Java常用位元組流和字元流例項彙總
IO流(輸入流、輸出流)
位元組流、字元流
1.位元組流:
- InputStream、OutputStream
- InputStream抽象了應用程式讀取資料的方式;
- OutputStream抽象了應用程式寫出資料的方式;
2.EOF=End 讀到-1就讀到結尾
3.輸入流的基本方法:
- int b=in.read();讀取一個位元組無符號填充到int低八位;-1是EOF;
- in.read(byte[] buf)
- in.read(byte[] buf,int start,int size)
4.輸出流基本方法:
- out.write(int b) 寫出一個byte到流,b的低8位;
- out.write(byte[] buf) 將buf位元組陣列都寫入到流;
- out.write(byte[] buf,int size)
5.FileInputStream--->具體實現了在檔案上讀取資料,下面請看最簡單的檔案讀取:
package com.wxd.test2; import java.io.FileInputStream; import java.io.IOException; public class IOUtil { /** * 讀取指定檔案內容,按照16進位制輸出到控制檯 * 並且每輸出10個byte換行 * @param fileName */ public static void printHex(String fileName) throws IOException { //把檔案作為位元組流進行讀操作 FileInputStream in =new FileInputStream(fileName); int b; int i=1; while ((b=in.read())!=-1){ if(b<=0xf){ //單位數前面補0 System.out.print(0); } System.out.print(Integer.toHexString(b)+" "); if(i++%10==0){ System.out.println(); } } in.close(); } }
6.FileOutputStream實現了向檔案中寫出byte資料的方法:
package com.wxd.test2; import java.io.FileOutputStream; import java.io.IOException; public class FileOutDemo1 { public static void main(String[] args) throws IOException{ //如果該檔案不存在則直接建立,如果存在刪除後建立 FileOutputStream out=new FileOutputStream("demo/out.dat"); out.write('A');//寫出了‘A'字元的低八位 out.write('B');//寫出了‘B'字元的低八位 int a=10;//write只能寫低八位寫一個int需要寫四次每次8位 out.write(a>>>24); out.write(a>>>16); out.write(a>>>8); out.write(a); byte[] zg="中國".getBytes("UTF-8"); out.write(zg); out.close(); IOUtil.printHex("demo/out.dat"); } }
7.DataOutputStream/DataInputStream對“流”功能的擴充套件,可以更加方便的讀取int,long,字元等型別資料:
writeInt()/writeDouble()/writeUTF()
package com.wxd.test2; import java.io.DataOutputStream; import java.io.FileOutputStream; import java.io.IOException; public class DosDemo { public static void main(String[] args) throws IOException { String file="demo/dos.dat"; DataOutputStream dos=new DataOutputStream(new FileOutputStream(file)); dos.writeInt(10); dos.writeInt(-10); dos.writeLong(10l); dos.writeDouble(10.5); //採用UTF-8編碼寫出 dos.writeUTF("中國"); //採用utf-16be編碼寫出 dos.writeChars("中國"); dos.close(); } }
package com.wxd.test2; import java.io.DataInputStream; import java.io.FileInputStream; import java.io.IOException; public class DisDemo { public static void main(String[] args) throws IOException { String file="demo/dos.dat"; DataInputStream dis=new DataInputStream(new FileInputStream(file)); int i=dis.readInt();//其實做了4次read,因為int是32位 System.out.println(i); i=dis.readInt(); System.out.println(i); long l=dis.readLong();//其實做了8次read,應為long是64位 System.out.println(l); double d=dis.readDouble(); System.out.println(d); String s=dis.readUTF(); System.out.println(s); dis.close(); } }
8.BufferedInputStream&BufferedOutputStrean這兩個流為IO提供了帶緩衝區的操作,一般開啟檔案進行寫入或讀取操作時,都會加上緩衝,這種流模式提高了IO效能
從應用程式中把資料放入檔案,相當於將一缸水倒入到另一個缸中:
- FileOutputStream--->write()方法相當於一滴一滴地把水轉移過去
- DataOutputStream--->writeXxx()方法會方便一些,相當於一瓢一瓢的把水轉移過去
- BufferedOutputStream--->write()方法相當於一瓢一瓢先放入桶中,再從桶中倒入缸中
/*** *進行檔案的拷貝,利用帶緩衝的位元組流 * @param srcFile * @param destFile * @throws IOException */ public static void copyFileByBuffer(File srcFile,File destFile) throws IOException{ if(!srcFile.exists()){ throw new IllegalArgumentException("檔案:"+srcFile+"不存在"); } if(!srcFile.isFile()){ throw new IllegalArgumentException(srcFile+"不是檔案!"); } BufferedInputStream bis=new BufferedInputStream(new FileInputStream(srcFile)); BufferedOutputStream bos=new BufferedOutputStream(new FileOutputStream(destFile)); int c; while ((c=bis.read())!=-1){ bos.write(c); bos.flush();//重新整理緩衝區,否則寫入不到; } bis.close(); bos.close(); }
字元流
1.編碼問題
2.認識文字和文字檔案
3.Java的文字(char)是16位無符號的整數,是字元的unicode編碼(雙位元組編碼)檔案是byte byte byte...的資料序列
文字檔案是文字(char)序列按照某種編碼方案(utf-8,utf-16be,gbk)序列化為byte的儲存
4.字元流(Reader Writer):--->操作的是文字檔案
字元的處理,一次處理一個字元
字元的底層任然是基本的位元組序列
字元流的基本實現
InputStreamReader 完成byte流解析為char流,按照編碼解析
OutputStreamWriter 提供char流到byte流,按照編碼處理
package com.wxd.test2; import java.io.*; public class IsrAndOswDemo { public static void main(String[] args) throws IOException{ //InputStreamReader被稱為橋樑流 FileInputStream in=new FileInputStream("demo\\test.txt");//預設專案的編碼,操作的時候要寫檔案本身的編碼 InputStreamReader isr=new InputStreamReader(in,"utf-8"); FileOutputStream out=new FileOutputStream("demo\\test2.txt"); OutputStreamWriter osw=new OutputStreamWriter(out,"utf-8"); // int c; // while ((c=isr.read())!=-1){ // System.out.print((char)c); // } char[] buffer=new char[8*1024]; int c; //批量讀取,放入buffer這個字元陣列,從第0個位置開始放置,最多放buffe.length個 //返回的是讀到的字元的個數 while ((c=isr.read(buffer,buffer.length))!=-1){ String s=new String(buffer,c); System.out.println(s); osw.write(buffer,c); osw.flush(); } isr.close(); osw.close(); } }
5.FileReader/FileWriter(這種方式bu)
package com.wxd.test2; import java.io.FileReader; import java.io.FileWriter; import java.io.IOException; public class FrAndFwDemo { public static void main(String[] args) throws IOException{ FileReader fr=new FileReader("demo\\test.txt"); FileWriter fw=new FileWriter("demo\\text2.txt",true);//設定為true在後面追加 char[] buffer=new char[2056]; int c; while ((c=fr.read(buffer,buffer.length))!=-1){ fw.write(buffer,c); fw.flush(); } fr.close(); fw.close(); } }
6.字元流的過濾器
BufferedReader ----->readLine一次讀一行
BufferedWriter/PrintWriter ---->寫一行
package com.wxd.test2; import java.io.*; public class BrAndBwOrPwDemo { public static void main(String[] args) throws IOException { //對檔案進行讀寫操作 BufferedReader br = new BufferedReader(new InputStreamReader(new FileInputStream("demo\\test.txt"))); /*BufferedWriter bw=new BufferedWriter(new OutputStreamWriter(new FileOutputStream("demo\\test3.txt")));*/ PrintWriter pw = new PrintWriter("demo\\test3.txt"); String line; while ((line = br.readLine()) != null) { System.out.println(line);//一次讀一行,並不能識別換行 /*bw.write(line); //單獨寫出換行操作 bw.newLine(); bw.flush();*/ pw.println(line); pw.flush(); } br.close(); // bw.close(); pw.close(); } }
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支援我們。