springMvc 之 WebMvcConfigurer詳解
目錄
1. 簡介
2. WebMvcConfigurer介面
2.1 addInterceptors:攔截器
2.2 addViewControllers:頁面跳轉
2.3 addResourceHandlers:靜態資源
2.4 configureDefaultServletHandling:預設靜態資源處理器
2.5 configureViewResolvers:檢視解析器
2.6 configureContentNegotiation:配置內容裁決的一些引數
2.7 addCorsMappings:跨域
2.8 configureMessageConverters:資訊轉換器
1. 簡介
WebMvcConfigurer配置類其實是Spring
內部的一種配置方式,採用JavaBean
的形式來代替傳統的xml
配置檔案形式進行鍼對框架個性化定製,可以自定義一些Handler,Interceptor,ViewResolver,MessageConverter。基於java-based方式的spring mvc配置,需要建立一個配置類並實現WebMvcConfigurer
介面;
在Spring Boot 1.5版本都是靠重寫WebMvcConfigurerAdapter的方法來新增自定義攔截器,訊息轉換器等。SpringBoot 2.0 後,該類被標記為@Deprecated(棄用)。官方推薦直接實現WebMvcConfigurer或者直接繼承WebMvcConfigurationSupport,方式一實現WebMvcConfigurer介面(推薦),方式二繼承WebMvcConfigurationSupport類,具體實現可看這篇文章。https://blog.csdn.net/fmwind/article/details/82832758
2. WebMvcConfigurer介面
public interface WebMvcConfigurer { void configurePathMatch(PathMatchConfigurer var1); void configureContentNegotiation(ContentNegotiationConfigurer var1); void configureAsyncSupport(AsyncSupportConfigurer var1); void configureDefaultServletHandling(DefaultServletHandlerConfigurer var1); void addFormatters(FormatterRegistry var1); void addInterceptors(InterceptorRegistry var1); void addResourceHandlers(ResourceHandlerRegistry var1); void addCorsMappings(CorsRegistry var1); void addViewControllers(ViewControllerRegistry var1); void configureViewResolvers(ViewResolverRegistry var1); void addArgumentResolvers(List<HandlerMethodArgumentResolver> var1); void addReturnValueHandlers(List<HandlerMethodReturnValueHandler> var1); void configureMessageConverters(List<HttpMessageConverter<?>> var1); void extendMessageConverters(List<HttpMessageConverter<?>> var1); void configureHandlerExceptionResolvers(List<HandlerExceptionResolver> var1); void extendHandlerExceptionResolvers(List<HandlerExceptionResolver> var1); Validator getValidator(); MessageCodesResolver getMessageCodesResolver(); }
常用的方法:
/* 攔截器配置 */ void addInterceptors(InterceptorRegistry var1); /* 檢視跳轉控制器 */ void addViewControllers(ViewControllerRegistry registry); /** *靜態資源處理 **/ void addResourceHandlers(ResourceHandlerRegistry registry); /* 預設靜態資源處理器 */ void configureDefaultServletHandling(DefaultServletHandlerConfigurer configurer); /** * 這裡配置檢視解析器 **/ void configureViewResolvers(ViewResolverRegistry registry); /* 配置內容裁決的一些選項*/ void configureContentNegotiation(ContentNegotiationConfigurer configurer); /** 解決跨域問題 **/ public void addCorsMappings(CorsRegistry registry) ;
2.1 addInterceptors:攔截器
- addInterceptor:需要一個實現HandlerInterceptor介面的攔截器例項
- addPathPatterns:用於設定攔截器的過濾路徑規則;
addPathPatterns("/**")
對所有請求都攔截 - excludePathPatterns:用於設定不需要攔截的過濾規則
- 攔截器主要用途:進行使用者登入狀態的攔截,日誌的攔截等。
@Override public void addInterceptors(InterceptorRegistry registry) { super.addInterceptors(registry); registry.addInterceptor(new TestInterceptor()).addPathPatterns("/**").excludePathPatterns("/emp/toLogin","/emp/login","/js/**","/css/**","/images/**"); }
2.2 addViewControllers:頁面跳轉
以前寫SpringMVC的時候,如果需要訪問一個頁面,必須要寫Controller類,然後再寫一個方法跳轉到頁面,感覺好麻煩,其實重寫WebMvcConfigurer中的addViewControllers方法即可達到效果了
@Override public void addViewControllers(ViewControllerRegistry registry) { registry.addViewController("/toLogin").setViewName("login"); }
值的指出的是,在這裡重寫addViewControllers方法,並不會覆蓋WebMvcAutoConfiguration(Springboot自動配置)中的addViewControllers(在此方法中,Spring Boot將“/”對映至index.html),這也就意味著自己的配置和Spring Boot的自動配置同時有效,這也是我們推薦新增自己的MVC配置的方式。
2.3 addResourceHandlers:靜態資源
比如,我們想自定義靜態資源對映目錄的話,只需重寫addResourceHandlers方法即可。
注:如果繼承WebMvcConfigurationSupport類實現配置時必須要重寫該方法
@Configuration public class MyWebMvcConfigurerAdapter implements WebMvcConfigurer { /** * 配置靜態訪問資源 * @param registry */ @Override public void addResourceHandlers(ResourceHandlerRegistry registry) { registry.addResourceHandler("/my/**").addResourceLocations("classpath:/my/"); } }
- addResoureHandler:指的是對外暴露的訪問路徑
- addResourceLocations:指的是內部檔案放置的目錄
2.4 configureDefaultServletHandling:預設靜態資源處理器
@Override public void configureDefaultServletHandling(DefaultServletHandlerConfigurer configurer) { configurer.enable(); configurer.enable("defaultServletName"); }
此時會註冊一個預設的Handler:DefaultServletHttpRequestHandler,這個Handler也是用來處理靜態檔案的,它會嘗試對映/。當DispatcherServelt對映/時(/ 和/ 是有區別的),並且沒有找到合適的Handler來處理請求時,就會交給DefaultServletHttpRequestHandler 來處理。注意:這裡的靜態資源是放置在web根目錄下,而非WEB-INF 下。
可能這裡的描述有點不好懂(我自己也這麼覺得),所以簡單舉個例子,例如:在webroot目錄下有一個圖片:1.png 我們知道Servelt規範中web根目錄(webroot)下的檔案可以直接訪問的,但是由於DispatcherServlet配置了對映路徑是:/ ,它幾乎把所有的請求都攔截了,從而導致1.png 訪問不到,這時註冊一個DefaultServletHttpRequestHandler 就可以解決這個問題。其實可以理解為DispatcherServlet破壞了Servlet的一個特性(根目錄下的檔案可以直接訪問),DefaultServletHttpRequestHandler是幫助迴歸這個特性的。
2.5 configureViewResolvers:檢視解析器
這個方法是用來配置檢視解析器的,該方法的引數ViewResolverRegistry 是一個註冊器,用來註冊你想自定義的檢視解析器等。ViewResolverRegistry 常用的幾個方法:https://blog.csdn.net/fmwind/article/details/81235401
/** * 配置請求檢視對映 * @return */ @Bean public InternalResourceViewResolver resourceViewResolver() { InternalResourceViewResolver internalResourceViewResolver = new InternalResourceViewResolver(); //請求檢視檔案的字首地址 internalResourceViewResolver.setPrefix("/WEB-INF/jsp/"); //請求檢視檔案的字尾 internalResourceViewResolver.setSuffix(".jsp"); return internalResourceViewResolver; } /** * 檢視配置 * @param registry */ @Override public void configureViewResolvers(ViewResolverRegistry registry) { super.configureViewResolvers(registry); registry.viewResolver(resourceViewResolver()); /*registry.jsp("/WEB-INF/jsp/",".jsp");*/ }
2.6 configureContentNegotiation:配置內容裁決的一些引數
2.7 addCorsMappings:跨域
@Override public void addCorsMappings(CorsRegistry registry) { super.addCorsMappings(registry); registry.addMapping("/cors/**") .allowedHeaders("*") .allowedMethods("POST","GET") .allowedOrigins("*"); }
2.8 configureMessageConverters:資訊轉換器
/** * 訊息內容轉換配置 * 配置fastJson返回json轉換 * @param converters */ @Override public void configureMessageConverters(List<HttpMessageConverter<?>> converters) { //呼叫父類的配置 super.configureMessageConverters(converters); //建立fastJson訊息轉換器 FastJsonHttpMessageConverter fastConverter = new FastJsonHttpMessageConverter(); //建立配置類 FastJsonConfig fastJsonConfig = new FastJsonConfig(); //修改配置返回內容的過濾 fastJsonConfig.setSerializerFeatures( SerializerFeature.DisableCircularReferenceDetect, SerializerFeature.WriteMapNullValue, SerializerFeature.WriteNullStringAsEmpty ); fastConverter.setFastJsonConfig(fastJsonConfig); //將fastjson新增到檢視訊息轉換器列表內 converters.add(fastConverter); }
參考:https://blog.csdn.net/fmwind/article/details/81235401
參考:https://blog.csdn.net/weixin_43453386/article/details/83623242#1addInterceptors_32