查詢程序ID並且kill
#!/bin/sh
count=$(netstat -nl | grep -w 8099 | sed -r 's#.* (.*)/.*#\1#'| wc -l)
if [ 0 == $count ]; then nohup java -jar /aaa.jar --spring.config.location=/aaa/application.yml >/aaa/nohup.out & tail -f nohup.out else kill -9 $(ps -ef | grep order|grep -v grep | awk '{print $2}')
nohup java -jar /aaa.jar --spring.config.location=/aaa/application.yml >/aaa/nohup.out &
tail -f nohup.out fi
相關推薦
查詢程序ID並且kill
#!/bin/sh count=$(netstat -nl | grep -w 8099 | sed -r 's#.* (.*)/.*#\1#'| wc -l) if [ 0 == $count ]; then nohup java -jar /aaa.jar --
如何查詢程序id號,並且使它停止?
開發過程中往往會呼叫其他命令列,同時也就開啟了其他程序,有時候就有可能需要停止它。 舉個列子: Process p = Runtime.getRuntime().exec(cmdA);這裡返回來一個程序p,網上很多人會說,要關掉程序,使用p.destory()方法銷燬掉不
linux查詢程序id端口占用和殺死程序
linux 查詢程序id端口占用和殺死程序 ps 命令用於檢視當前正在執行的程序 輔助上grep 用於搜尋匹配 ps -ef | grep java ps ax : 顯示當前系統程序的列表 ps aux : 顯示當前系統程序詳細列表以及程序使用者 -e 顯示所有程序,環境變數
Linux 通過程式名獲取程序ID並Kill
#!/bin/bash pids=$(ps -ef | grep XXX| awk '{print $2}') for pid in $pids do echo $pid kill -9 $pi
查詢資料的時候 提示事務(程序 ID **)與另一個程序被死鎖在 鎖 資源上,並且已被選作死鎖犧牲品。
在查詢語句中使用 NOLOCK 和 READPAST 處理一個數據庫死鎖的異常時候,其中一個建議就是使用 NOLOCK 或者 READPAST 。有關 NOLOCK 和 READPAST的一些技術知識點: 對於非銀行等嚴格要求事務的行業,搜尋記錄中出現或者不出現某條記錄,都是在可容忍範圍內,所以碰到死鎖,應該
事務(程序 ID 64)與另一個程序被死鎖在 鎖 資源上,並且已被選作死鎖犧牲品。
訪問頻率比較高的app介面,在後臺寫的異常日誌會偶爾出現以下錯誤。 事務(程序 ID 64)與另一個程序被死鎖在 鎖 資源上,並且已被選作死鎖犧牲品。請重新執行該事務 實所有的死鎖最深層的原因就是一個:資源競爭 表現一: 一個使用者A 訪問表A(
mac下查詢佔用埠的程序,並且殺死它
1.sudo lsof -i :8080 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME com.appl
WIN32程序快照以及程序ID和控制代碼查詢
要對程序進行某種操作,就必須首先知道該程序的程序控制代碼或者程序ID,否則一切無從談起,對於程式自己建立的子程序來說,CreateProcess函式返回了程序控制代碼和程序ID,但如果需要除錯系統中已經執行的程序,那就必須首先獲取它們的控制代碼才行。Win32中並沒有直接獲
Linux用ps命令查詢程序PID再用kill命令終止程序的方法
使用linux作業系統,難免遇到一些軟體"卡殼"的問題,這時就需要使用linux下強大的kill命令來結束相關程序。這在linux系統下是極其容易的事情,你只需要kill xxx即可,這裡xxx代表與此軟體執行相關的程序PID號。 首先,我們需要使用linux下另外一
事務(程序 ID 66)與另一個程序被死鎖在 鎖 資源上,並且已被選作死鎖犧牲品。請重新執行該事務
做Silverlight+domainservice+EF程式時,介面實時刷新出現的一個問題。 這個介面中的這幾個列表都是訪問同一個資料表,每隔10秒訪問一次。所以就在執行一段時間的時候出現死鎖的情況 查了查產生死鎖的原因,常見的死鎖情況,修改了一下程式碼 #regi
文本查詢程序——標準庫學習小結
出現的次數 mes ati clu insert res static stat 文件 程序:允許用戶在一個給定文件中查詢單詞,查詢結果是單詞在文件中出現的次數及其所在行的列表。如果一個單詞在一行中出現多次,此行只列出一次。 #include <iostream&g
linux獲取jmeter PID並且kill與啟動
ash pidof too awk 區別 執行 自身 通過 sleep Linux 的交互式 Shell 與 Shell 腳本存在一定的差異,主要是由於後者存在一個獨立的運行進程,因此在獲取進程 pid 上二者也有所區別。 交互式 Bash Shell 獲取進程 pid
01_3_查詢指定id的單個對象
println line ram clas urn main ron center result 01_3_查詢指定id的單個對象 1. 映射文件配置如下信息 <select id="selectStudentById" resultClass="Student"
C++Primer筆記——文本查詢程序(原創,未使用類)
primer color lease NPU 一個 mes getline line 筆記 1 #include <iostream> 2 #include <vector> 3 #include <set> 4
oracle 查詢鎖表和Kill
SELECT l.session_id sid, s.serial#, l.locked_mode,l.oracle_username, l.os_user_name,s.machine, s.t
【MFC】-005 根據程序名獲取程序ID
【MFC】-005 根據程序名獲取程序ID 【MFC】-005 根據程序名獲取程序ID 1、由來 2、實現 3、注意 1、由來 在使用TrackIR5進行位姿跟蹤時,使用網上
thinkphp5怎麼做模糊查詢搜尋,並且倒序分頁查詢的笨辦法
$id=input('lastId');//最新id號 $page=input('page');//獲取頁數 $city='北京';//獲取地址 $minId=input('minId');//獲取最後ID號 $gg=Db::table('think_card')->where([
linux 常用到的命令 刪除 移動 複製 查詢埠 殺死程序 查詢程序
1. 刪除檔案 刪除一個檔案 rm -f 檔案路徑 刪除多個檔案 rm -f 檔案路徑 檔案路徑 ... 刪除資料夾以及資料夾中的檔案 rm -rf 資料夾路徑 刪除多個資料夾以及資料夾中的檔案 rm -rf 資料夾路徑 資料夾路徑 ...
pgrep---以名稱為依據從執行程序佇列中查詢程序
pgrep命令以名稱為依據從執行程序佇列中查詢程序,並顯示查詢到的程序id。每一個程序ID以一個十進位制數表示,通過一個分割字串和下一個ID分開,預設的分割字串是一個新行。對於每個屬性選項,使用者可以在命令列上指定一個以逗號分割的可能值的集合。 語法 pgrep(選項)(引數) 選項 -o:僅顯示找到
Kettle 解決資料鎖的問題(事務(程序 ID 51)與另一個程序被死鎖在 鎖 資源上)
1.Kettle做了一個作業, 執行的時候問題發生在步驟2和步驟3之間,也就是步驟2還未完全執行完的時候,步驟3就要更新步驟2插入的資料,造成死鎖。(我的理解是既然都分開作業了,那麼每個作業都是一個單獨的事務,只有上個事務執行完畢後才會執行下個步驟,為什麼會搶資源呢?另外看網上描述,說Kettle社群版