hisi 配置靜態IP地址
阿新 • • 發佈:2018-11-05
靜態IP地址配置檔案路徑 /etc/network/interfaces
interfaces格式
#設定單個ipv4地址
The loopback interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.9.51
netmask 255.255.252.0
gateway 192.168.9.1
mtu 1500
#設定單個ipv6地址 #The loopback interface auto lo iface lo inet loopback auto eth0 iface eth0 inet6 static address 2001:f80:754::51 netmask 64 gateway 2001:f80:754::1 mtu 1500
#同時設定ipv4和ipv6地址
#The loopback interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet6 static
address 2001:f80:754::51
netmask 64
gateway 2001:f80:754::1
mtu 1500
iface eth0 inet static
address 192.168.9.58
netmask 255.255.252.0
gateway 192.168.9.1
mtu 1500
#設定多個ipv4地址 #The loopback interface auto lo iface lo inet loopback auto eth0 eth0:1 iface eth0 inet6 static address 2001:f80:754::51 netmask 64 gateway 2001:f80:754::1 mtu 1500 iface eth0 inet static address 192.168.9.58 netmask 255.255.252.0 gateway 192.168.9.1 mtu 1500 iface eth0:1 inet static address 192.168.9.59 netmask 255.255.252.0 gateway 192.168.9.1 mtu 1500
#注:有幾個地址就配置幾個介面。冒號後面的數字可以隨便寫的,只要幾個配置的名字不重複就可以。
但是要記住重啟網絡卡時ifup 對應的介面名字,比如ifup eth0:1
命令列新增IP地址
ifconfig eth0 add 2001:f80:754::4/64