2. 程式人生 > 其它 >Connection attempt to a database may return SQL0902C error with reason code "200x1232"("0100")""

Connection attempt to a database may return SQL0902C error with reason code "200x1232"("0100")""

阿新 • • 發佈：2022-12-07
Skip to content     Support     DownloadsDocumentationForumsCasesMonitoringManage support account     IBM Support

Connection attempt to a database may return SQL0902C error with reason code "200x1232"("0100")""

https://www.ibm.com/support/pages/connection-attempt-database-may-return-sql0902c-error-reason-code-200x12320100

Troubleshooting


Problem

When you are trying to connect to a database or restore a database from a backup, you may receive SQL0902C error from the DB2 command line as below examples: $ db2 restore database TESTDB taken at 20140906100839 SQL0902C A system error occurred. Subsequent SQL statements cannot be processed. IBM software support reason code: "200x1232"("0100")"". or $db2 connect to TESTDB SQL0902C A system error (reason code = "200x1232"("0100")"") occurred. Subsequent SQL statements cannot be processed. SQLSTATE=58005

Symptom

The error normally occurs after previous failed/incomplete redirect restores. In addition to the SQL0902C error, you may also see below db2diag.log errors reported by the db2bp process:

2014-09-06-19.54.54.052569-240 I211440A450 LEVEL: Error
PID : 14155940 TID : 1 PROC : db2bp
INSTANCE: db2inst3 NODE : 000
HOSTNAME: MYHOST1
EDUID : 1
FUNCTION: DB2 UDB, DRDA Application Requester, sqljrDrdaArAuthenticate, probe:912
MESSAGE : ZRC=0x87370014=-2026438636=SQLJR_SYSI "System Internal"
DIA8515C A system error has occurred.
DATA #1 : String, 20 bytes
DRDA AR CB IS NULL.

2014-09-06-19.54.54.076387-240 E211891A395 LEVEL: Severe
PID : 14155940 TID : 1 PROC : db2bp
INSTANCE: db2inst3 NODE : 000
HOSTNAME: MYHOST1
EDUID : 1
FUNCTION: DB2 UDB, DRDA Application Requester, sqljrDrdaArAuthenticate, probe:912
MESSAGE : ADM2503C A datastream parsing error has been detected. A dump has
been generated.

2014-09-06-19.54.54.118112-240 I212287A842 LEVEL: Severe
PID : 14155940 TID : 1 PROC : db2bp
INSTANCE: db2inst3 NODE : 000
HOSTNAME: MYHOST1
EDUID : 1
FUNCTION: DB2 UDB, DRDA Application Requester, sqljrDrdaArAuthenticate, probe:912
MESSAGE : ZRC=0x87370014=-2026438636=SQLJR_SYSI "System Internal"
DIA8515C A system error has occurred.
DATA #1 : SQLCA, PD_DB2_TYPE_SQLCA, 136 bytes
sqlcaid : SQLCA sqlcabc: 136 sqlcode: -902 sqlerrml: 19
sqlerrmc: 200x1232"("0100")"
sqlerrp : sqljrsec
sqlerrd : (1) 0x87370014 (2) 0x00000014 (3) 0x00000000
(4) 0x00000000 (5) 0x00000000 (6) 0x00000000
sqlwarn : (1) (2) (3) (4) (5) (6)
(7) (8) (9) (10) (11)
sqlstate:

Cause

The db2 backend process db2bp may still hold some stalled/corrupted internal memory structure in cache after a failed/incomplete redirect restore

Resolving The Problem

1) run "db2 terminate" command to terminate the db2bp process so that clean up the stalled/corrupted memory cache.

2) Alternatively, find out the db2bp process and kill it.

 

Was this topic helpful?

Document Information

More support for:
Db2 for Linux, UNIX and Windows

Software version:
10.1, 10.5, 9.5, 9.7

Operating system(s):
AIX, HP-UX, Linux, Solaris, Windows

Document number:
249953

Modified date:
16 June 2018

  Manage My Notification Subscriptions

Close

Need support?

  Contact IBMPrivacyTerms of useAccessibilityCookie Preferences      

------------------------------------------------------------------------------------------
如果你覺得文章有用，歡迎打賞

相關推薦

Connection attempt to a database may return SQL0902C error with reason code "200x1232"("0100")""

Skip to content     Support     DownloadsDocumentationForumsCasesMonitoringManage support account     IBM Support

關於C#呼叫XLua的函式丟擲attempt to call a nil value (global 'print')

網上有很多解決異常：attempt to call a nil value (global ‘print‘)的方法，但是我發現都是錯誤的。因為我試了好幾個，然後最後才發現都是錯誤的。

Error: attempt to setup a Window for datatype VARCHAR 和 Hive Runtime Error while processing row (tag=0) {"key":{"_col0":"b","_col1":"2"},"value&

環境： 這個問題在我使用CDH搭建的叢集上遇到的，主要是建表的時候統一用的VARCHAR型別，不要問為什麼，我也不太清楚，總之生產上就是這麼做的就是了。然後**執行聚合函式的視窗函式**的時候報的這個錯誤。之前也有過

Non-CDB Oracle Database To a PDB on a CDB（19C）

一、前提： 1.源庫和目標庫執行的主機版本一致。 Red Hat Enterprise Linux Server release 7.8 (Maipo)

uniapp swiper 滑動報錯：Ignored attempt to cancel a touchmove event with cancelable=false

技術標籤：vueuni-app uniapp swiper 滑動報錯 報錯內容 Ignored attempt to cancel a touchmove event with cancelable=false, for example because scrolling is in progress and cannot be interrupted.

redirect-windows-cmd-stdout-and-stderr-to-a-single-file

https://stackoverflow.com/questions/1420965/redirect-windows-cmd-stdout-and-stderr-to-a-single-file You want:

flyway maven plugin無法正常使用： Unable to connect to the database. Configure the url, user and password!

在pom.xml依賴中新增configuration內容，如下： <plugin> <groupId>org.flywaydb</groupId>

Resetting Entity Framework Migrations to a clean Slate

Not sure if this is a common occurrence, but I\'ve had a number of occasions where Entity Framework migrations have left the state of migrations in an unusable state. Usually this happens after a larg

關於Eclipse中匯入Java專案總是報錯“XXX cannot be resolved to a type“比如”String cannot be resolved to a type“的解決方案

在Eclipse中匯入Java專案總是報錯"XXX cannot be resolved to a type"比如”String cannot be resolved to a type"，匯入包也無法解決問題，如下圖後來通過查詢各種資料才知道是匯入的專案的

執行nvue 頁面報錯reportJSException >>>> exception function:GraphicActionAddElement, exception:You are trying to add a u-text to a u-text, which is illegal as u-text is not a container

執行nvue 頁面報錯reportJSException >>>> exception function:GraphicActionAddElement, exception:You are trying to add a u-text to a u-text, which is illegal as u-text is not a container

解決keras.backend.reshape中的錯誤ValueError: Tried to convert 'shape' to a tensor and failed. Error: Cannot convert a partially known TensorShape to a Tensor

許多CNN網路都有Fusion layer作為融合層，比如： 參考：https://arxiv.org/pdf/1712.03400.pdf

IndexError: invalid index of a 0-dim tensor. Use tensor.item() to convert a 0-dim tensor to a Python

技術標籤：經典目標檢測演算法執行錯誤ssd IndexError: invalid index of a 0-dim tensor. Use tensor.item() to convert a 0-dim tensor to a Pythontrain_loss += loss.data[0] 是pytorch0.3.1版本程式碼 解決

記錄一次空指標異常的解決(java.lang.NullPointerException:Attempt to invoke virtual method)

技術標籤：android java.lang.NullPointerException:Attempt to invoke virtual method ’ xxxxxx’ on a null object reference根據AS的提示定位到student.getName()方法上 先嚐試使用Log.e()輸出student物件 控

java.sql.SQLRecoverableException: IO 錯誤: Invalid connection string format, a valid format is: “host:

java.sql.SQLRecoverableException: IO 錯誤: Invalid connection string format, a valid format is: \"host:port:sid\"   

invalid index of a 0-dim tensor, Use tensor.item() to convert a 0-dim tensor to a number 報錯

技術標籤：程式碼python 轉載：https://blog.csdn.net/weixin_41797117/article/details/80237179 將pytorch更新到0.4.0最新版後對0.3.1版本程式碼會有如下警告，它在提醒使用者下個版本這將成為一個錯誤 修改方

flume讀取kafka訊息並存儲到HDFS上出現異常Attempt to heart beat failed since member id is not valid, reset it and t

技術標籤：大資料kafkaflumekafka大資料flumehadoop flume讀取kafka訊息並存儲到HDFS上出現異常Attempt to heart beat failed since member id is not valid, reset it and try to re-jo

fastnlp無法使用spacy，報錯[E050] Can't find model 'en'. It doesn't seem to be a shortcut link, a Python package or a valid path to a data directory.

fastnlp無法使用spacy，報錯[E050] Can\'t find model \'en\'. It doesn\'t seem to be a shortcut link, a Python package or a valid path to a data directory.

java.lang.NullPointerException: Attempt to invoke virtual method ‘void android.widget.RadioGroup.set

技術標籤：android 報錯log E/AndroidRuntime: FATAL EXCEPTION: main Process: com.hgfenis.radiogroupdemo01, PID: 7180

我無法在列表中新增元素？ UnsupportedOperationException異常(I am unable to add an element to a list? UnsupportedOperationException)

轉自：https://www.it1352.com/968919.html This one list object is biting me in the butt.. Any time I try to add an element to it, it produces this:

關於.Net Core生成JSON時錯誤：A possible object cycle was detected which is not supported. This can either be due to a cycle or if the object depth is larger than the maximum allowed depth of 32.

此筆記記載了本人在.Net Core 5.0環境下生成Json資料時A possible object cycle was detected which is not supported. This can either be due to a cycle or if the object depth is larger than the maximum al