerification]: this Docker version is not on the list of validated versions: 19.03.12. Latest validated version: 18.09
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was receiwww.cppcns.comved.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

5、檢視master節點，加入成功。

[root@k8s-master01 ~]# kubectl get nodes
NAME      STATUS  ROLES  AGE  VERSION
k8s-master01  Ready  master  120m  v1.15.1
k8s-node01   Ready  <none>  100m  v1.15.1
k8s-node02   Ready  <none>  83m  v1.15.1

到此這篇關於k8s node節點重新加入master叢集的實現的文章就介紹到這了,更多相關k8s node master叢集內容請搜尋我們以前的文章或繼續瀏覽下面的相關文章希望大家以後多多支援我們！