Python 字串內建使用方法
阿新 • • 發佈:2018-12-17
4.2 字串的常用操作
- 在
ipython3
中定義一個 字串,例如:hello_str = ""
- 輸入
hello_str.
按下TAB
鍵,ipython
會提示 字串 能夠使用的 方法 如下:
In [1]: hello_str. hello_str.capitalize hello_str.isidentifier hello_str.rindex hello_str.casefold hello_str.islower hello_str.rjust hello_str.center hello_str.isnumeric hello_str.rpartition hello_str.count hello_str.isprintable hello_str.rsplit hello_str.encode hello_str.isspace hello_str.rstrip hello_str.endswith hello_str.istitle hello_str.split hello_str.expandtabs hello_str.isupper hello_str.splitlines hello_str.find hello_str.join hello_str.startswith hello_str.format hello_str.ljust hello_str.strip hello_str.format_map hello_str.lower hello_str.swapcase hello_str.index hello_str.lstrip hello_str.title hello_str.isalnum hello_str.maketrans hello_str.translate hello_str.isalpha hello_str.partition hello_str.upper hello_str.isdecimal hello_str.replace hello_str.zfill hello_str.isdigit hello_str.rfind
提示:正是因為 python 內建提供的方法足夠多,才使得在開發時,能夠針對字串進行更加靈活的操作!應對更多的開發需求!
1) 判斷型別
方法 | 說明 |
---|---|
string.isspace() | 如果 string 中只包含空格,則返回 True |
string.isalnum() | 如果 string 至少有一個字元並且所有字元都是字母或數字則返回 True |
string.isalpha() | 如果 string 至少有一個字元並且所有字元都是字母則返回 True |
string.isdecimal() | 如果 string 只包含數字則返回 True,全形數字 |
string.isdigit() | 如果 string 只包含數字則返回 True,全形數字 、⑴ 、\u00b2 |
string.isnumeric() | 如果 string 只包含數字則返回 True,全形數字 ,漢字數字 |
string.istitle() | 如果 string 是標題化的(每個單詞的首字母大寫)則返回 True |
string.islower() | 如果 string 中包含至少一個區分大小寫的字元,並且所有這些(區分大小寫的)字元都是小寫,則返回 True |
string.isupper() | 如果 string 中包含至少一個區分大小寫的字元,並且所有這些(區分大小寫的)字元都是大寫,則返回 True |
2) 查詢和替換
方法 | 說明 |
---|---|
string.startswith(str) | 檢查字串是否是以 str 開頭,是則返回 True |
string.endswith(str) | 檢查字串是否是以 str 結束,是則返回 True |
string.find(str, start=0, end=len(string)) | 檢測 str 是否包含在 string 中,如果 start 和 end 指定範圍,則檢查是否包含在指定範圍內,如果是返回開始的索引值,否則返回 -1 |
string.rfind(str, start=0, end=len(string)) | 類似於 find(),不過是從右邊開始查詢 |
string.index(str, start=0, end=len(string)) | 跟 find() 方法類似,不過如果 str 不在 string 會報錯 |
string.rindex(str, start=0, end=len(string)) | 類似於 index(),不過是從右邊開始 |
string.replace(old_str, new_str, num=string.count(old)) | 把 string 中的 old_str 替換成 new_str,如果 num 指定,則替換不超過 num 次 |
3) 大小寫轉換
方法 | 說明 |
---|---|
string.capitalize() | 把字串的第一個字元大寫 |
string.title() | 把字串的每個單詞首字母大寫 |
string.lower() | 轉換 string 中所有大寫字元為小寫 |
string.upper() | 轉換 string 中的小寫字母為大寫 |
string.swapcase() | 翻轉 string 中的大小寫 |
4) 文字對齊
方法 | 說明 |
---|---|
string.ljust(width) | 返回一個原字串左對齊,並使用空格填充至長度 width 的新字串 |
string.rjust(width) | 返回一個原字串右對齊,並使用空格填充至長度 width 的新字串 |
string.center(width) | 返回一個原字串居中,並使用空格填充至長度 width 的新字串 |
5) 去除空白字元
方法 | 說明 |
---|---|
string.lstrip() | 截掉 string 左邊(開始)的空白字元 |
string.rstrip() | 截掉 string 右邊(末尾)的空白字元 |
string.strip() | 截掉 string 左右兩邊的空白字元 |
6) 拆分和連線
方法 | 說明 |
---|---|
string.partition(str) | 把字串 string 分成一個 3 元素的元組 (str前面, str, str後面) |
string.rpartition(str) | 類似於 partition() 方法,不過是從右邊開始查詢 |
string.split(str="", num) | 以 str 為分隔符拆分 string,如果 num 有指定值,則僅分隔 num + 1 個子字串,str 預設包含 ‘\r’, ‘\t’, ‘\n’ 和空格 |
string.splitlines() | 按照行(’\r’, ‘\n’, ‘\r\n’)分隔,返回一個包含各行作為元素的列表 |
string.join(seq) | 以 string 作為分隔符,將 seq 中所有的元素(的字串表示)合併為一個新的字串 |
4.3 字串的切片
- 切片 方法適用於 字串、列表、元組
- 切片 使用 索引值 來限定範圍,從一個大的 字串 中 切出 小的 字串
- 列表 和 元組 都是 有序 的集合,都能夠 通過索引值 獲取到對應的資料
- 字典 是一個 無序 的集合,是使用 鍵值對 儲存資料