樹莓派Tensflow環境搭建
樹莓派:Raspberry 3代
內核:4.9.35-v7+
Docker安裝:
1:curl -s https://raw.githubusercontent.com/flyingtimes/image-recognition/master/one_step_install.sh|bash
2:sudo apt-get update
3: wget -qO- https://get.docker.com/ | sh
4:sudo bash imgdetect.sh demo1.jpg
如果想免sudo權限使用docker,可以修改下相關的文件:http://blog.csdn.net/baidu_36342103/article/details/69357438
樹莓派Tensflow環境搭建
相關推薦
樹莓派Tensflow環境搭建
ast nsf .net com git pbe href err ash 樹莓派:Raspberry 3代 內核:4.9.35-v7+ Docker安裝: 1:curl -s https://raw.githubusercontent.com/flyingtimes/im
樹莓派開發環境搭建
成功 mod 環境 work ssh連接 net eip 終端 devel http://shumeipai.nxez.com/2015/03/17/saks-diy-tutorials-gpio-development-environment.html 1.鏡像燒寫所用鏡
樹莓派3B+環境搭建
轉載: https://blog.csdn.net/zhangjun62/article/details/80517176 我的樹莓派3b+ 沒有買HDMI 屏,利用網線與電腦主機相連操縱樹莓派。如果買回來接上電,電源燈在閃,表明板子有問題,趕快換。
在樹莓派2B上搭建indigo ros 開發環境
第一次接觸ros,感覺無從下手,在學了了官網wiki20篇教程後對ros有了一個初步的瞭解。由於我所在的科研小組專案的需要,需要在raspberry pi 2B上搭建indigo ros的開發環境,在經過兩天的努力後終於搞定,在pi2上執行也十分流暢。 1、在https:/
Google工程師:教你用樹莓派+Arduino+TensorFlow搭建圖像識別小車
href ble ogl dds .com ybds xls ddx wpa 6o呢鄰譚yq禿究乜km著樟派http://masbjyxls.wikidot.com/od潘礁弊x3苯悅詡lb厴勻瘓http://rhzwsbjsfz.wikidot.com/yc崗誦新oq儷簇
在樹莓派3B上搭建LAMP
style 1-1 實現 err like n) you likely doc 一、安裝apache2 sudo apt-get install apache2 在電腦上輸入樹莓派的網址會有如下顯示 二、安裝Mysql sudo apt-get install my
樹莓派-FTP伺服器搭建與配置
1.安裝vsftpd sudo apt-get install vsftpd 2.啟用FTP服務 sudo service vsftpd start 3.編輯vsftpd的配置檔案,並自定義FTP位置 sudo nano /etc/vsftpd.conf 依照個人所需對以下選項進行定義,如需使用則
樹莓派 Nginx+php7搭建網站
1/6.安裝Nginx+php7 並且啟動 sudo apt-get update sudo apt-get install nginx sudo apt-get install php7.0-f
樹莓派用dnsmasq搭建區域網dns伺服器
本文基於系統raspbian-stretch。首先安裝:aptitude install -y dnsmasqdnsmasq的配置檔案是/etc/dnsmasq.conf。我們先備份dnsmasq.conf:cd /etc sudo mv dnsmasq.conf dnsma
樹莓派用transmission搭建bt下載機
最近在樹莓派上搭建Bt下載機,覺得 transmission不錯,自己的開發機也可以安裝transmission. Transmission 是個開源的小型BT下載客戶端,能用命令列,桌面GUI和Web對任務進行管理。 首先安裝Transmission 的後臺服務,apt
樹莓派3B的Qt交叉編譯環境搭建(1)
實驗室專案需要用Qt在樹莓派上開發一個使用者互動介面。雖然樹莓派的硬體配置隨版本更新不斷提升,但是還是無法滿足直接在樹莓派上進行Qt開發,所以首先要做的事情就是搭建交叉編譯環境。 參考了博文:http://www.linuxidc.com/Linux/2016-07/133462.htm 下
樹莓派開發筆記(二):qt開發環境搭建:樹莓派qt編譯和宿主機qt交叉編譯
樹莓派開發筆記(二):qt開發環境搭建:樹莓派qt編譯和宿主機qt交叉編譯前話 前面已經成功執行樹莓派,下面使用qt開發樹莓派產品。搭建樹莓派qt編譯環境(不推薦:開發編譯速度慢) 安裝樹莓派的桌面版本,可以直接配置qt環境,此種方法總是卡卡的,所
樹莓派3入手環境搭建(QT+OpenCV)
1.樹莓派3出來已經有一段時間了,作為學計算機的我當然也不能落伍,果斷也入手的一部。今天就和大家介紹一下樹莓派3入手環境搭建方面的一些個人經驗。 2. 今天主要和大家分享一下樹莓派環境下QT5環境和OpenCV環境的搭建。 注:因為樹莓派3自帶無線網絡卡所以這就很方便了,我
樹莓派3b 核心編譯環境搭建的問題解決
一、錯誤提示: arm-linux-gnueabihf-gcc: error while loading shared libraries: libstdc++.so.6: cannot open s
Qt5.4(later)樹莓派2 交叉編譯環境搭建
費了好大力氣,終於把Qt5的交叉環境搞定了,這裡記錄一下具體的實現過程。google出來的文章都是很老的移植方法,很多博文裡面 提供的下載連結均已失效。 1. 準備工具 * qt-everywhere-opensource-src-5.4.1.tar* 2015-0
樹莓派開發筆記(一) 開發環境搭建
開發環境搭建 開發環境搭建 硬體準備 系統燒錄 系統配置 基本配置 其他配置 安裝開發軟體 開發環境搭建 硬體準備 SD-Card 樹莓派
MQTT學習之 在樹莓派中搭建客戶端環境
1.下載原始碼 2.安裝 make sudo make install 3.把編譯生成的庫複製到/lib目錄下 位於build 目錄下 進入目錄 cd build/output 拷貝 cp libpaho-mqtt3*.*
在樹莓派上搭建視訊傳輸環境
最近參加實驗室一個比較大的專案,需要用到實時傳輸。於是筆者開始學習這方面的知識。在走了很多冤枉路之後筆者終於找到了一套不錯的方案,於是選擇貼出來和大家一起學習。 1.使用裝置以及網路連線方式 傳送端:樹莓派B+,192.168.191.3 接收端:W10聯
在Ubuntu環境下用QT5開發樹莓派的GPIO程式(使用wiringPi庫)之一 搭建環境
準備工作: 一個樹莓派,我使用的是B+,裝上最新的Raspbian映象,RASPBIAN JESSIE WITH PIXEL 4.4 https://www.raspberrypi.org/downloads/raspbian/ Ubuntu作業系統,虛擬機器也可以,我使
樹莓派2+OpenCV環境搭建
一,環境搭建 1、安裝所需的安裝工具和包: # sudo apt-get install build-essential cmake pkg-config build-essential 和 pkg-config可能都已經安裝。以防萬一,我們還是將它們