ubuntu 16.04 LTS - TeamViewer 13 for Linux
ubuntu 16.04 LTS - TeamViewer 13 for Linux
System requirements
TeamViewer for Linux requiress a Linux 2.6.27 kernel and GLIBC 2.17. Qt 5.6 is recommended for the best experience.
For a transitional period, Qt 5.2 is still supported, allowing installation on Debian 8 and Ubuntu 14.04.
Machine requirements
x86 64 bit: amd64 (Intel 64/EM64T)
x86 32 bit: SSE2
armv7 32 bit: armv7 hardfloat (Raspberry Pi 2+)
Choose your package
For PC, pick the 64-bit (or 32-bit) package according to your system. If in doubt, run
. On a 64-bit system,
will print
.
For Raspberry Pi, pick the ARM package.
Previous versions
These downloads are only recommended for users with older licenses that may not be used with the latest release of TeamViewer.
See previous versions
Installing TeamViewer
Usually, you can install the package by double-clicking or right-clicking on it and select the package manager, e.g. Open with software installation, Open with GDebi package installer, Open with Ubuntu Software Center, or Open with QApt package installer.
If you prefer the command line, just run
# for DEB packages:
apt install ./teamviewer_13.x.yyy_[arch].deb
apt install ./teamviewer-host_13.x.yyy_[arch].deb
# for RPM packages (use dnf if yum is not available):
yum install ./teamviewer_13.x.yyy.[arch].rpm
yum install ./teamviewer-host_13.x.yyy.[arch].rpm
# for SUSE:
zypper install ./teamviewer-suse_13.x.yyy.[arch].rpm
zypper install ./teamviewer-host-suse_13.x.yyy.[arch].rpm
Note: teamviewer and teamviewer-host cannot be installed side by side. If you want to install teamviewer-host, teamviewer must be removed first. If you want to run teamviewer occasionaly, you can use the tar package and run it without installation.
[email protected]:~$ uname -m
strong
[email protected]:~$
[email protected]:~$ uname
Linux
[email protected]:~$
[email protected]:~$ ll teamviewer_13.1.8286_amd64.deb
-rwxrwxrwx 1 strong strong 12901984 6月 29 16:50 teamviewer_13.1.8286_amd64.deb*
[email protected]:~$
[email protected]:~$ apt install ./teamviewer_13.1.8286_amd64.deb
E: 無法開啟鎖檔案 /var/lib/dpkg/lock - open (13: 許可權不夠)
E: 無法對狀態列表目錄加鎖(/var/lib/dpkg/)，請檢視您是否正以 root 使用者執行？
[email protected]:~$
[email protected]:~$ sudo apt install ./teamviewer_13.1.8286_amd64.deb
[sudo] strong 的密碼：
正在讀取軟體包列表... 完成
正在分析軟體包的依賴關係樹
正在讀取狀態資訊... 完成
注意，選中 'teamviewer' 而非 './teamviewer_13.1.8286_amd64.deb'
將會同時安裝下列軟體：
libqt5x11extras5 qml-module-qtquick-controls qml-module-qtquick-dialogs qml-module-qtquick-privatewidgets qtdeclarative5-controls-plugin
qtdeclarative5-dialogs-plugin
下列【新】軟體包將被安裝：
libqt5x11extras5 qml-module-qtquick-controls qml-module-qtquick-dialogs qml-module-qtquick-privatewidgets qtdeclarative5-controls-plugin
qtdeclarative5-dialogs-plugin teamviewer
升級了 0 個軟體包，新安裝了 7 個軟體包，要解除安裝 0 個軟體包，有 16 個軟體包未被升級。
需要下載 787 kB/13.7 MB 的歸檔。
解壓縮後會消耗 66.4 MB 的額外空間。
您希望繼續執行嗎？ [Y/n] Y
獲取:1 /home/strong/teamviewer_13.1.8286_amd64.deb teamviewer amd64 13.1.8286 [12.9 MB]
獲取:2 http://mirrors.tuna.tsinghua.edu.cn/ubuntu xenial/main amd64 qml-module-qtquick-controls amd64 5.5.1-1ubuntu1 [643 kB]
獲取:3 http://mirrors.tuna.tsinghua.edu.cn/ubuntu xenial/universe amd64 libqt5x11extras5 amd64 5.5.1-3build1 [7,876 B]
獲取:4 http://mirrors.tuna.tsinghua.edu.cn/ubuntu xenial/main amd64 qml-module-qtquick-privatewidgets amd64 5.5.1-1ubuntu1 [38.9 kB]
獲取:5 http://mirrors.tuna.tsinghua.edu.cn/ubuntu xenial/main amd64 qml-module-qtquick-dialogs amd64 5.5.1-1ubuntu1 [89.0 kB]
獲取:6 http://mirrors.tuna.tsinghua.edu.cn/ubuntu xenial/universe amd64 qtdeclarative5-controls-plugin all 5.5.1-1ubuntu1 [4,032 B]
獲取:7 http://mirrors.tuna.tsinghua.edu.cn/ubuntu xenial/universe amd64 qtdeclarative5-dialogs-plugin amd64 5.5.1-1ubuntu1 [4,044 B]
已下載 787 kB，耗時 1秒 (541 kB/s)
正在選中未選擇的軟體包 qml-module-qtquick-controls:amd64。
(正在讀取資料庫 ... 系統當前共安裝有 181519 個檔案和目錄。)
正準備解包 .../qml-module-qtquick-controls_5.5.1-1ubuntu1_amd64.deb ...
正在解包 qml-module-qtquick-controls:amd64 (5.5.1-1ubuntu1) ...
正在選中未選擇的軟體包 libqt5x11extras5:amd64。
正準備解包 .../libqt5x11extras5_5.5.1-3build1_amd64.deb ...
正在解包 libqt5x11extras5:amd64 (5.5.1-3build1) ...
正在選中未選擇的軟體包 qml-module-qtquick-privatewidgets:amd64。
正準備解包 .../qml-module-qtquick-privatewidgets_5.5.1-1ubuntu1_amd64.deb ...
正在解包 qml-module-qtquick-privatewidgets:amd64 (5.5.1-1ubuntu1) ...
正在選中未選擇的軟體包 qml-module-qtquick-dialogs:amd64。
正準備解包 .../qml-module-qtquick-dialogs_5.5.1-1ubuntu1_amd64.deb ...
正在解包 qml-module-qtquick-dialogs:amd64 (5.5.1-1ubuntu1) ...
正在選中未選擇的軟體包 qtdeclarative5-controls-plugin。
正準備解包 .../qtdeclarative5-controls-plugin_5.5.1-1ubuntu1_all.deb ...
正在解包 qtdeclarative5-controls-plugin (5.5.1-1ubuntu1) ...
正在選中未選擇的軟體包 qtdeclarative5-dialogs-plugin:amd64。
正準備解包 .../qtdeclarative5-dialogs-plugin_5.5.1-1ubuntu1_amd64.deb ...
正在解包 qtdeclarative5-dialogs-plugin:amd64 (5.5.1-1ubuntu1) ...
正在選中未選擇的軟體包 teamviewer。
正準備解包 .../teamviewer_13.1.8286_amd64.deb ...
正在解包 teamviewer (13.1.8286) ...
正在處理用於 libc-bin (2.23-0ubuntu10) 的觸發器 ...
正在處理用於 desktop-file-utils (0.22-1ubuntu5.2) 的觸發器 ...
正在處理用於 bamfdaemon (0.5.3~bzr0+16.04.20180209-0ubuntu1) 的觸發器 ...
Rebuilding /usr/share/applications/bamf-2.index...
正在處理用於 gnome-menus (3.13.3-6ubuntu3.1) 的觸發器 ...
正在處理用於 mime-support (3.59ubuntu1) 的觸發器 ...
正在處理用於 hicolor-icon-theme (0.15-0ubuntu1.1) 的觸發器 ...
正在設定 qml-module-qtquick-controls:amd64 (5.5.1-1ubuntu1) ...
正在設定 libqt5x11extras5:amd64 (5.5.1-3build1) ...
正在設定 qml-module-qtquick-privatewidgets:amd64 (5.5.1-1ubuntu1) ...
正在設定 qml-module-qtquick-dialogs:amd64 (5.5.1-1ubuntu1) ...
正在設定 qtdeclarative5-controls-plugin (5.5.1-1ubuntu1) ...
正在設定 qtdeclarative5-dialogs-plugin:amd64 (5.5.1-1ubuntu1) ...
正在設定 teamviewer (13.1.8286) ...
正在處理用於 libc-bin (2.23-0ubuntu10) 的觸發器 ...
[email protected]:~$
[email protected]:~$ teamviewer
Init...
CheckCPU: SSE2 support: yes
Checking setup...
Launching TeamViewer ...
Launching TeamViewer GUI ...
Accept License Agreement
Start Team Viewer with system
