java圖形化介面實現簡單混合運算計算器的示例程式碼
阿新 • • 發佈:2020-01-07
寫了好幾天了終於寫完了這個四則運算計算器,總程式碼放在後面
截圖如下:
首先是佈局都比較簡單,最上面的一個框是總的輸出框,
第二個框是每次輸入的數字顯示在框內,
對於每一個按鈕都增加監聽器,
對於數字按鈕:當長度大於8的 或者等號已經出現之後就不再處理按鈕事件
if(e.getSource().equals(button1)) { s=numberText.getText(); //數字長度大於8或者等號已出現 if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("1"); }else { numberText.setText(s + "1"); } }
其餘的按鈕都差不多。
當按鈕為小數點時,長度大於7就不再處理,因為總的長度不能超過8,而小數點後面還要與數字,
同時標記小數點已經出現過,因為一個數中最多出現一個小數點
//當按鈕為小數點時 if(e.getSource().equals(buttonpoint)) { s=numberText.getText(); if(s.length()>7 || equalbook == 1) { } if(pointbook==0) { numberText.setText(s + "."); pointbook = 1; } }
當按鈕為加號時:
當數字輸入框為空時不做處理
也有可能是最後一位是小數點,當然也不處理
當最上方的輸出框的最後一位是右括號的時候,可以用加號
//當按鈕為加號時 if(e.getSource().equals(buttonadd)) { s=numberText.getText(); char ch1[] = s.toCharArray(); int length1 = s.length() - 1; String S = expressText.getText(); char ch2[] = S.toCharArray(); int length2 = S.length() - 1; //當數字為空或為0或數字的最後一位是小數點時不作處理 if((length2 == -1 ||ch2[length2] != ')') && (s.equals("0") || s.equals("") || ch1[length1] == '.')) { }else { numberText.setText(""); expressText.setText(expressText.getText() + s + "+"); } }
+, -, *, /都差不多
當前面是運算子或者左括號的時候才能用左括號, 注意當框內無元素的時候也可以加左括號, 但是需要判斷元素的個數是否大於0
if(e.getSource().equals(buttonleft)) { if(!numberText.getText().equals("0") && !numberText.getText().contentEquals("")) { expressText.setText(expressText.getText() + numberText.getText()); } s=expressText.getText(); char ch[] = s.toCharArray(); int length = s.length() - 1; /* * 當前面是運算子或者左括號的時候才能用左括號 * 注意當框內無元素的時候也可以加左括號 * 但是需要判斷元素的個數是否大於0 */ if(length == -1 || ch[length] == '+' || ch[length] == '-' || ch[length] == '*' || ch[length] == '/' || ch[length] == '(' || s.equals("")) { expressText.setText(expressText.getText() + '('); leftNum++; } }
右括號就不一樣
if(e.getSource().equals(buttonright)) { if(!numberText.getText().equals("0")) { expressText.setText(expressText.getText() + numberText.getText()); numberText.setText(""); } s=expressText.getText(); char ch[] = s.toCharArray(); int length = s.length() - 1; /* * 只有前面是數字的時候且左括 * 號的數量大於右括號的數量的時候才能加右括號 */ if(Character.isDigit(ch[length]) && leftNum > rightNum) { rightNum++; expressText.setText(expressText.getText() + ')'); } }
當按鈕為 C時,清除所有內容並更新等號狀態,左括號數量,右括號數量,小數點狀態,當一次計算完成之後,只有按C按鈕才能進行新的計算。
當按鈕為CE時,只清除數字框中的內容。
if(e.getSource().equals(buttonC)) { numberText.setText("0"); expressText.setText(""); leftNum = 0; rightNum = 0; pointbook = 0; equalbook = 0; }
當按鈕為等號時就把總輸出框中顯示的字串取出進行計算,因為這個計算器是帶括號的,所以這裡我用了逆波蘭表示式做的,需要把中綴表示式變為字尾表示式,然後進行計算,這一點我認為是最困難的一點,後面有時間我會再寫關於 逆波蘭表示式實現以及 逆波蘭表示式的求值。
需要注意588行的程式碼,最後的兩個括號的條件沒有加上,導致花了週末一天在找bug......
else if((ch[j] == '*' || ch[j] == '/') && (operater1=='+' || operater1=='-') || (operater1=='(' || operater1 == ')')) { Operater.push(ch[j]); break; }
所有程式碼:
package cn.edu.shengda; /* * author 201705050153 張宜強 */ import java.awt.Color; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.util.Stack; import javax.swing.JButton; import javax.swing.JFrame; import javax.swing.JTextField; public class Calculator extends JFrame implements ActionListener { Calculator() { init(); } public void init() { JFrame frame = new JFrame ("計算器"); frame.setBackground(Color.yellow); frame.setLayout(null); //放置數字0 button0 = new JButton("0"); button0.setBounds(20,200,100,25); frame.add(button0); //放置數字1 button1 = new JButton("1"); button1.setBounds(20,170,45,25); frame.add(button1); //放置數字2 button2 = new JButton("2"); button2.setBounds(75,25); frame.add(button2); //放置數字3 button3 = new JButton("3"); button3.setBounds(130,25); frame.add(button3); //放置數字4 button4 = new JButton("4"); button4.setBounds(20,140,25); frame.add(button4); //放置數字5 button5 = new JButton("5"); button5.setBounds(75,25); frame.add(button5); //放置數字6 button6 = new JButton("6"); button6.setBounds(130,25); frame.add(button6); //放置數字7 button7 = new JButton("7"); button7.setBounds(20,110,25); frame.add(button7); //放置數字8 button8 = new JButton("8"); button8.setBounds(75,25); frame.add(button8); //放置數字9 button9 = new JButton("9"); button9.setBounds(130,25); frame.add(button9); //放置 . buttonpoint = new JButton("."); buttonpoint.setBounds(130,25); frame.add(buttonpoint); //放置 + buttonadd = new JButton("+"); buttonadd.setBounds(185,25); frame.add(buttonadd); //放置 - buttonreduce = new JButton("-"); buttonreduce.setBounds(185,25); frame.add(buttonreduce); //放置 * buttonride = new JButton("*"); buttonride.setBounds(185,25); frame.add(buttonride); //放置 / buttonexcept = new JButton("/"); buttonexcept.setBounds(185,25); frame.add(buttonexcept); //放置 = buttonequal = new JButton("="); buttonequal.setBounds(240,55,55); frame.add(buttonequal); //計算1/x buttoninvert = new JButton("1/x"); buttoninvert.setBounds(240,55); frame.add(buttoninvert); //放置左括號 buttonleft = new JButton("("); buttonleft.setBounds(20,80,25); frame.add(buttonleft); //放置右括號 buttonright = new JButton(")"); buttonright.setBounds(75,25); frame.add(buttonright); //放置C 消除所有輸入 buttonC = new JButton("C"); buttonC.setBounds(130,75,25); frame.add(buttonC); //放置CE 消除當前輸入 buttonCE = new JButton("CE"); buttonCE.setBounds(220,25); frame.add(buttonCE); //新增表示式文字框 expressText = new JTextField(); expressText.setBounds(20,10,300,30); frame.add(expressText); //新增數字文字框 numberText = new JTextField("0"); numberText.setBounds(20,40,30); frame.add(numberText); //加監聽器 button0.addActionListener(this); button1.addActionListener(this); button2.addActionListener(this); button3.addActionListener(this); button4.addActionListener(this); button5.addActionListener(this); button6.addActionListener(this); button7.addActionListener(this); button8.addActionListener(this); button9.addActionListener(this); buttonpoint.addActionListener(this); buttonadd.addActionListener(this); buttonreduce.addActionListener(this); buttonride.addActionListener(this); buttonexcept.addActionListener(this); buttoninvert.addActionListener(this); buttonequal.addActionListener(this); buttonleft.addActionListener(this); buttonright.addActionListener(this); buttonC.addActionListener(this); buttonCE.addActionListener(this); numberText.addActionListener(this); expressText.addActionListener(this); frame.setBounds(0,350,300); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setVisible(true); } JButton button0; JButton button1; JButton button2; JButton button3; JButton button4; JButton button5; JButton button6; JButton button7; JButton button8; JButton button9; JButton buttonpoint; JButton buttonadd; JButton buttonreduce; JButton buttonride; JButton buttonexcept; JButton buttonequal; JButton buttoninvert; JButton buttonleft; JButton buttonright; JButton buttonC; JButton buttonCE; JTextField numberText; JTextField expressText; String s = null; //記錄小數點是否出現,每次當前數字框中只能出現一個小數點 int pointbook = 0; //記錄等號是否出現,每次計算的總算式只能出現一個等號 int equalbook = 0; //記錄左括號的數量 int leftNum = 0; //記錄有括號的數量 int rightNum = 0; @Override public void actionPerformed(ActionEvent e) { // TODO Auto-generated method stub //當按鈕為0時 if(e.getSource().equals(button0)) { s=numberText.getText(); if(s.length()>8) { } else if(s.equals("0") || equalbook == 1) { }else { numberText.setText(s + "0"); } } //當按鈕為1時 if(e.getSource().equals(button1)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("1"); }else { numberText.setText(s + "1"); } } //當按鈕為2時 if(e.getSource().equals(button2)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("2"); }else { numberText.setText(s + "2"); } } //當按鈕為3時 if(e.getSource().equals(button3)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("3"); }else { numberText.setText(s + "3"); } } //當按鈕為4時 if(e.getSource().equals(button4)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("4"); }else { numberText.setText(s + "4"); } } //當按鈕為5時 if(e.getSource().equals(button5)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("5"); }else { numberText.setText(s + "5"); } } //當按鈕為6時 if(e.getSource().equals(button6)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("6"); }else { numberText.setText(s + "6"); } } //當按鈕為7時 if(e.getSource().equals(button7)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("7"); }else { numberText.setText(s + "7"); } } //當按鈕為3時 if(e.getSource().equals(button8)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("8"); }else { numberText.setText(s + "8"); } } //當按鈕為9時 if(e.getSource().equals(button9)) { s=numberText.getText(); if(s.length()>8 || equalbook == 1) { } else if(s.equals("0") || s.equals("")) { numberText.setText("9"); }else { numberText.setText(s + "9"); } } //當按鈕為小數點時 if(e.getSource().equals(buttonpoint)) { s=numberText.getText(); if(s.length()>7 || equalbook == 1) { } if(pointbook==0) { numberText.setText(s + "."); pointbook = 1; } } //當按鈕為加號時 if(e.getSource().equals(buttonadd)) { s=numberText.getText(); char ch1[] = s.toCharArray(); int length1 = s.length() - 1; String S = expressText.getText(); char ch2[] = S.toCharArray(); int length2 = S.length() - 1; //當數字為空或為0或數字的最後一位是小數點時不作處理 if((length2 == -1 ||ch2[length2] != ')') && (s.equals("0") || s.equals("") || ch1[length1] == '.')) { }else { numberText.setText(""); expressText.setText(expressText.getText() + s + "+"); } } //當按鈕為減號時 if(e.getSource().equals(buttonreduce)) { s=numberText.getText(); char ch1[] = s.toCharArray(); int length1 = s.length() - 1; String S = expressText.getText(); char ch2[] = S.toCharArray(); int length2 = S.length() - 1; if((length2 == -1 ||ch2[length2] != ')') && (s.equals("0") || s.equals("") || ch1[length1]=='.')) { }else { numberText.setText(""); expressText.setText(expressText.getText() + s + "-"); } } //當按鈕為乘號時 if(e.getSource().equals(buttonride)) { s=numberText.getText(); char ch1[] = s.toCharArray(); int length1 = s.length() - 1; String S = expressText.getText(); char ch2[] = S.toCharArray(); int length2 = S.length() - 1; if((length2 == -1 ||ch2[length2] != ')') && (s.equals("0") || s.equals("") || ch1[length1]=='.')) { }else { numberText.setText(""); expressText.setText(expressText.getText() + s + "*"); } } //當按鈕為除號時 if(e.getSource().equals(buttonexcept)) { s=numberText.getText(); char ch1[] = s.toCharArray(); int length1 = s.length() - 1; String S = expressText.getText(); char ch2[] = S.toCharArray(); int length2 = S.length() - 1; if((length2 == -1 ||ch2[length2] != ')') && (s.equals("0") || s.equals("") || ch1[length1]=='.')) { }else { numberText.setText(""); expressText.setText(expressText.getText() + s + "/"); } } //當按鈕為左括號時 if(e.getSource().equals(buttonleft)) { if(!numberText.getText().equals("0") && !numberText.getText().contentEquals("")) { expressText.setText(expressText.getText() + numberText.getText()); } s=expressText.getText(); char ch[] = s.toCharArray(); int length = s.length() - 1; /* * 當前面是運算子或者左括號的時候才能用左括號 * 注意當框內無元素的時候也可以加左括號 * 但是需要判斷元素的個數是否大於0 */ if(length == -1 || ch[length] == '+' || ch[length] == '-' || ch[length] == '*' || ch[length] == '/' || ch[length] == '(' || s.equals("")) { expressText.setText(expressText.getText() + '('); leftNum++; } } //當按鈕為右括號時 if(e.getSource().equals(buttonright)) { if(!numberText.getText().equals("0")) { expressText.setText(expressText.getText() + numberText.getText()); numberText.setText(""); } s=expressText.getText(); char ch[] = s.toCharArray(); int length = s.length() - 1; /* * 只有前面是數字的時候且左括 * 號的數量大於右括號的數量的時候才能加右括號 */ if(Character.isDigit(ch[length]) && leftNum > rightNum) { rightNum++; expressText.setText(expressText.getText() + ')'); } } /* *當按鈕為 C時 *清除所有內容 *並更新等號狀態,小數點狀態 *當一次計算完成之後,只有按CE按鈕才能進行新的計算 */ if(e.getSource().equals(buttonC)) { numberText.setText("0"); expressText.setText(""); leftNum = 0; rightNum = 0; pointbook = 0; equalbook = 0; } /* *當按鈕為CE時,*清除當前數字框中內容 *更新小數點狀態 */ if(e.getSource().equals(buttonCE)) { numberText.setText("0"); pointbook = 0; } //當按鈕為1/x時把輸入框中的值變為倒數 if(e.getSource().equals(buttoninvert) ) { s = numberText.getText(); //等於0的時候不進行操作 if(s.equals("0")) { }else { double a = Double.parseDouble(numberText.getText()); a = 1/a; numberText.setText(String.valueOf(a)); } } //當按鈕為等於號時 if(e.getSource().equals(buttonequal)) { s=numberText.getText(); if(!s.equals("0") && !s.equals("")) { expressText.setText(expressText.getText() + s); } //當等號沒有出現時才能輸入等號 if(equalbook == 0) { numberText.setText(""); //補全右括號 for(int i = 0; i < leftNum - rightNum; i++) { expressText.setText(expressText.getText() + ')'); } /* * 宣告棧 * 一個char型儲存運算子 * 將中綴表示式轉化為逆波蘭表示式 */ String[] ansString = new String[100]; int Size = 0; Stack<Character> Operater = new Stack<Character>(); s = expressText.getText(); char ch[] = s.toCharArray(); int length = ch.length; for(int j = 0; j < length; j++) { //當陣列元素為數字時 if(ch[j] >='0' && ch[j] <= '9') { double Number = ch[j] - '0'; //繼續往後遍歷,直到不是數字和小數點 //記錄小數點是否出現 int point = 0; //記錄小數點出現後的位數 int bit = 1; if(j==length-1) { ansString[Size++] = String.valueOf(Number); } for(j++; j<length; j++) { if((ch[j] < '0' || ch[j] >'9') && ch[j]!='.') { j--; ansString[Size++] = String.valueOf(Number); break; } if(ch[j] == '.') { point = 1; continue; } if(ch[j] >= '0' && ch[j] <= '9') { /* * 當小數點沒有出現時和沒出現時要分開討論 */ if(point == 0) { Number = Number * 10 + (ch[j] - '0'); } else { Number = Number + Math.pow(10,-bit) * (ch[j]-'0'); bit++; } } } } else { //考慮運算子 if(ch[j] =='(') { Operater.push('('); } else if(ch[j]==')') { while(!Operater.peek().equals('(')) { ansString[Size++] = String.valueOf(Operater.peek()); Operater.pop(); } Operater.pop(); } else { if(Operater.empty()) { Operater.push(ch[j]); } else { //System.out.println("!" + ch[j]); while(true) { if(Operater.empty()) { Operater.push(ch[j]); break; } char operater1 = Operater.peek(); if((ch[j] == '*' || ch[j] == '/') && (operater1=='+' || operater1=='-') || (operater1=='(' || operater1 == ')')) { Operater.push(ch[j]); break; } else { ansString[Size++] = String.valueOf(Operater.peek()); Operater.pop(); } } } } } }//System.out.println(s); while(!Operater.empty()) { ansString[Size++] = String.valueOf(Operater.peek()); Operater.pop(); } // for(int i=0; i<Size; i++) // System.out.println(ansString[i]); //最後計算逆波蘭表示式的值 Stack<Double> Last = new Stack<Double>(); for(int i=0; i<Size; i++) { String s1 = ansString[i]; char ch2[] = s1.toCharArray(); if(ch2[0]>='0' && ch2[0]<='9') { Last.push(Double.parseDouble(s1)); } else { double num1 = Last.pop(); double num2 = Last.pop(); double num3 = 0; if(ch2[0]=='+') num3 = num2 + num1; else if(ch2[0]=='-') num3 = num2 - num1; else if(ch2[0]=='*') num3 = num2 * num1; else if(ch2[0]=='/') num3 = num2 / num1; Last.push(num3); } } expressText.setText(expressText.getText() + "=" + Last.pop()); equalbook = 1; } } } public static void main(String []args) { Calculator calculator = new Calculator(); } }
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支援我們。