u-boot 中增加自定義命令hjlcmd2------(新增檔案來定義)
1,在 "[email protected]:/home/hjl/Downloads/uboot/common#" 目錄中新增檔案 cmd_hjl.c ,加上標頭檔案
#include <common.h>
#include <command.h>
2,對應的命令名就是hjl 函式名就是do_hjl
3,在"[email protected]:/home/hjl/Downloads/uboot/common# vi Makefile" 新增
COBJS-y += cmd_hjl.o
4,"[email protected]:/home/hjl/Downloads/uboot# make distclean"
5, make distclean → make x210_sd_config → make 最後得到 u-boot.bin
燒錄
[email protected]:/home/hjl/Downloads/uboot/sd_fusing# ./sd_fusing.sh /dev/sdb
相關推薦
u-boot 中增加自定義命令hjlcmd2------(新增檔案來定義)
1,在 "[email protected]:/home/hjl/Downloads/uboot/common#" 目錄中新增檔案 cmd_hjl.c ,加上標頭檔案 #include <common.h> &nbs
u-boot 中增加自定義命令hjlcmd1
在uboot/common資料夾下找到command.c檔案,進入編輯: 對照隨便一個命令,如: do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { extern char version_strin
spring中增加自定義配置支持
控制 images 映射 獲取 path efi ade get 處理 spring.schemas 在使用spring時,我們會首先編寫spring的配置文件,在配置文件中,我們除了使用基本的命名空間http://www.springframework.org/schem
Spring Boot中的自定義start pom
sin string cond aps 標註 bind rip ges 由於 start pom是springboot中提供的簡化企業級開發絕大多數場景的一個工具,利用好strat pom就可以消除相關技術的配置得到自動配置好的Bean。 舉個例子,在一般使用中,我們使用基
.net core Identity集成IdentityServer(2) 實現IprofileService接口在accesstoken中增加自定義claims
實現 ets gen 配置 授權 spn cor devel color 導讀1. 如何添加自定義的claims.前請提要目前我們擁有了三個web應用.localhost:40010, 驗證服務器 localhost:40011, mvc客戶端, 充當webapp請求者 l
在spring boot中使用自定義的properties
1 在application.properties中新增 android.name=Tim android.password=123456 新建一個儲存該Setting的配置類, @ConfigurationProperties(prefix="android") public class Andr
在spring boot中如何自定義Exception異常
載著乾貨的老司機 下圖示例: 在service的方法中進行判斷年齡,引數一:message,super關鍵字,呼叫父類的message,引數二:code,均為自定義,具體方法如下: @ControllerAdvice:在於捕獲controller中出現的異常 @Excep
u-boot中nand相關命令使用---- ubi, ubifsls, ubifsmount, ubifsumount
轉載地址:https://blog.csdn.net/voice_shen/article/details/8425763 [Version: 2013-01-rc2] [Author: Bo Shen <[email protected]>] 1. &
Spring Boot中的自定義起步依賴
1.在pom檔案新增自動配置依賴: <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-autoconfigure</art
visual studio 配置屬性中增加自定義巨集和巨集值
visual studio中配置自己的巨集。 下面是vs中的巨集,SolutionDir這個是工程所在目錄資料夾。如何建立自己的巨集呢 檢視->其他視窗->屬性管理器,跳轉到屬性管理器介面。然後選擇一個工程,右鍵出現下圖所示 點選新增新專案屬性表,給屬性表命名一個
JAVA HTTPclient頭中增加自定義的屬性
原文:http://blog.csdn.net/z69183787/article/details/25372971 場景是這樣的,第三方頁面訪問需要鑑權,所以需要在HTTP頭中增加鑑權的屬性和內容傳送給第三方網頁。 我試過用response.addHeader("Aut
u-boot中fdt命令的使用
[u-boot: v2012.10] [Author: Bo Shen <[email protected]>] 依linux community的要求,從linux-3.5後,新提交的code必須對device tree進行支援。下面介紹如何使u-
向android中增加自定義的Linux核心啟動引數
前言,android裝置中常常需要新增自定義的核心配置,如imx51的primary_di定義 pmem定義等,這時需要使用__setup函式,下面的文章中詳述了該過程。 轉:如何增加自定義的Linux核心啟動引數 在驅動開發的過程中,有時為了除錯方便,需要給驅動傳入引數。
u-boot中mmc命令使用
[u-boot: v2013.01] [Author: Bo Shen <[email protected]>] mmc命令的幫助資訊如下: U-Boot> mmc mmc - MMC sub system Usage: mmc
ECharts自定義toolbox中增加自定義按鈕
今天想能不能在ECharts中的ToolBox增加自己的按鈕,然後讀了一下ToolBox程式碼,自己試了試,驗證是可以的。 1、效果圖 圖片中紅色框起來的按鈕 2、程式碼 selfButtons:{//自定義按鈕 danielinbiti,這裡增加,selfbutton
在64位的ubuntu 14.04 上開展32位Qt 程式開發環境配置(pro檔案中增加 QMAKE_CXXFLAGS += -m32 命令)
為了能中一個系統上開發64或32位C++程式,費了些周折,現在終於能夠開始幹過了。在此記錄此時針對Q5.4版本的32位開發環境配置過程。 1. 下載Qt 5.4 的32位版本,進行安裝,安裝過程中會發現一些32位的庫沒有安裝,根據提示的錯誤逐個安裝上即可。 2. 開啟一個SampleCode 中的cube
u-boot裡面快速更新系統命令
搭建好tftp伺服器後,拷貝映象檔案到虛擬機器的tftp目錄,通過下面命令可更新 u-boot,kernel,dts setenv ipaddr 200.200.4.234 setenv serverip 200.200.4.233 run update_uboot run update_k
u-boot中新增mtdparts支援以及Linux的分割槽設定
閱讀目錄(Content) 簡介 作者:彭東林 u-boot版本:u-boot-2015.04 Linux版本:Linux-3.14 硬體平臺:tq2440, 記憶體:64M NandFlash: 256MB 下面我們分兩部分,u-boot和k
在U-boot中新增乙太網驅動
版權宣告:本文為博主原創文章,未經博主允許不得轉載。 https://blog.csdn.net/mao0514/article/details/17523803 當定義CONFIG_CMD_NET和CONFIG_CMD_PING,編譯之後執行ping命令,告警沒有
u-boot中:rm:無法刪除 "asm":是一個目錄
轉自:http://blog.163.com/zhangyingxin_/blog/static/218307222201331291755998/ uboot移植編譯小問題 ———rm:無法刪除 "asm":是一個目錄 我之前所做的uboot移植工作都快要完成了,想要拷貝