8266編譯錯誤 xtensa-lx106-elf/bin/ld: segmentled section `.text' will not fit in region `iram1_0_seg'
一種簡單的解決辦法
Okay, the solution was to copy the libgcc.a file from:
esp-open-sdk/ESP8266_NONOS/lib/
to
esp-open-sdk/xtensa-lx106-elf/lib/gcc/xtensa-lx106-elf/4.8.5
Now everything is working fine! I can't believe it...
相關推薦
8266編譯錯誤 xtensa-lx106-elf/bin/ld: segmentled section `.text39; will not fit in region `iram1_0_seg39;
一種簡單的解決辦法 Okay, the solution was to copy the libgcc.a file from:esp-open-sdk/ESP8266_NONOS/lib/toesp-open-sdk/xtensa-lx106-elf/lib/gcc/xtensa-lx106-elf/4.
exec: "/bin/xtensa-lx106-elf-g++": file does not exist Arduino for 8266 core 開發錯誤解決辦法
修改 exe gcc elf 升級 pat file lib 2.3 可能的原因及解決辦法:因為xtensa-lx106-elf-gcc這個工具沒有完整安裝,刪除當前版本的8266 開發板,然後重新安裝一次即可 問題現象:最近折騰esp8266和arduino的幾塊板子,
編譯出現:【/usr/bin/ld: skipping incompatible * when searching for *】的解決方法
[email protected]:~/6410/linuxcsqlite3$ make gcc sqlite.o -o sqlite -L /home/wzg/6410/sqlite-3.5.9/_install/lib -I/home/wzg/6410/sqlite-3.5.9/_install
編譯過程中提示 /usr/bin/ld: cannot find
在編譯過程中遇到 找不到 /usr/bin/ld: cannot find -lxtst. 首先在本地搜尋該檔案: apt-file/aptitude search xtst; 通過pkg-confi
解決編譯時遇到的/usr/bin/ld: cannot find -lpthreads問題
sudo apt-get update && sudo apt-get install build-essential libevent-pthreads-2.0.5 doxygen
處理VS2010+qt4.8.6下編譯不報錯誤,而Linux下報錯:error: 39;nullptr39; was not declared in this scope
今天處理一個同事在VS2010+qt4.8.6下編寫的程式(能夠正確編譯並執行) 我需要將這個程式移植到arm板上,於是在Linux下對此程式進行交叉編譯 於是,問題來了 這個錯誤提示是:nullptr在當前作用域沒有被宣告。 稍作分析,這個nullptr並不是程式定義的,
vddk 編譯錯誤 /usr/bin/ld:cannot find -lthrift
問題描述 編譯 vddk 時報錯: /usr/bin/ld: cannot find -lthrift collect2: 錯誤:ld 返回 1 make: *** [vddk] 錯誤 1 或者報如下錯誤: In file included fr
CentOS安裝Qt編譯錯誤以及無法除錯的問題解決( /usr/bin/ld:cannot find –lGL 和 Debugginghas failed)
CentOS安裝Qt編譯錯誤以及無法除錯的問題解決 1、前提 系統: CentOS-6.5-x86_64-minimal.iso 最小化linux. 手動安裝x-winodws介面。 Qt版本:qt-opensource-linux-x64-5.6.0.run。 安裝qt需
Linux環境下gcc靜態編譯/usr/bin/ld: cannot find -lc錯誤原因及解決方法 原因:
原因: 一般出現這個問題的時候,Makefile中肯定有-static選項。這其實是靜態連結時沒有找到libc.a。 解決方案: 需要安裝glibc-static.xxx.rpm,如glibc-static-2.12-1.107.el6_4.2.i686.rpm,或是yum install gli
編譯hostapd時,出現錯誤:/usr/bin/ld: cannot find -lnl
[email protected]:/work/project/wifi/04.hostapd/hostapd-2.0/hostapd$ make /usr/bin/ld: cannot find -lnl collect2: ld returned 1 exit
編譯時遇到 /usr/bin/ld: cannot find -lxxx 錯誤的解決方法
本文介紹下,在編譯軟體時,提示usr/bin/ld: cannot find錯誤的解決方法,有需要的朋友參考下。 原因:庫檔案並沒有匯入的ld檢索目錄中。 解決方法: 1、確認庫檔案是否存在,比如-l123, 在/usr/lib, /usr/local/lib,
編譯時遇到/usr/bin/ld: cannot find -lluajit 解決方法
今天編譯一個c++和torch程式的時候爆出了/usr/bin/ld: cannot find -lluajit的錯誤,幾經折騰,終於吧這個問題解決了, 出現這個問題的原因就是luajit沒有安裝到正確的位置. 1.下載luajit http://luajit.org/download.
程式編譯生成的Hex、Bin、axf和elf格式
一、Bin Bin檔案是最純粹的二進位制機器程式碼,按照程式執行順序存放。編譯器把高階語言翻譯成彙編,再把彙編程式碼翻譯成二進位制機器程式碼儲存成bin檔案,因此Bin是沒有經過處理或附加資訊程式原本的大小。Bin檔案內部沒有地址標記,
qt程式編譯錯誤:could not exec ‘/usr/lib/x86_64-linux-gnu/qt4/bin/qmake’
linux下安裝Qt5.7後新增qmake環境變數後出現錯誤 執行: qmake -v 出現錯誤:qmake: could not exec ‘/usr/lib/x86_64-linux-gnu/qt4/bin/qmake’: No such file or directory 分析: qtch
Centos中Qt編譯問題(/usr/bin/ld: 找不到 -lpulse-mainloop-glib,/usr/bin/ld: 找不到 -lpulse...)
Linux下QT編寫一個與視訊播放的程式,出現/usr/bin/ld: 找不到 -lpulse-mainloop-glib,/usr/bin/ld: 找不到 -lpulse 解決辦法: 首先find / -name libpulse.so* 然後cp /usr/li
caffe 錯誤總結 “/usr/bin/ld: 找不到 -lopencv_imgcodecs”
一、錯誤提示:/usr/bin/ld: 找不到 -lopencv_imgcodecs 或者 caffe cannot find lopencv_imgcodecs 二、原因: opencv_imgcodecs is needed and available in opencv 3
gcc連線靜態庫的時候的出現錯誤/usr/bin/ld: cannot find -lc
gcc連線靜態庫的時候出現錯誤提示:/usr/bin/ld: cannot find -lc 具體過程:gcc main.c -o test -Ladd -ladd -Lsub -lsub -Iad
解決 Xcode10 編譯錯誤 ld: library not found for -lstdc++
升級完 Xcode10 之後,開啟老的工程,編譯提示錯誤: ld: library not found for -lstdc++6.0.9 這是因為蘋果在 Xcode10 中移除了 libstdc++ 這個庫,由 libc++ 這個庫取而代之。如果是自己工程裡引用了 libstdc++ 庫,在 Lin
Mac OS X 下命令列編譯錯誤: ld: library not found for -lcrt1.10.6.o
在 Mac OS X 的 10.8.3 的版本中,使用命令列執行 configure 時,生成下面的錯誤: WenBi-MacBook:tcpdump-4.4.0 wenbi$ ./configure checking build system type... x86
處理 /usr/bin/ld: cannot find -lc等編譯問題
用g++編譯C++程式時顯示出: /usr/lib/ld: cannot find -lc /usr/lib/ld: cannot find -lgcc_s /usr/lib/ld: cannot find -lm /usr/lib/ld: cannot find -lgcc_s 的錯誤。在網上看了很多中關於