CentOS7管理系統服務命令systemd
首先系統啟動流程:
POST --> Boot Sequeue(BIOS) --> Bootloader(MBR) --> Kernel(ramdisk) --> rootfs --> /sbin/init
init:
CentOS 5: SysV init
CentOS 6:Upstart
CentOS 7:Systemd
Systemd的新特性:
系統引導時實現服務並行啟動;
按需激活進程;
系統狀態快照;
基於依賴關系定義服務控制邏輯
核心概念:unit
unit由其相關配置文件進行標識、識別和配置;文件中主要包含了系統服務、監聽的socket、保存的快照以及其它與init相關的信息; 這些配置文件主要保存在:
/usr/lib/systemd/system
/run/systemd/system
/etc/systemd/system
unit的常見類型:
Service unit:文件擴展名為.service,用於定義系統服務;
Target unit:文件擴展為.target,用於模擬實現“運行級別”;
Device unit: .device,用於定義內核識別的設備;
Mount unit: .mount,定義文件系統掛載點;
Socket unit: .socket,用於標識進程間通信用到的socket文件;
Snapshot unit: .snapshot, 管理系統快照;
Automount unit: .automount,文件系統自動點設備;
Path unit: .path, 用於定義文件系統中的一文件或目錄;
關鍵特性:
基於socket的激活機制:socket與程序分離;
基於bus的激活機制;
基於device的激活機制;
基於Path的激活機制;
系統快照:保存各unit的當前狀態信息於持久存儲設備中;
向後兼容sysv init腳本;
/etc/init.d/
不兼容:
systemctl的命令是固定不變的;
非由systemd啟動的服務,systemctl無法與之通信;
3. 管理系統服務:
CentOS 7: service類型的unit文件;
syscemctl命令:
- Control the systemd system and service manager
systemctl [OPTIONS...] COMMAND [NAME...]
啟動: service NAME start ==> systemctl start NAME.service
停止: service NAME stop ==> systemctl stop NAME.service
重啟: service NAME restart ==> systemctl restart NAME.service
狀態: service NAME status ==> systemctl status NAME.service
條件式重啟:service NAME condrestart ==> systemctl try-restart NAME.service
重載或重啟服務: systemctl reload-or-restart NAME.servcie
重載或條件式重啟服務:systemctl reload-or-try-restart NAME.service
查看某服務當前激活與否的狀態: systemctl is-active NAME.service
查看所有已激活的服務:systemctl list-units --type service
查看所有服務(已激活及未激活): chkconfig --lsit ==> systemctl list-units -t service --all
設置服務開機自啟: chkconfig NAME on ==> systemctl enable NAME.service
禁止服務開機自啟: chkconfig NAME off ==> systemctl disable NAME.service
查看某服務是否能開機自啟: chkconfig --list NAME ==> systemctl is-enabled NAME.service
禁止某服務設定為開機自啟: systemctl mask NAME.service
取消此禁止: systemctl unmask NAME.servcie
查看服務的依賴關系:systemctl list-dependencies NAME.service
4. 管理target units:
運行級別:
0 ==> runlevel0.target, poweroff.target
1 ==> runlevel1.target, rescue.target
2 ==> runlevel2.tartet, multi-user.target
3 ==> runlevel3.tartet, multi-user.target
4 ==> runlevel4.tartet, multi-user.target
5 ==> runlevel5.target, graphical.target
6 ==> runlevel6.target, reboot.target
級別切換: init N ==> systemctl isolate NAME.target
查看級別: runlevel ==> systemctl list-units --type target
查看所有級別: systemctl list-units -t target -a
獲取默認運行級別:systemctl get-default
修改默認運行級別: systemctl set-default NAME.target
切換至緊急救援模式: systemctl rescue
切換至emergency模式: systemctl emergency
其它常用命令:
關機: systemctl halt, systemctl poweroff
重啟: systemctl reboot
掛起: systemctl suspend
快照: systemctl hibernate
快照並掛起: systemctl hybrid-sleep
5. service unit file:
文件通常由三部分組成:
[Unit]:定義與Unit類型無關的通用選項;用於提供unit的描述信息、unit行為及依賴關系等;
[Service]:與特定類型相關的專用選項;此處為Service類型;
[Install]:定義由“systemctl enable”以及"systemctl disable“命令在實現服務啟用或禁用時用到的一些選項;
Unit段的常用選項:
Description:描述信息; 意義性描述;
After:定義unit的啟動次序;表示當前unit應該晚於哪些unit啟動;其功能與Before相反;
Requies:依賴到的其它units;強依賴,被依賴的units無法激活時,當前unit即無法激活;
Wants:依賴到的其它units;弱依賴;
Conflicts:定義units間的沖突關系;
Service段的常用選項:
Type:用於定義影響ExecStart及相關參數的功能的unit進程啟動類型;
類型:
simple:
forking:
oneshot:
dbus:
notify:
idle:
EnvironmentFile:環境配置文件;
ExecStart:指明啟動unit要運行命令或腳本; ExecStartPre, ExecStartPost
ExecStop:指明停止unit要運行的命令或腳本;
Restart:
Install段的常用選項:
Alias:
RequiredBy:被哪些units所依賴;
WantedBy:被哪些units所依賴;
註意:對於新創建的unit文件或,修改了的unit文件,要通知systemd重載此配置文件;
# systemctl daemon-reload
本文出自 “11290766” 博客,請務必保留此出處http://rylan.blog.51cto.com/11290766/1930471
CentOS7管理系統服務命令systemd