Day054--MySQL, 建立使用者和授權, 資料型別, 列舉和集合, 約束,唯一, 主鍵,外來鍵
建立使用者和授權
1.建立使用者: # 指定ip:192.118.1.1的mjj使用者登入 create user 'mjj'@'192.118.1.1' identified by '123'; # 指定ip:192.118.1.開頭的mjj使用者登入 create user 'mjj'@'192.118.1.%' identified by '123'; # 指定任何ip的mjj使用者登入 create user 'mjj'@'%' identified by '123'; 2.刪除使用者 drop user '使用者名稱'@'IP地址'; 3.修改使用者 rename user '使用者名稱'@'IP地址' to '新使用者名稱'@'IP地址'; 4.修改密碼 set password for '使用者名稱'@'IP地址'=Password('新密碼'); *****進入mysql庫, use mysql; 輸入 select * from user\G; 檢視所有使用者***** 對當前的使用者授權管理 檢視許可權 show grants for '使用者'@'IP地址'; #授權 mjj使用者僅對db1.t1檔案有查詢、插入和更新的操作 grant select ,insert,update on db1.t1 to "mjj"@'%'; # 表示有所有的許可權,除了grant這個命令,這個命令是root才有的。mjj使用者對db1下的t1檔案有任意操作 grant all privileges on db1.t1 to "mjj"@'%'; #mjj使用者對db1資料庫中的檔案執行任何操作 grant all privileges on db1.* to "mjj"@'%'; #mjj使用者對所有資料庫中檔案有任何操作 grant all privileges on *.* to "mjj"@'%'; 遠端連線: mysql -uskx -P3306 -h 192.168.15.113 -p123
複製表
#即複製表結構 又複製記錄
create table t2 select * from db1.t1;
# 只複製表結構,不復制記錄
create table t2 select * from db1.t1 where 1>3; #只要後面條件不成立,表示只複製表結構
create table t2 like db1.t1;
資料型別
整型 預設是有符號
資料型別 無符號(unsigned)和有符號 用0填充 zerofill
約束的作用: 保證資料的完整性和一致性
- tinyint [-128~127] 小整數
- int 整數
bigint 極大整數
create table t1(id int(4) unsigned,name char(20));
浮點型
- float 單精度 隨著小數位數的增多,不準確
- double 雙精度 隨著小數位數的增多.不準確,比float要準確
- decimal 小數 精準的小數
日期型別
year 年份 (1901~2155)
date 年月日
time 時分秒
datetime 年月日 時分秒 ***
now() sql語言中自帶的內容函: 獲取當前的時間(根據資料型別)
create table t10(born_year year,intClass datetime); 語法: YEAR YYYY(1901/2155) DATE YYYY-MM-DD(1000-01-01/9999-12-31) TIME HH:MM:SS('-838:59:59'/'838:59:59') DATETIME YYYY-MM-DD HH:MM:SS(1000-01-01 00:00:00/9999-12-31 23:59:59 Y) TIMESTAMP YYYYMMDD HHMMSS(1970-01-01 00:00:00/2037 年某時)
字元型別
- char 定長,簡單粗暴,浪費空間,存取速度快
- varchar 變長,精準,節省空間,存取速度慢
text 長文字
length():檢視位元組數
char_length():檢視字元數
列舉和集合
create table consumer(
id int,
name varchar(50),
sex enum('male','female','other') default 'male',
level enum('vip1','vip2','vip3','vip4'),#在指定範圍內,多選一
fav set('play','music','read','study') #在指定範圍內,多選多
);
注意:在sql中使用tinyint(1)來表示boolean型別
完整性約束
作用: 保證資料的完整性和一致性
not null 與 default
- 如果單獨設定not null 不能插入空值
- 如果即設定了not null,又指定default,可以插入空值,會走default
unique 唯一
單列唯一
create table t4(
id int not null,
name char(20) unique
);
create table t4(
id int not null,
name char(20),
unique(name)
);
insert into t4(id,name) values(1,'alex');
insert into t4(id,name) values(1,'wusir');
多列唯一
只要有一列相同,不能插入
create table t5(
id int,
name char(20),
unique(id),
unique(name)
);
聯合唯一 ***
多列相同時,不能插入
create table t6(
id int,
name char(20),
unique(id,name)
);
應用場景: 選課系統,一個學生可以選擇多個課程,一個課程可以被多個學生選擇,
student_id course_name
100 '生物'
101 '生物'
100 '化學
primary key
MySQL為什麼需要一個主鍵?
https://blog.csdn.net/shellching/article/details/77367557
化學反應: not null + unique
Mysql版本一個表中只能有一個主鍵,可以有聯合主鍵,但不能有多列主鍵
單列主鍵 不能為空 並且是唯一
# primary key 索引(針對於大量資料) 查詢速度要快
create table t7(
id int primary key,
name varchar(10) unique
);
create table t8(
id int not null unique,
name varchar(10) unique
);
複合主鍵
create table t9(
id int,
name varchar(10),
primary key(id,name)
);
auto_increment 自增量,升序排列,初始值為1,步長為1
create table student(
id int primary key auto_increment,
name varchar(20) not null,
sex enum('male','female') default 'male',
ip varchar(20) unique
);
insert into student(name,sex,ip) values ('alex','female','127.0.0.5'),('wusir','male','173.45.32.1');
auto_increment_increment 設定自增值, 也就是步長
auto_increment_offset 設定偏移值,也就是起始量
檢視可用的 開頭auto_inc的詞
mysql> show variables like 'auto_inc%';
+--------------------------+-------+
| Variable_name | Value |
+--------------------------+-------+
| auto_increment_increment | 1 |
| auto_increment_offset | 1 |
+--------------------------+-------+
rows in set (0.02 sec)
# 步長auto_increment_increment,預設為1
# 起始的偏移量auto_increment_offset, 預設是1
# 設定步長 為會話設定,只在本次連線中有效
set session auto_increment_increment=5;
#全域性設定步長 都有效。
set global auto_increment_increment=5;
# 設定起始偏移量
set global auto_increment_offset=3;
#強調:If the value of auto_increment_offset is greater than that of auto_increment_increment, the value of auto_increment_offset is ignored.
翻譯:如果auto_increment_offset的值大於auto_increment_increment的值,則auto_increment_offset的值會被忽略
# 設定完起始偏移量和步長之後,再次執行show variables like'auto_inc%';
發現跟之前一樣,必須先exit,再登入才有效。
mysql> show variables like'auto_inc%';
+--------------------------+-------+
| Variable_name | Value |
+--------------------------+-------+
| auto_increment_increment | 5 |
| auto_increment_offset | 3 |
+--------------------------+-------+
rows in set (0.00 sec)
#因為之前有一條記錄id=1
mysql> select * from student;
+----+---------+------+
| id | name | sex |
+----+---------+------+
| 1 | xiaobai | male |
+----+---------+------+
row in set (0.00 sec)
# 下次插入的時候,從起始位置3開始,每次插入記錄id+5
mysql> insert into student(name) values('ma1'),('ma2'),('ma3');
Query OK, 3 rows affected (0.00 sec)
Records: 3 Duplicates: 0 Warnings: 0
mysql> select * from student;
+----+---------+------+
| id | name | sex |
+----+---------+------+
| 1 | xiaobai | male |
| 3 | ma1 | male |
| 8 | ma2 | male |
| 13 | ma3 | male |
+----+---------+------+
auto_increment_increment和 auto_increment_offset
清空表區分delete和truncate的區別:
delete from t1; #如果有自增id,新增的資料,仍然是以刪除前的最後一樣作為起始。
truncate table t1;資料量大,刪除速度比上一條快,且直接從零開始。
foreign key ***
外來鍵
# 先建立主表
create table dep(
id int primary key auto_increment,
name char(10) unique,
dep_desc varchar(50) not null
);
# 校區表
create table school(
id int primary key auto_increment,
addr varchar not null
)
# 建立從表
create table emp(
eid int primary key auto_increment,
name char(10) not null,
age int not null,
dep_id int,
school_id int,
constraint fk_dep foreign key(dep_id) references dep(id)
on delete cascade
on update cascade,
constraint fk_school foreign key(school_id) references school(id)
on delete cascade
on update cascade
);
insert into dep(name,dep_desc) values('校長部','校長管理有限部門'),('公關部','公關管理有限部門'),('IT部門','IT技術有限部門'),('財務部','管錢很多部門');
insert into emp(name,age,dep_id)
values
('alex',18,1),
('wusir',30,2),
('吳老闆',20,3),
('馬老闆',18,4),
('邱老闆',20,2),
('女神',16,3);