2. 程式人生 > >利用MegaCli工具，在線添加單硬盤做RAID0

利用MegaCli工具，在線添加單硬盤做RAID0

阿新 • • 發佈：2018-02-01
bst size dsta num list gic 外部 ada pset

1、MegaCLI工具的安裝 
# rpm -ivh MegaCli-8.07.14-1.noarch.rpm
# rpm -ql MegaCli
/opt/MegaRAID/MegaCli/MegaCli
/opt/MegaRAID/MegaCli/MegaCli64
/opt/MegaRAID/MegaCli/libstorelibir-2.so.14.07-0

2、查看設備的相關信息

# cd /opt/MegaRAID/MegaCli/
# ./MegaCli64  -PDList -aALL
[root@cloudstack-01 MegaCli]# ./MegaCli64 -PDList -aALL

Adapter #0

Enclosure Device ID: 32
Slot Number: 0
Drive‘s position: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: 1
Device Id: 0
WWN: 5000C50095C32BD4
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 558.911 GB [0x45dd2fb0 Sectors]
Non Coerced Size: 558.411 GB [0x45cd2fb0 Sectors]
Coerced Size: 558.375 GB [0x45cc0000 Sectors]
Sector Size:  512
Logical Sector Size:  512
Physical Sector Size:  512
Firmware state: Online, Spun Up
Device Firmware Level: ES66
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c50095c32bd5
SAS Address(1): 0x0
Connected Port Number: 2(path0) 
Inquiry Data: SEAGATE ST3600057SS     ES666SLAPH5J            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :44C (111.20 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 1
Drive‘s position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: 1
Device Id: 1
WWN: 5000C50095BC809C
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 558.911 GB [0x45dd2fb0 Sectors]
Non Coerced Size: 558.411 GB [0x45cd2fb0 Sectors]
Coerced Size: 558.375 GB [0x45cc0000 Sectors]
Sector Size:  512
Logical Sector Size:  512
Physical Sector Size:  512
Firmware state: Online, Spun Up
Device Firmware Level: ES66
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c50095bc809d
SAS Address(1): 0x0
Connected Port Number: 0(path0) 
Inquiry Data: SEAGATE ST3600057SS     ES666SLARKD5            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :45C (113.00 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 2
Drive‘s position: DiskGroup: 3, Span: 0, Arm: 0
Enclosure position: 1
Device Id: 2
WWN: 5000C50095B4537C
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 558.911 GB [0x45dd2fb0 Sectors]
Non Coerced Size: 558.411 GB [0x45cd2fb0 Sectors]
Coerced Size: 558.375 GB [0x45cc0000 Sectors]
Sector Size:  512
Logical Sector Size:  512
Physical Sector Size:  512
Firmware state: Online, Spun Up
Device Firmware Level: ES66
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c50095b4537d
SAS Address(1): 0x0
Connected Port Number: 4(path0) 
Inquiry Data: SEAGATE ST3600057SS     ES666SLARAG7            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :45C (113.00 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32 (附件設備ID)
Slot Number: 3  （插槽號）
Drive‘s position: DiskGroup: 2, Span: 0, Arm: 0
Enclosure position: 1
Device Id: 3
WWN: 5000C500958CE818   （磁盤的WWN號）
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 558.911 GB [0x45dd2fb0 Sectors]
Non Coerced Size: 558.411 GB [0x45cd2fb0 Sectors]
Coerced Size: 558.375 GB [0x45cc0000 Sectors]
Sector Size:  512
Logical Sector Size:  512
Physical Sector Size:  512
Firmware state: Online, Spun Up
Device Firmware Level: ES66
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c500958ce819
SAS Address(1): 0x0
Connected Port Number: 1(path0) 
Inquiry Data: SEAGATE ST3600057SS     ES666SLAQ3FV            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :45C (113.00 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 32
Slot Number: 4
Drive‘s position: DiskGroup: 1, Span: 0, Arm: 0
Enclosure position: 1
Device Id: 4
WWN: 5000C5008FA725C4
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 558.911 GB [0x45dd2fb0 Sectors]
Non Coerced Size: 558.411 GB [0x45cd2fb0 Sectors]
Coerced Size: 558.375 GB [0x45cc0000 Sectors]
Sector Size:  512
Logical Sector Size:  512
Physical Sector Size:  512
Firmware state: Online, Spun Up
Device Firmware Level: ES66
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c5008fa725c5
SAS Address(1): 0x0
Connected Port Number: 3(path0) 
Inquiry Data: SEAGATE ST3600057SS     ES666SLAP6YY            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :37C (98.60 F)
PI Eligibility:  No 
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Port-1 :
Port status: Active
Port‘s Linkspeed: 6.0Gb/s 
Drive has flagged a S.M.A.R.T alert : No

Exit Code: 0x00

3、添加新的磁盤

# ./MegaCli64 -CfgLdAdd -r0[32:5] WB Direct -a0
說明：
r0: raid0
[32:5]:32為Enclosure Device ID，5為Slot Number
WB Direct：磁盤Write back

4、添加一塊帶有殘余信息的磁盤

# ./MegaCli64 -cfgforeign -scan -a0
There are 1 foreign configuration(s) on controller 0.

Exit Code: 0x00
說明：由於是新插入的盤，而且是塊有數據的盤，所有提示有外部配置。
# ./MegaCli64 -cfgforeign -clear -a0
Foreign configuration 0 is cleared on controller 0.

Exit Code: 0x00
# ./MegaCli64 -cfgforeign -scan -a0
There is no foreign configuration on controller 0.

Exit Code: 0x00
說明：清除外部配置信息，清除後再次進行查看
# ./MegaCli64 -CfgLdAdd -r0[32:5] WB Direct -a0
Adapter 0: Created VD 1

Adapter 0: Configured the Adapter!!

Exit Code: 0x00

5、查看Firmware state

# ./MegaCli64 -PDList -aALL -Nolog|grep ‘^Firm‘
Firmware state: Online, Spun Up
Firmware state: Online, Spun Up
Firmware state: Online, Spun Up
Firmware state: Online, Spun Up
Firmware state: Online, Spun Up
這裏的Firmware state有可能會有類似於“Firmware state: JBOD”狀態的

6、關閉JBOD模式

# /opt/MegaRAID/MegaCli/MegaCli64 -AdpSetProp -EnableJBOD -0 -aALL

Adapter 0: Set JBOD to Disable success.

Exit Code: 0x00

7、檢查陣列的配置

# /opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -LALL -aAll | grep RAID
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0
RAID Level          : Primary-0, Secondary-0, RAID Level Qualifier-0
RAID Level          : Primary-0, Secondary-0, RAID Level Qualifier-0
RAID Level          : Primary-0, Secondary-0, RAID Level Qualifier-0

利用MegaCli工具，在線添加單硬盤做RAID0

相關推薦

利用MegaCli工具，在線添加單硬盤做RAID0

bst size dsta num list gic 外部 ada pset 1、MegaCLI工具的安裝 # rpm -ivh MegaCli-8.07.14-1.noarch.rpm # rpm -ql MegaCli /opt/MegaRAID/MegaCli/Meg

Linux添加新硬盤及分區，格式化，掛載

ima 命令 啟動 ads bash 分區 tab class comm 1、查看分區信息： [[email protected]/* */ /]# fdisk -l Disk /dev/vdb: 209.7 GB, 209715200000 bytes1

Linux添加新硬盤，fdisk新建分區

linux添加新硬盤 fdisk新建分區 fdisk新建分區：[[email protected]/* */ ~]# fdisk -l Disk /dev/sda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 c

給虛擬機添加新硬盤並分區，fdisk查看分區，分區，重新讀取分區表信息partprobe，格式化，掛載，查看分區掛載信息

strip lvm misc ces e2fs ice sdi ted emp 1.虛擬機關機斷電 2.添加硬盤 2.開機 3.fdisk -l查看剛才新添加的硬盤 [[email protected]/* */ ~]# fdisk -l 磁盤

Linux系統添加新硬盤，並分區設置啟動自動掛載，圖文教程！

自動掛載 令行 主機 mkf image 根目錄 分區 分享 教程 虛擬機添加硬盤的步驟就不多廢話了，主要列出添加硬盤後要進行設置的幾個詳細步驟： 1.查看磁盤信息：fdisk -ls 添加前如下圖所示： 添加後如下圖： 也可以用：ls /dev/sd*查看，如下圖：

linux虛擬機上添加虛擬硬盤並分區

硬盤 加載 作文件 拓展 多個 filesyste 完成 spa 空間 添加虛擬硬盤 指定磁盤空間 成功在虛擬機中添加了一塊20G的硬盤。在linux中這樣定義sda為第一塊硬盤，第二塊硬盤為sdb，以此類推。Sda1為第一塊硬盤的第一分區。 linux上的分

AIX 添加刪除硬盤

AIX 添加刪除硬盤添加硬盤方式一：關機添加硬盤，完成操作後，啟動AIX系統。用lspv查看。方式二：不關閉系統 1.#lspv hdisk0 000b1fbf47874c2c rootvg active 2.#cfgmgr 3.#lspv

aws 和ubuntu添加新硬盤方法

命令 新硬盤 mkdir mnt 查看 編輯 uuid one 可能 1.現在 aws 網站上創建一個硬盤，註意創建的Availability Zone必須和EC2 虛擬機在同一個區，因為一個AZ相當於一個數據中心，為了保證速度，不可能把硬盤和虛擬機放在不同的數據中心。 2

在centos7上就對新添加的硬盤進行分區掛載等操作 （實驗自用）

and known 是否 guid ima .com exit 一次 clas ??1.在虛擬機上添加一個新的硬盤 ??2. 為了讓在系統裏能夠顯示新添加的硬盤已知有兩種操作方法? ? ? ? ?1.重啟? ? ? ? 2.輸入 echo "- - -&quo

利用formdata對象上傳文件時，需要添加的參數

for alert string local art .ajax ror process 文件 function doUpload() { var formData = new FormData($( "#uploadForm" )[0]);

MyBaits基本操作，為什麽session.commit()可以引起事物提交？ResultMap結果映射，執行添加後返回自增列的值，多條件查詢，智能標簽，工具類

info log list image mit fault 類型 工具類 自增列 1.為什麽session.commit()可以引起事務的提交？ 首先打開commit()源碼，ctrl+H打開它的實現類DefaultSession，找到它的commit方法 ctrl+左鍵

esxi在線添加硬盤，系統沒有識別到怎麽辦（重啟除外）

系統沒識別到硬盤esxi在線添加虛擬磁盤，fdisk -l沒發現，一般情況下重啟服務器就可以。但是我服務器不能影響業務，為什麽新增磁盤或磁盤擴容後，Linux系統識別不到呢？因為連接存儲設備的SCSI總線需要重新掃描，才能識別到這些新的存儲設備。一、新增虛擬磁盤1、找到總線編號[root@mail ~]# g

利用pt-online-schema-change為千萬級別表在線添加索引

cal edi XA roo ads 統計表 spa ces 變化 添加索引ALTER TABLE `FUND_PAY_TRADE_RECORD` ADD INDEX `IDX_PAY_THIRD_ID` (`THIRD_ID`) USING BTREE ;統計表大

微信小程序之分享，動態添加分享數據

tle images nsh 動態 fail spa tro blog ppm 1、效果： 2、.js代碼： page({ /** * 用戶點擊分享按鈕或右上角分享 */ onShareAppMessage: function (res)

創建PDF模板，java添加內容、導出下載PDF

scaleto build isp tty 打開 xml文件 actor type 簡單 本文主要內容是：用java在pdf模板中加入數據，圖片。 廢話不多說，舉個非常簡單的例子： 首先創建word文檔,導出PDF。 用 軟件adobe acrobat打開，操作步驟如圖：

【代碼學習】角色添加權限的方法，先刪除，再添加。而不是用修改，這樣很方便。

方便 添加權限 public resource res bject void @override != @Overridepublic void addRoleResources(Resources[] resources, Long roleId) { Map<

服務器網站報錯：由於擴展配置問題無法提供您請求的頁面，請添加MIME映射，針對mp4，flv文件類型無法打開。

bsp 08-18 右擊 stream img 右上角 images es2017 com 服務器增加mp4格式的MIME 類型映射設置的具體步驟是： 　　右擊計算機》管理》服務和應用程序》Internet 信息服務（IIS）管理器》選擇你開發的IIS網站》點擊IIS選項下

windows遠程連接linux-安裝xfce界面，ubuntn添加新用戶

-m 一個 解決 sudoer chm window 依次 主機 == 參考：“ 使用xrdp實現windows 遠程桌面連接linux” http://blog.csdn.net/qq_33530388/article/details/64502902; http://w

C# 動態生成WebService，無需添加引用

color csharp import exception 客戶 pri [] return encoding C#項目調用WebService是很常見的現象，但一旦修改鏈接地址就需要重新更新引用很是麻煩，這裏跟大家分享一個通過地址，無需添加引用動態生成Webservice

iOS UILable 文字添加圖片 （文字前面，中間，後面添加圖）

str nbsp tab 添加 tac nsa end agen mut 1，實例化一個UILable 2, // 創建一個富文本 NSMutableAttributedString *attri = [[NSMutableAttributedString