• struts2預設的常量配置

　　以我這邊的struts2-core-2.3.36為例

 　　文末我會來copy一份default.properties檔案

• 修改struts2的預設常量配置

　　　　修改預設常量配置大體有三個辦法：

1. 1. 　　方法1：在src目錄新增struts.xml檔案（最常用的也是這個辦法）

       

   2. 　　方法2：在src目錄下新增struts.properties檔案配置的話，其實就可以借鑑default.properties檔案

       

   3. 　　方法3： 在專案的web.xml增加配置，如下程式碼：

        <!--
       
       配置常量   -->
        <context-param>
            <param-name>struts.i18n.encoding</param-name>
            <param-value>UTF-8</param-value>
        </context-param>

       

• 載入配置檔案的預設順序

1.default.properties檔案 作用:定義了struts2框架中所有常量 位置: 在struts的core核心jar裡面
2.struts-default.xml    作用:配置了bean,interceptor,result等。 位置:在struts的core核心jar包裡面
  struts-plugin.xml     它是struts2框架中所使用的外掛的配置檔案。 
  struts.xml            自定義的struts.xml檔案
3.struts.properties 
  src下面自定義的struts.properties 
4.web.xml
 

預設的載入順序從1-4，所以我們可以得到寫在web.xml的配置會最終生效。

•  這個模組是struts的常量的配置檔案default.properties的檔案的拷貝

#
# $Id$
#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#  http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#
### START SNIPPET: complete_file

### Struts default properties
###(can be overridden by a struts.properties file in the root of the classpath)
###

### This can be used to set your default locale and encoding scheme
# struts.locale=en_US
struts.i18n.encoding=UTF-8

### if specified, the default object factory can be overridden here
### Note: short-hand notation is supported in some cases, such as "spring"
###       Alternatively, you can provide a com.opensymphony.xwork2.ObjectFactory subclass name here
# struts.objectFactory = spring

### specifies the autoWiring logic when using the SpringObjectFactory.
### valid values are: name, type, auto, and constructor (name is the default)
struts.objectFactory.spring.autoWire = name

### indicates to the struts-spring integration if Class instances should be cached
### this should, until a future Spring release makes it possible, be left as true
### unless you know exactly what you are doing!
### valid values are: true, false (true is the default)
struts.objectFactory.spring.useClassCache = true

### ensures the autowire strategy is always respected.
### valid values are: true, false (false is the default)
struts.objectFactory.spring.autoWire.alwaysRespect = false

### By default SpringObjectFactory doesn't support AOP
### This flag was added just temporally to check if nothing is broken
### See https://issues.apache.org/jira/browse/WW-4110
struts.objectFactory.spring.enableAopSupport = false

### if specified, the default object type determiner can be overridden here
### Note: short-hand notation is supported in some cases, such as "tiger" or "notiger"
###       Alternatively, you can provide a com.opensymphony.xwork2.util.ObjectTypeDeterminer implementation name here
### Note: By default, com.opensymphony.xwork2.util.DefaultObjectTypeDeterminer is used which handles type detection
###       using generics. com.opensymphony.xwork2.util.GenericsObjectTypeDeterminer was deprecated since XWork 2, it's
###       functions are integrated in DefaultObjectTypeDeterminer now.
###       To disable tiger support use the "notiger" property value here.
#struts.objectTypeDeterminer = tiger
#struts.objectTypeDeterminer = notiger

### Parser to handle HTTP POST requests, encoded using the MIME-type multipart/form-data
# struts.multipart.parser=cos
# struts.multipart.parser=pell
# struts.multipart.parser=jakarta-stream
struts.multipart.parser=jakarta
# uses javax.servlet.context.tempdir by default
struts.multipart.saveDir=
struts.multipart.maxSize=2097152

### Load custom property files (does not override struts.properties!)
# struts.custom.properties=application,org/apache/struts2/extension/custom

### How request URLs are mapped to and from actions
#struts.mapper.class=org.apache.struts2.dispatcher.mapper.DefaultActionMapper

### Used by the DefaultActionMapper
### You may provide a comma separated list, e.g. struts.action.extension=action,jnlp,do
### The blank extension allows you to match directory listings as well as pure action names
### without interfering with static resources, which can be specified as an empty string
### prior to a comma e.g. struts.action.extension=, or struts.action.extension=x,y,z,,
struts.action.extension=action,,

### Used by FilterDispatcher
### If true then Struts serves static content from inside its jar.
### If false then the static content must be available at 
 
<context_path>/struts
struts.serve.static=true

### Used by FilterDispatcher
### This is good for development where one wants changes to the static content be
### fetch on each request.
### NOTE: This will only have effect if struts.serve.static=true
### If true -> Struts will write out header for static contents such that they will
###             be cached by web browsers (using Date, Cache-Content, Pragma, Expires)
###             headers).
### If false -> Struts will write out header for static contents such that they are
###            NOT to be cached by web browser (using Cache-Content, Pragma, Expires
###            headers)
struts.serve.static.browserCache=true

### Set this to false if you wish to disable implicit dynamic method invocation
### via the URL request. This includes URLs like foo!bar.action, as well as params
### like method:bar (but not action:foo).
### An alternative to implicit dynamic method invocation is to use wildcard
### mappings, such as <action name="*/*" method="{2}" class="actions.{1}">
struts.enable.DynamicMethodInvocation = false

### Set this to true if you wish to allow slashes in your action names.  If false,
### Actions names cannot have slashes, and will be accessible via any directory
### prefix.  This is the traditional behavior expected of WebWork applications.
### Setting to true is useful when you want to use wildcards and store values
### in the URL, to be extracted by wildcard patterns, such as
### <action name="*/*" method="{2}" class="actions.{1}"> to match "/foo/edit" or
### "/foo/save".
struts.enable.SlashesInActionNames = false

### Disables support for action: prefix
struts.mapper.action.prefix.enabled = false

### Blocks access to actions in other namespace than current with action: prefix
struts.mapper.action.prefix.crossNamespaces = false

### use alternative syntax that requires %{} in most places
### to evaluate expressions for String attributes for tags
struts.tag.altSyntax=true

### when set to true, Struts will act much more friendly for developers. This
### includes:
### - struts.i18n.reload = true
### - struts.configuration.xml.reload = true
### - raising various debug or ignorable problems to errors
###   For example: normally a request to foo.action?someUnknownField=true should
###                be ignored (given that any value can come from the web and it
###                should not be trusted). However, during development, it may be
###                useful to know when these errors are happening and be told of
###                them right away.
struts.devMode = false

### when set to true, resource bundles will be reloaded on _every_ request.
### this is good during development, but should never be used in production
### struts.i18n.reload=false

### Standard UI theme
### Change this to reflect which path should be used for JSP control tag templates by default
struts.ui.theme=xhtml
struts.ui.templateDir=template
### Change this to use a different token to indicate template theme expansion
struts.ui.theme.expansion.token=~~~
#sets the default template type. Either ftl, vm, or jsp
struts.ui.templateSuffix=ftl

### Configuration reloading
### This will cause the configuration to reload struts.xml when it is changed
### struts.configuration.xml.reload=false

### Location of velocity.properties file.  defaults to velocity.properties
struts.velocity.configfile = velocity.properties

### Comma separated list of VelocityContext classnames to chain to the StrutsVelocityContext
struts.velocity.contexts =

### Location of the velocity toolbox
struts.velocity.toolboxlocation=

### used to build URLs, such as the UrlTag
struts.url.http.port = 80
struts.url.https.port = 443
### possible values are: none, get or all
struts.url.includeParams = none

### Load custom default resource bundles
# struts.custom.i18n.resources=testmessages,testmessages2

### workaround for some app servers that don't handle HttpServletRequest.getParameterMap()
### often used for WebLogic, Orion, and OC4J
struts.dispatcher.parametersWorkaround = false

### configure the Freemarker Manager class to be used
### Allows user to plug-in customised Freemarker Manager if necessary
### MUST extends off org.apache.struts2.views.freemarker.FreemarkerManager
#struts.freemarker.manager.classname=org.apache.struts2.views.freemarker.FreemarkerManager

### Enables caching of FreeMarker templates
### Has the same effect as copying the templates under WEB_APP/templates
### struts.freemarker.templatesCache=false

### Enables caching of models on the BeanWrapper
struts.freemarker.beanwrapperCache=false

### See the StrutsBeanWrapper javadocs for more information
struts.freemarker.wrapper.altMap=true

### maxStrongSize for MruCacheStorage for freemarker, when set to 0 SoftCacheStorage which performs better in heavy loaded application
### check WW-3766 for more details
struts.freemarker.mru.max.strong.size=0

### configure the XSLTResult class to use stylesheet caching.
### Set to true for developers and false for production.
struts.xslt.nocache=false

### Whether to always select the namespace to be everything before the last slash or not
struts.mapper.alwaysSelectFullNamespace=false

### Whether to allow static method access in OGNL expressions or not
struts.ognl.allowStaticMethodAccess=false

### Whether to throw a RuntimeException when a property is not found
### in an expression, or when the expression evaluation fails
struts.el.throwExceptionOnFailure=false

### Logs as Warnings properties that are not found (very verbose)
struts.ognl.logMissingProperties=false

### Caches parsed OGNL expressions, but can lead to memory leaks
### if the application generates a lot of different expressions
struts.ognl.enableExpressionCache=true

### Indicates if Dispatcher should handle unexpected exceptions by calling sendError()
### or simply rethrow it as a ServletException to allow future processing by other frameworks like Spring Security
struts.handle.exception=true
### END SNIPPET: complete_file