service command not found
我在使用docker安裝nginx時,映象環境是centos,報如下錯誤:
nginx.sh service command not found
然後退出了映象生成過程,解決辦法:
進入容器內:
輸入
service 發現真的沒有
yum list | grep initscripts
會出現以下資訊
initscripts.x86_64
使用yum安裝一個
yum install initscripts -y
在輸入service 就ok啦
那麼需要dockerfile裡面加
RUN yum install initscripts -y
相關推薦
service command not found
我在使用docker安裝nginx時,映象環境是centos,報如下錯誤: nginx.sh service command not found 然後退出了映象生成過程,解決辦法: 進入容器內: 輸入 service 發現真的沒有 yum list | grep initscripts
centos沒有/sbin/service命令的恢復方法(-bash: service: command not found)
Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirrors.btte.net * extras: mirrors.tuna.tsinghua.edu.cn * updates: mirr
已解決:登入Linux後好多命令不能用,如使用service會報錯service command not found
su 或者 su root:的話只是將當前身份轉為root,使用者shell並沒有改變.所以有些系統命令不能使用. su -或者su -l或者su -l root,可以完全的將當前環境轉為root環境.如同root直接登陸. 其次,service的路徑為/sbin
bash:express:command not found
note nbsp 系統 fun 參考 fix 令行 模塊安裝 mrc 重新設置了node_global和node_cache目錄後,總是顯示command not found 找了幾篇博文後,終於解決了這個問題 步驟如下: 1、新建node_global和node_c
ssh執行遠程服務器腳本 提示php: command not found
環境變量 target sdn 執行命令 ech jpg ref 1.5 ssh root ssh執行遠程服務器腳本 提示php: command not found 設置環境變量 一臺機器作為管理機,來管理其他服務器,並通過key認證,免密碼登陸的
Linux不能使用FTP 命令 -bash: ftp: command not found
alt src found tp服務器 bsp mman ftp服務器 錯誤提示 不能 今天在centos上使用ftp命令連接搭建的FTP服務器(本機FTP服務使用Vsftpd搭建),出現如下的錯誤提示:-bash: ftp: command not found 查詢相關資
Linux下command not found(以CentOS下沒有telnet為例)
裏的 linu com ins net 文件 bsp netd mman [[email protected]/* */ ~]# telnet bash: telnet: command not found rpm -qa telnet* //查詢是否安裝了
shell下action:command not found
command 程序語言 action 開發 今天測試同事寫的一個shell腳本,執行的時候報錯,錯誤代碼為"action: command not found"檢查腳本發現“. /etc/init.d/functions”居然被註銷了, 取消註釋後,繼續執行腳本:報錯消失,問題得到解決。說明
<Linux> SSH配置之後 SHH slave1 測試 error:SSH: command not found
document command span 4.4 pre error -s 6.0 and 首先要查看一下ssh命令存在何處# which ssh /usr/bin/ssh 使用ssh的絕對路徑 # /usr/bin/ssh slave1Welcome to Ub
pip: command not found 一系列報錯
command not found distribute python pip #安裝python2.7版本tar xvf Python-2.7.9.tar.xzcd Python-2.7.9./configure --prefix=/usr/bin/python2.7makemake ins
mysqldump: command not found
完整 local 默認 完整路徑 執行命令 not found min mysq -s 原因:這是由於系統默認會查找/usr/bin下的命令,如果這個命令不在這個目錄下,當然會找不到命令,我們需要做的就是映射一個鏈接到/usr/bin目錄下,相當於建立一個鏈接文件。首先得知
【轉】bash: ssh: command not found解決方法(linux)
inux 配置 pan html clas client oop post bash 原文轉自:http://www.cnblogs.com/ahauzyy/archive/2013/04/25/3043699.html 今天在搭建hadoop的開發環境中,用的是ce
linux brctl command not found
man inux utils -- brctl idg 方法 not found bridge [[email protected]/* */ ~]# brctl-bash: brctl: command not found 解決方法: [[email
解決Centos 7不能聯網且輸入ifconfig出現command not found
centos 7 無法聯網 無法獲得ip地址 在VMware Workstation中,以最小化方式安裝Centos 7後,發現無法獲得IP地址進行上網,這是因為Centos 7默認網卡未被激活。此外,在sbin目錄中沒有ifconfig文件,這是因為Centos 7已經不使用ifconfig命令
解決Centos7不能聯網且ifconfig出現command not found
分配 mman eno ip add 默認 scrip star restart 網卡 在虛擬機中以最小化方式安裝centos7,後無法上網,因為centos7默認網卡未激活。 而且在sbin目錄中沒有ifconfig文件,這是因為centos7已經不使用 ifconfig
SecureCRT上傳bash: rz: command not found
ash ng- bit pos rec lena data -a popu 安裝lrzsz: # yum -y install lrzsz 現在就可以正常使用rz、sz命令上傳、下載數據了。 使用方法: 上傳文件 # rz filename 下載文件 #
Linux bash: scp: command not found的問題記錄
private ssl load round ase chan ram option cat 1,scp報錯[[email protected]/* */ soft]# scpjdk-7u55-linux-x64.tar.gz 192.168.121.246
-bash: git: command not found
-bash最近在測試openstack,沒想到剛敲倆行就報 -bash: git: command not found再看下配置vim /etc/profile-bash: vim: command not found一定是源選擇了最小化安裝的centos了yum install gitok本文出自 “bom
command not found 與 磁盤空間不足
系統管理 image 空間不足 imp design 我們 import 如果 安裝linux 問題:原正常運行的一服務無法運行,報錯command not found,日誌顯示disk no space; 排查信息:df -hl 根目錄所在磁盤空間已滿,使用命令在/n
ifconfig命令無法找到,提示bash: ifconfig: command not found
pat sso and not found then 找不到文件 打開 分享 註銷 問題就是題目那樣,具體解決方法截圖如下: 分析問題 1.whereis ifconfig 看一下這個命令在哪個目錄下 2.echo $PATH 看一下該目錄是否在路經下,註意lunux下是