1.yum安裝supervisor

	yum install epel-release
	yum install supervisor
	//設定開機自動啟動
	systemctl enable supervisord

    1
    2
    3
    4

2.配置

	找到/etc/supervisord.conf配置檔案，開啟編輯內容如下

    1

; Sample supervisor config file.

[unix_http_server]
file=/var/run/supervisor/supervisor.sock ; (the path to the socket file)
;chmod=0700 ; sockef file mode (default 0700)
;chown=nobody:nogroup ; socket file uid:gid owner
;username=user ; (default is no username (open server))
;password=123 ; (default is no password (open server))

;[inet_http_server] ; inet (TCP) server disabled by default
;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface)
;username=user ; (default is no username (open server))
;password=123 ; (default is no password (open server))

[supervisord]
logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10 ; (num of main logfile rotation backups;default 10)
loglevel=info ; (log level;default info; others: debug,warn,trace)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false ; (start in foreground if true;default false)
minfds=1024 ; (min. avail startup file descriptors;default 1024)
minprocs=200 ; (min. avail process descriptors;default 200)
;umask=022 ; (process file creation umask;default 022)
;user=chrism ; (default is current user, required if root)
;identifier=supervisor ; (supervisord identifier, default is ‘supervisor’)
;directory=/tmp ; (default is not to cd during start)
;nocleanup=true ; (don’t clean up tempfiles at start;default false)
;childlogdir=/tmp ; (‘AUTO’ child log dir, default $TEMP)
;environment=KEY=value ; (key value pairs to add to environment)
;strip_ansi=false ; (strip ansi escape codes in logs; def. false)

; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface

[supervisorctl]
serverurl=unix:///var/run/supervisor/supervisor.sock ; use a unix:// URL for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris ; should be same as http_username if set
;password=123 ; should be same as http_password if set
;prompt=mysupervisor ; cmd line prompt (default “supervisor”)
;history_file=~/.sc_history ; use readline history if available

; The below sample program section shows all possible program subsection values,
; create one or more ‘real’ program: sections to be able to control them under
; supervisor.

;[program:theprogramname]
;command=/bin/cat ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=999 ; the relative start priority (default 999)
;autostart=true ; start at supervisord start (default: true)
;autorestart=true ; retstart at unexpected quit (default: true)
;startsecs=10 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; ‘expected’ exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB ; number of bytes in ‘capturemode’ (default 0)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB ; number of bytes in ‘capturemode’ (default 0)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A=1,B=2 ; process environment additions (def no adds)
;serverurl=AUTO ; override serverurl computation (childutils)

; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more ‘real’
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.

;[eventlistener:theeventlistenername]
;command=/bin/eventlistener ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;events=EVENT ; event notif. types to subscribe to (req’d)
;buffer_size=10 ; event buffer queue size (default 10)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=-1 ; the relative start priority (default -1)
;autostart=true ; start at supervisord start (default: true)
;autorestart=unexpected ; restart at unexpected quit (default: unexpected)
;startsecs=10 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; ‘expected’ exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A=1,B=2 ; process environment additions
;serverurl=AUTO ; override serverurl computation (childutils)

; The below sample group section shows all possible group values,
; create one or more ‘real’ group: sections to create “heterogeneous”
; process groups.

;[group:thegroupname]
;programs=progname1,progname2 ; each refers to ‘x’ in [program:x] definitions
;priority=999 ; the relative start priority (default 999)

; The [include] section can just contain the “files” setting. This
; setting can list multiple files (separated by whitespace or
; newlines). It can also contain wildcards. The filenames are
; interpreted as relative to this file. Included files cannot
; include files themselves.

[include]
;files = supervisord.d/.ini
files = supervisord.d/.conf

配置資訊幾乎不用改動，只在結尾新增 files = supervisord.d/*.conf ，同時把 ;files = supervisord.d/*.ini 註釋掉

    1

下一步在/etc/supervisord.d目錄下建立配置檔案，例如test.conf，內容如下：
[program:queue]

	process_name=%(process_num)02d
	
	directory=/var/www/test     //專案的根目錄
	
	command=php think queue:work  --queue sendNotify --daemon
	
	autostart=true
	
	autorestart=true
	
	user=root
	
	numprocs=5
	
	redirect_stderr=true
	
	stdout_logfile=/var/www/test/runtime/queue/sendNotify.log   //日誌檔案，記得先建立目錄並給許可權

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17

3.啟動supervisor

supervisorctl -c /etc/supervisord.conf

    1

報錯，unix:///var/run/supervisor/supervisor.sock no such file

解決：
① sudo touch /var/run/supervisor/supervisor.sock
② sudo chmod 777 /var/run/supervisor/supervisor.sock

還是報錯，unix:///var/run/supervisor/supervisor.sock refused connection

解決：
① 嘗試重啟服務 service supervisord restart
② 還是報這個錯的話，檢查一下test.conf配置檔案是不是整錯了，路徑許可權之類的

4.再次啟動supervisor

supervisorctl -c /etc/supervisord.conf

    1

這個時候應該是正常的，如有報錯類似entered FATAL state, too many start retries too quickly的話，還是去檢查配置檔案，很有可能是寫法不對，比如command=php /var/www/test/think queue:work --queue sendNotify --daemon 而沒有directory=/var/www/test //專案的根目錄，在laravel專案中這樣寫是沒問題的，但是在tp5中不一定可以。我就是在這裡渡了劫，花費了大半天的時間，各種搜尋各種修改，太難受了。
————————————————

原文連結：https://blog.csdn.net/xiangweiqiang/article/details/105937166