本文主要講述使用fdisk工具對磁盤進行分區和格式化的方法

首先要明確分區是針對磁盤進行的操做，磁盤分區會創建分區表，類似vda，sda的是磁盤，vda1，sda1的是分區

1.1. 查看分區掛載情況

df -h

1.2.查看服務器掛載的磁盤

fdisk -l
fdisk -l /dev/vdb

2.1.對vdb磁盤進行分區

fdisk /dev/vdb

進入交互式的分區界面，以下是分區操作步驟

m打印菜單
n新建分區
    p選擇主分區
    e選擇擴展分區
        1選擇分區號
            選擇初始位置，默認為1
            選擇結束為止，默認為磁盤結尾
 

分區創建完成，可以列表查看，保存退出

p打印分區表
w寫入分區表保存
q退出

2.2.重新載入磁盤分區信息

無返回就是載入磁盤信息成功，針對磁盤進行操作

partprobe /dev/vdb

註意：
使用fdisk工具只是將分區信息寫到磁盤，
在格式化分區值前需要使用partprobe讓kernel重新讀取分區信息，如果不成功則需要重啟系統

3.1.對磁盤分區進行格式化

使用ext4文件系統

mkfs.ext4 /dev/vdb1

3.2.格式化完成後續優化配置，取消磁盤自檢

tune2fs -c -1 /dev/vdb1 

4.1.掛載磁盤分區到指定目錄

mkdir -p /data
mount
 
 /dev/vdb1 /data

4.2.配置開機自動掛載分區

/etc/fstab 增加一行

vim /etc/fstab 
-------------------------------------------------------
/dev/vdb1               /data                   ext4    defaults        0 0
-------------------------------------------------------

5.0.以下為實例演示：使用Ubuntu系統

5.1.查看磁盤分區信息

root@zstest:~# df -h
Filesystem      Size  Used Avail Use
 
% Mounted on
udev            7.9G     0  7.9G   0% /dev
tmpfs           1.6G  3.2M  1.6G   1% /run
/dev/vda1        50G  5.7G   41G  13% /
tmpfs           7.9G     0  7.9G   0% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs           7.9G     0  7.9G   0% /sys/fs/cgroup
tmpfs           1.6G     0  1.6G   0% /run/user/0

5.2.列表查看磁盤信息

root@zstest:~# fdisk -l
Disk /dev/vda: 50 GiB, 53687091200 bytes, 104857600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd6804155

Device     Boot Start       End   Sectors Size Id Type
/dev/vda1  *     2048 104855551 104853504  50G 83 Linux


Disk /dev/vdb: 50 GiB, 53687091200 bytes, 104857600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

5.3.對磁盤vdb進行分區

root@zstest:~# fdisk /dev/vdb

Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x63c3e6e0.

Command (m for help): n
Partition type
   p   primary (0 primary, 0 extended, 4 free)
   e   extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-104857599, default 2048): 
Last sector, +sectors or +size{K,M,G,T,P} (2048-104857599, default 104857599): 

Created a new partition 1 of type ‘Linux‘ and of size 50 GiB.

Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

5.4.查看分區信息

root@zstest:~# fdisk -l
Disk /dev/vda: 50 GiB, 53687091200 bytes, 104857600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd6804155

Device     Boot Start       End   Sectors Size Id Type
/dev/vda1  *     2048 104855551 104853504  50G 83 Linux


Disk /dev/vdb: 50 GiB, 53687091200 bytes, 104857600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x63c3e6e0

Device     Boot Start       End   Sectors Size Id Type
/dev/vdb1        2048 104857599 104855552  50G 83 Linux

5.5.重新載入磁盤分區信息

[root@zstest ~]# partprobe /dev/vdb

5.6.對指定磁盤分區進行格式化，使用ext4文件系統

root@zstest:~# mkfs.ext4 /dev/vdb1
mke2fs 1.42.13 (17-May-2015)
Creating filesystem with 13106944 4k blocks and 3276800 inodes
Filesystem UUID: 047fb8b0-e6ed-42db-bf5c-2a6d388fc34d
Superblock backups stored on blocks: 
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
        4096000, 7962624, 11239424

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done   
This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.

5.7.根據提示進行操作，取消磁盤自檢

root@zstest:~# tune2fs -c -1 /dev/vdb1 
tune2fs 1.42.13 (17-May-2015)
Setting maximal mount count to -1

5.8.掛載分區到指定目錄

mkdir -p /data
mount /dev/vdb1 /data

5.9.配置開機自動掛載分區

vim /etc/fstab 
-------------------------------------------------------
# made by tssc
/dev/vdb1               /data                   ext4    defaults        0 0
-------------------------------------------------------

完畢，呵呵呵呵

使用fdisk工具為磁盤分區格式化