搭建高可用mongodb叢集
轉載自:如下連結
搭建高可用mongodb叢集(一)——配置mongodb
http://www.lanceyan.com/tech/mongodb/mongodb_cluster_1.html
搭建高可用mongodb叢集(二)—— 副本集
http://www.lanceyan.com/tech/mongodb/mongodb_repset1.html
搭建高可用mongodb叢集(三)—— 深入副本集內部機制
http://www.lanceyan.com/tech/mongodb_repset2.html
搭建高可用mongodb叢集(四)—— 分片
http://www.lanceyan.com/tech/arch/mongodb_shard1.html
相關推薦
搬運 搭建高可用mongodb叢集(二)—— 副本集
在上一篇文章《搭建高可用MongoDB叢集(一)——配置MongoDB》 提到了幾個問題還沒有解決。 主節點掛了能否自動切換連線?目前需要手工切換。 主節點的讀寫壓力過大如何解決? 從節點每個上面的資料都是對資料庫全量拷貝,從節點壓力會不會過大? 資料壓力大到機
搭建高可用mongodb叢集
轉載自:如下連結 搭建高可用mongodb叢集(一)——配置mongodb http://www.lanceyan.com/tech/mongodb/mongodb_cluster_1.html 搭建高可用mongodb叢集(二)—— 副本集 http://www.lanceyan.
搭建高可用MongoDB叢集(分片)
搭建高可用MongoDB叢集(分片) KaliArch關注1人評論28269人閱讀2017-12-0
搭建高可用mongodb集群(一)——配置mongodb
st2 cast 取數據 tro .org 功能 mongodb rails fast 搭建高可用mongodb集群(一)——配置mongodb 在大數據的時代,傳統的關系型數據庫要能更高的服務必須要解決高並發讀寫、海量數據高效存儲、高可擴展性和高可用性這些難題。不過
搭建高可用mongodb集群(四)—— 分片
tor cat address pad 業務 [] 日誌信息 ast mongo 搭建高可用mongodb集群(四)—— 分片 按照上一節中《搭建高可用mongodb集群(三)—— 深入副本集》搭建後還有兩個問題沒有解決: 從節點每個上面的數據都是對數據庫全量拷貝,
搭建高可用MongoDB集群(Replica set)
mongodb mongodb副本集 replica set mongodb集群 MongoDB基礎可參考http://blog.51cto.com/kaliarch/2044423一、概述1.1 MongoDB副本集通俗來講,mongodb的副本集相當於具有自動故障恢復的主從集群,主從集群和
搭建高可用mongodb集群(分片)
mongodb3.4分片 mongodb集群 mongodb高可用架構 mongodb副本集+分片 MongoDB基礎請參考:http://blog.51cto.com/kaliarch/2044423MongoDB(replica set)請參考:http://blog.51cto.com/
如何在滴滴雲 DC2 上搭建高可用 MySQL 叢集
前言 MySQL 高可用叢集 MySQL 高可用叢集是通過第三方軟體實現的故障轉移技術,通常是通過 MHA+Keepalived 或者 MHA+ 指令碼等來實現,本例子將採用 Keepalived 實現。 準備 系統硬體 滴滴雲伺服器(DC2):安全可靠,擁有極高的價效比
redis搭建高可用cluster叢集
1 .在redis目錄下新建資料夾 mkdir cluster 2 .在cluster目錄下建立機器節點目錄,每個服務在不同的埠號執行的 我的配置了6個節點,分別執行埠號為7001~7006 3 .將配置檔案redis.conf複製到各
MySQL InnoDB Cluster搭建高可用資料庫叢集(centos7.x)
MySQL官方在4月終於推出了一套完整的、高可用的Mysql解決方案--MySQL InnoDB Cluster。這絕對是程式設計師的福音。以往做mysql主從高可用非常繁瑣,很多坑。現在利用官方的解決方案--MySQL InnoDB Cluster可以比較方便的搭建my
使用piranha搭建高可用LVS叢集
Linux Cluster 使用piranha搭建高可用LVS piranha可以說是搭建高可用LVS叢集裡面,配置起來最簡單的,由redhat提供可基於web頁面進行配置,果然是親生。 DIP=director IP RIP=r
使用keepalived搭建高可用LVS叢集
Linux Cluster 使用keepalived搭建高可用LVS 一般比較常用於搭建高可用叢集的有:heartbeat、keepalived、piranha。 常見的高可用叢集有:高可用LVS叢集、高可用web叢集(keepalived
Mongodb 3.4配置搭建高可用叢集(2)
環境準備Centos6.5 三臺伺服器: 10.68.17.106、10.68.17.109、10.68.17.110 埠分配: mongos:20000、config:21000、shard1:27001、shard2:27002、shard3:27003 分別為每臺機器
高可用HDFS叢集原理筆記及搭建過程
HDFS高可用叢集原理及搭建 如何實現HDFS高可用? HDFS的高可用是HDFS持續對客戶端提供讀、寫服務的能力,因為客戶端對HDFS的讀寫操作之前要訪問namenode伺服器,客戶端需要從namenode端獲取元資料之後才能繼續進行讀、寫。HDFS的高可用的關鍵在於nodenam
SpringCloud --Eureka叢集搭建(高可用服務註冊中心)
Eureka是Spring Cloud框架裡的核心服務, 幾乎每個服務都依賴它。 所以要建立多個Eureka例項程序, 即使其中一個程序掛了, 註冊中心功能仍然正常執行。為了實現高可用,必須叢集 增加Eureka服務註冊中心配置檔案: application-pe
Keepalived + LVS-DR搭建高可用Web伺服器叢集
導航: Keepalived概述 LVS概述 編譯安裝keepalived 配置主排程器 雙機熱備 一、Keepalived概述 keepalived是一個類似於layer3, 4 & 5交換機制的軟體,也就是我們平時說的第3層、第4層和第5層交換。Keepalive
centos7搭建hadoop高可用(ha)叢集
hadoop高可用(ha)叢集實現目標: s101和s105設定為名稱節點,可以互相切換為active狀態; s102~104設定為資料節點和journalnode節點。 準備工作: 1.建立hadoop ha版本 1)進入ha建立目錄 cd /soft/ha
四節點搭建Hadoop HA(高可用)叢集模式
準備工作: 四個節點間的ssh互通,(至少兩個NN節點和其他節點ssh互通); JDK 1.7+,環境變數配置,各節點保持一致; /etc/hosts 節點名對映,各節點保持一致; 保證各元件版本間相容性,推薦使用cdh的jar包 datas : 當做所
基於ubuntu搭建Redis(4.0) Cluster 高可用(HA)叢集環境
What is Redis? Redis is often referred as a data structures server. What this means is that Redis provides access to mutable data
Redis Cluster高可用(HA)叢集環境搭建詳細步驟
1.為什麼要有叢集 由於Redis主從複製架構每個資料庫都要儲存整個叢集中的所有資料,容易形成木桶效應,所以Redis3.0之後的版本新增特性就是叢集(Cluster) 2.Redis叢集架構說明 架構細節: (1)所有的redis節點彼此互聯(PI