Android圖片壓縮(質量壓縮和尺寸壓縮) Bitmap轉成字符串上傳
阿新 • • 發佈:2018-12-15
puts 我們 npr 工具 follow doc eth exce eas
在網上調查了圖片壓縮的方法並實裝後,大致上可以認為有兩類壓縮:質量壓縮(不改變圖片的尺寸)和尺寸壓縮(相當於是像素上的壓縮);質量壓縮一般可用於上傳大圖前的處理,這樣就可以節省一定的流量,畢竟現在的手機拍照都能達到3M左右了,尺寸壓縮一般可用於生成縮略圖。
兩種方法都實裝在了我的項目中,結果卻發現在質量壓縮的模塊中,本來1.9M的圖片壓縮後反而變成3M多了,很是奇怪,再做了進一步調查終於知道原因了。下面這個博客說的比較清晰:
android圖片壓縮總結
總結來看,圖片有三種存在形式:硬盤上時是file,網絡傳輸時是stream,內存中是stream或bitmap,所謂的質量壓縮,它其實只能實現對file的影響,你可以把一個file轉成bitmap再轉成file,或者直接將一個bitmap轉成file時,這個最終的file是被壓縮過的,但是中間的bitmap並沒有被壓縮(或者說幾乎沒有被壓縮,我不確定),因為bigmap在內存中的大小是按像素計算的,也就是width * height,對於質量壓縮,並不會改變圖片的像素,所以就算質量被壓縮了,但是bitmap在內存的占有率還是沒變小,但你做成file時,它確實變小了;
而尺寸壓縮由於是減小了圖片的像素,所以它直接對bitmap產生了影響,當然最終的file也是相對的變小了;
最後把自己總結的工具類貼出來:
二、按比例大小壓縮 (路徑獲取圖片)
-------------------------------------------------------------------------------------------------------------------------------- 分享個按照圖片尺寸壓縮:
需要註意兩個問題:
如果你的圖片是File文件,可以用下面代碼:
兩種方法都實裝在了我的項目中,結果卻發現在質量壓縮的模塊中,本來1.9M的圖片壓縮後反而變成3M多了,很是奇怪,再做了進一步調查終於知道原因了。下面這個博客說的比較清晰:
android圖片壓縮總結
總結來看,圖片有三種存在形式:硬盤上時是file,網絡傳輸時是stream,內存中是stream或bitmap,所謂的質量壓縮,它其實只能實現對file的影響,你可以把一個file轉成bitmap再轉成file,或者直接將一個bitmap轉成file時,這個最終的file是被壓縮過的,但是中間的bitmap並沒有被壓縮(或者說幾乎沒有被壓縮,我不確定),因為bigmap在內存中的大小是按像素計算的,也就是width * height,對於質量壓縮,並不會改變圖片的像素,所以就算質量被壓縮了,但是bitmap在內存的占有率還是沒變小,但你做成file時,它確實變小了;
而尺寸壓縮由於是減小了圖片的像素,所以它直接對bitmap產生了影響,當然最終的file也是相對的變小了;
最後把自己總結的工具類貼出來:
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import android.graphics.Bitmap;
import android.graphics.Bitmap.Config;
import android.graphics.BitmapFactory;
/**
* Image compress factory class
*
* @author
*
*/
public class ImageFactory {
/**
* Get bitmap from specified image path
*
* @param imgPath
* @return
*/
public Bitmap getBitmap(String imgPath) {
// Get bitmap through image path
BitmapFactory.Options newOpts = new BitmapFactory.Options();
newOpts.inJustDecodeBounds = false;
newOpts.inPurgeable = true;
newOpts.inInputShareable = true;
// Do not compress
newOpts.inSampleSize = 1;
newOpts.inPreferredConfig = Config.RGB_565;
return BitmapFactory.decodeFile(imgPath, newOpts);
}
/**
* Store bitmap into specified image path
*
* @param bitmap
* @param outPath
* @throws FileNotFoundException
*/
public void storeImage(Bitmap bitmap, String outPath) throws FileNotFoundException {
FileOutputStream os = new FileOutputStream(outPath);
bitmap.compress(Bitmap.CompressFormat.JPEG, 100, os);
}
/**
* Compress image by pixel, this will modify image width/height.
* Used to get thumbnail
*
* @param imgPath image path
* @param pixelW target pixel of width
* @param pixelH target pixel of height
* @return
*/
public Bitmap ratio(String imgPath, float pixelW, float pixelH) {
BitmapFactory.Options newOpts = new BitmapFactory.Options();
// 開始讀入圖片,此時把options.inJustDecodeBounds 設回true,即只讀邊不讀內容
newOpts.inJustDecodeBounds = true;
newOpts.inPreferredConfig = Config.RGB_565;
// Get bitmap info, but notice that bitmap is null now
Bitmap bitmap = BitmapFactory.decodeFile(imgPath,newOpts);
newOpts.inJustDecodeBounds = false;
int w = newOpts.outWidth;
int h = newOpts.outHeight;
// 想要縮放的目標尺寸
float hh = pixelH;// 設置高度為240f時,可以明顯看到圖片縮小了
float ww = pixelW;// 設置寬度為120f,可以明顯看到圖片縮小了
// 縮放比。由於是固定比例縮放,只用高或者寬其中一個數據進行計算即可
int be = 1;//be=1表示不縮放
if (w > h && w > ww) {//如果寬度大的話根據寬度固定大小縮放
be = (int) (newOpts.outWidth / ww);
} else if (w < h && h > hh) {//如果高度高的話根據寬度固定大小縮放
be = (int) (newOpts.outHeight / hh);
}
if (be <= 0) be = 1;
newOpts.inSampleSize = be;//設置縮放比例
// 開始壓縮圖片,註意此時已經把options.inJustDecodeBounds 設回false了
bitmap = BitmapFactory.decodeFile(imgPath, newOpts);
// 壓縮好比例大小後再進行質量壓縮
// return compress(bitmap, maxSize); // 這裏再進行質量壓縮的意義不大,反而耗資源,刪除
return bitmap;
}
/**
* Compress image by size, this will modify image width/height.
* Used to get thumbnail
*
* @param image
* @param pixelW target pixel of width
* @param pixelH target pixel of height
* @return
*/
public Bitmap ratio(Bitmap image, float pixelW, float pixelH) {
ByteArrayOutputStream os = new ByteArrayOutputStream();
image.compress(Bitmap.CompressFormat.JPEG, 100, os);
if( os.toByteArray().length / 1024>1024) {//判斷如果圖片大於1M,進行壓縮避免在生成圖片(BitmapFactory.decodeStream)時溢出
os.reset();//重置baos即清空baos
image.compress(Bitmap.CompressFormat.JPEG, 50, os);//這裏壓縮50%,把壓縮後的數據存放到baos中
}
ByteArrayInputStream is = new ByteArrayInputStream(os.toByteArray());
BitmapFactory.Options newOpts = new BitmapFactory.Options();
//開始讀入圖片,此時把options.inJustDecodeBounds 設回true了
newOpts.inJustDecodeBounds = true;
newOpts.inPreferredConfig = Config.RGB_565;
Bitmap bitmap = BitmapFactory.decodeStream(is, null, newOpts);
newOpts.inJustDecodeBounds = false;
int w = newOpts.outWidth;
int h = newOpts.outHeight;
float hh = pixelH;// 設置高度為240f時,可以明顯看到圖片縮小了
float ww = pixelW;// 設置寬度為120f,可以明顯看到圖片縮小了
//縮放比。由於是固定比例縮放,只用高或者寬其中一個數據進行計算即可
int be = 1;//be=1表示不縮放
if (w > h && w > ww) {//如果寬度大的話根據寬度固定大小縮放
be = (int) (newOpts.outWidth / ww);
} else if (w < h && h > hh) {//如果高度高的話根據寬度固定大小縮放
be = (int) (newOpts.outHeight / hh);
}
if (be <= 0) be = 1;
newOpts.inSampleSize = be;//設置縮放比例
//重新讀入圖片,註意此時已經把options.inJustDecodeBounds 設回false了
is = new ByteArrayInputStream(os.toByteArray());
bitmap = BitmapFactory.decodeStream(is, null, newOpts);
//壓縮好比例大小後再進行質量壓縮
// return compress(bitmap, maxSize); // 這裏再進行質量壓縮的意義不大,反而耗資源,刪除
return bitmap;
}
/**
* Compress by quality, and generate image to the path specified
*
* @param image
* @param outPath
* @param maxSize target will be compressed to be smaller than this size.(kb)
* @throws IOException
*/
public void compressAndGenImage(Bitmap image, String outPath, int maxSize) throws IOException {
ByteArrayOutputStream os = new ByteArrayOutputStream();
// scale
int options = 100;
// Store the bitmap into output stream(no compress)
image.compress(Bitmap.CompressFormat.JPEG, options, os);
// Compress by loop
while ( os.toByteArray().length / 1024 > maxSize) {
// Clean up os
os.reset();
// interval 10
options -= 10;
image.compress(Bitmap.CompressFormat.JPEG, options, os);
}
// Generate compressed image file
FileOutputStream fos = new FileOutputStream(outPath);
fos.write(os.toByteArray());
fos.flush();
fos.close();
}
/**
* Compress by quality, and generate image to the path specified
*
* @param imgPath
* @param outPath
* @param maxSize target will be compressed to be smaller than this size.(kb)
* @param needsDelete Whether delete original file after compress
* @throws IOException
*/
public void compressAndGenImage(String imgPath, String outPath, int maxSize, boolean needsDelete) throws IOException {
compressAndGenImage(getBitmap(imgPath), outPath, maxSize);
// Delete original file
if (needsDelete) {
File file = new File (imgPath);
if (file.exists()) {
file.delete();
}
}
}
/**
* Ratio and generate thumb to the path specified
*
* @param image
* @param outPath
* @param pixelW target pixel of width
* @param pixelH target pixel of height
* @throws FileNotFoundException
*/
public void ratioAndGenThumb(Bitmap image, String outPath, float pixelW, float pixelH) throws FileNotFoundException {
Bitmap bitmap = ratio(image, pixelW, pixelH);
storeImage( bitmap, outPath);
}
/**
* Ratio and generate thumb to the path specified
*
* @param image
* @param outPath
* @param pixelW target pixel of width
* @param pixelH target pixel of height
* @param needsDelete Whether delete original file after compress
* @throws FileNotFoundException
*/
public void ratioAndGenThumb(String imgPath, String outPath, float pixelW, float pixelH, boolean needsDelete) throws FileNotFoundException {
Bitmap bitmap = ratio(imgPath, pixelW, pixelH);
storeImage( bitmap, outPath);
// Delete original file
if (needsDelete) {
File file = new File (imgPath);
if (file.exists()) {
file.delete();
}
}
}
}
如果上面的工具類不滿足你,那麽看看下面的方法。
一、圖片質量壓縮
/**
* 質量壓縮方法
*
* @param image
* @return
*/
public static Bitmap compressImage(Bitmap image) {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
image.compress(Bitmap.CompressFormat.JPEG, 100, baos);// 質量壓縮方法,這裏100表示不壓縮,把壓縮後的數據存放到baos中
int options = 90;
while (baos.toByteArray().length / 1024 > 100) { // 循環判斷如果壓縮後圖片是否大於100kb,大於繼續壓縮
baos.reset(); // 重置baos即清空baos
image.compress(Bitmap.CompressFormat.JPEG, options, baos);// 這裏壓縮options%,把壓縮後的數據存放到baos中
options -= 10;// 每次都減少10
}
ByteArrayInputStream isBm = new ByteArrayInputStream(baos.toByteArray());// 把壓縮後的數據baos存放到ByteArrayInputStream中
Bitmap bitmap = BitmapFactory.decodeStream(isBm, null, null);// 把ByteArrayInputStream數據生成圖片
return bitmap;
}
二、按比例大小壓縮 (路徑獲取圖片)
/**
* 圖片按比例大小壓縮方法
*
* @param srcPath (根據路徑獲取圖片並壓縮)
* @return
*/
public static Bitmap getimage(String srcPath) {
BitmapFactory.Options newOpts = new BitmapFactory.Options();
// 開始讀入圖片,此時把options.inJustDecodeBounds 設回true了
newOpts.inJustDecodeBounds = true;
Bitmap bitmap = BitmapFactory.decodeFile(srcPath, newOpts);// 此時返回bm為空
newOpts.inJustDecodeBounds = false;
int w = newOpts.outWidth;
int h = newOpts.outHeight;
// 現在主流手機比較多是800*480分辨率,所以高和寬我們設置為
float hh = 800f;// 這裏設置高度為800f
float ww = 480f;// 這裏設置寬度為480f
// 縮放比。由於是固定比例縮放,只用高或者寬其中一個數據進行計算即可
int be = 1;// be=1表示不縮放
if (w > h && w > ww) {// 如果寬度大的話根據寬度固定大小縮放
be = (int) (newOpts.outWidth / ww);
} else if (w < h && h > hh) {// 如果高度高的話根據寬度固定大小縮放
be = (int) (newOpts.outHeight / hh);
}
if (be <= 0)
be = 1;
newOpts.inSampleSize = be;// 設置縮放比例
// 重新讀入圖片,註意此時已經把options.inJustDecodeBounds 設回false了
bitmap = BitmapFactory.decodeFile(srcPath, newOpts);
return compressImage(bitmap);// 壓縮好比例大小後再進行質量壓縮
}
三、按比例大小壓縮 (Bitmap)
/**
* 圖片按比例大小壓縮方法
*
* @param image (根據Bitmap圖片壓縮)
* @return
*/
public static Bitmap compressScale(Bitmap image) {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
image.compress(Bitmap.CompressFormat.JPEG, 100, baos);
// 判斷如果圖片大於1M,進行壓縮避免在生成圖片(BitmapFactory.decodeStream)時溢出
if (baos.toByteArray().length / 1024 > 1024) {
baos.reset();// 重置baos即清空baos
image.compress(Bitmap.CompressFormat.JPEG, 80, baos);// 這裏壓縮50%,把壓縮後的數據存放到baos中
}
ByteArrayInputStream isBm = new ByteArrayInputStream(baos.toByteArray());
BitmapFactory.Options newOpts = new BitmapFactory.Options();
// 開始讀入圖片,此時把options.inJustDecodeBounds 設回true了
newOpts.inJustDecodeBounds = true;
Bitmap bitmap = BitmapFactory.decodeStream(isBm, null, newOpts);
newOpts.inJustDecodeBounds = false;
int w = newOpts.outWidth;
int h = newOpts.outHeight;
Log.i(TAG, w + "---------------" + h);
// 現在主流手機比較多是800*480分辨率,所以高和寬我們設置為
// float hh = 800f;// 這裏設置高度為800f
// float ww = 480f;// 這裏設置寬度為480f
float hh = 512f;
float ww = 512f;
// 縮放比。由於是固定比例縮放,只用高或者寬其中一個數據進行計算即可
int be = 1;// be=1表示不縮放
if (w > h && w > ww) {// 如果寬度大的話根據寬度固定大小縮放
be = (int) (newOpts.outWidth / ww);
} else if (w < h && h > hh) { // 如果高度高的話根據高度固定大小縮放
be = (int) (newOpts.outHeight / hh);
}
if (be <= 0)
be = 1;
newOpts.inSampleSize = be; // 設置縮放比例
// newOpts.inPreferredConfig = Config.RGB_565;//降低圖片從ARGB888到RGB565
// 重新讀入圖片,註意此時已經把options.inJustDecodeBounds 設回false了
isBm = new ByteArrayInputStream(baos.toByteArray());
bitmap = BitmapFactory.decodeStream(isBm, null, newOpts);
return compressImage(bitmap);// 壓縮好比例大小後再進行質量壓縮
//return bitmap;
}
-------------------------------------------------------------------------------------------------------------------------------- 分享個按照圖片尺寸壓縮:
public static void compressPicture(String srcPath, String desPath) {
FileOutputStream fos = null;
BitmapFactory.Options op = new BitmapFactory.Options();
// 開始讀入圖片,此時把options.inJustDecodeBounds 設回true了
op.inJustDecodeBounds = true;
Bitmap bitmap = BitmapFactory.decodeFile(srcPath, op);
op.inJustDecodeBounds = false;
// 縮放圖片的尺寸
float w = op.outWidth;
float h = op.outHeight;
float hh = 1024f;//
float ww = 1024f;//
// 最長寬度或高度1024
float be = 1.0f;
if (w > h && w > ww) {
be = (float) (w / ww);
} else if (w < h && h > hh) {
be = (float) (h / hh);
}
if (be <= 0) {
be = 1.0f;
}
op.inSampleSize = (int) be;// 設置縮放比例,這個數字越大,圖片大小越小.
// 重新讀入圖片,註意此時已經把options.inJustDecodeBounds 設回false了
bitmap = BitmapFactory.decodeFile(srcPath, op);
int desWidth = (int) (w / be);
int desHeight = (int) (h / be);
bitmap = Bitmap.createScaledBitmap(bitmap, desWidth, desHeight, true);
try {
fos = new FileOutputStream(desPath);
if (bitmap != null) {
bitmap.compress(Bitmap.CompressFormat.JPEG, 100, fos);
}
} catch (FileNotFoundException e) {
e.printStackTrace();
}
}
需要註意兩個問題:
一、調用getDrawingCache()前先要測量,否則的話得到的bitmap為null,這個我在OnCreate()、OnStart()、OnResume()方法裏都試驗過。
二、當調用bitmap.compress(CompressFormat.JPEG, 100, fos);保存為圖片時發現圖片背景為黑色,如下圖:
這時只需要改成用png保存就可以了,bitmap.compress(CompressFormat.PNG, 100, fos);,如下圖:
在實際開發中,有時候我們需求將文件轉換為字符串,然後作為參數進行上傳。
必備工具類圖片bitmap轉成字符串string與String字符串轉換為bitmap圖片格式
import android.graphics.Bitmap;
import android.graphics.BitmapFactory;
import android.util.Base64;
import java.io.ByteArrayOutputStream;
/**
*
*
* 功能描述:Android開發之常用必備工具類圖片bitmap轉成字符串string與String字符串轉換為bitmap圖片格式
*/
public class BitmapAndStringUtils {
/**
* 圖片轉成string
*
* @param bitmap
* @return
*/
public static String convertIconToString(Bitmap bitmap)
{
ByteArrayOutputStream baos = new ByteArrayOutputStream();// outputstream
bitmap.compress(Bitmap.CompressFormat.PNG, 100, baos);
byte[] appicon = baos.toByteArray();// 轉為byte數組
return Base64.encodeToString(appicon, Base64.DEFAULT);
}
/**
* string轉成bitmap
*
* @param st
*/
public static Bitmap convertStringToIcon(String st)
{
// OutputStream out;
Bitmap bitmap = null;
try
{
// out = new FileOutputStream("/sdcard/aa.jpg");
byte[] bitmapArray;
bitmapArray = Base64.decode(st, Base64.DEFAULT);
bitmap =
BitmapFactory.decodeByteArray(bitmapArray, 0,
bitmapArray.length);
// bitmap.compress(Bitmap.CompressFormat.PNG, 100, out);
return bitmap;
}
catch (Exception e)
{
return null;
}
}
}
如果你的圖片是File文件,可以用下面代碼:
/**
* 圖片文件轉換為指定編碼的字符串
*
* @param imgFile 圖片文件
*/
public static String file2String(File imgFile) {
InputStream in = null;
byte[] data = null;
//讀取圖片字節數組
try{
in = new FileInputStream(imgFile);
data = new byte[in.available()];
in.read(data);
in.close();
} catch (IOException e){
e.printStackTrace();
}
//對字節數組Base64編碼
BASE64Encoder encoder = new BASE64Encoder();
String result = encoder.encode(data);
return result;//返回Base64編碼過的字節數組字符串
}
再分享一下我老師大神的人工智能教程吧。零基礎!通俗易懂!風趣幽默!希望你也加入到我們人工智能的隊伍中來!http://www.captainbed.net
Android圖片壓縮(質量壓縮和尺寸壓縮) Bitmap轉成字符串上傳