oracle的各種常用函式大全
1.字元函式
(1)concat(str1,str2)字串拼接函式
select concat('Hello ','World') from dual; --等價於 select 'Hello '||'World' from dual;
(2)initcap(str)將每個單詞首字母大寫,其他字母小寫
select initcap('hello world!') from dual; --返回結果為'Hello World!' select initcap('HELLO WORLD!') from dual; --返回結果為'Hello World!'
(3)instr(x,find_string[,start][,occurrence])返回指定字串在某字串中的位置,可以指定搜尋的開始位置和返回第幾次搜尋出來的結果
----------搜尋時下標從1開始計算 select instr('Hello World!','o') from dual;--從1位置開始搜尋,返回第一次出現的o的位置,結果為5 select instr('Hello World!','o',6) from dual;--從6位置開始搜尋,返回第一次出現的o的位置,結果為8 select instr('Hello World!','o',1,2) from dual;--從1位置開始搜尋,返回第二次出現o的位置,結果為8
(4)length(str)返回表示式中的字元數
select length('Hello World!') from dual;--返回結果為12 select length('張三') from dual;--返回結果為2
(5)lengthb(str)返回表示式中的位元組數
select lengthb('Hello World!') from dual;--返回結果為12 select lengthb('張三') from dual;--返回結果為6
(6)lower(str)將字串轉換為小寫
select lower('Hello World!') from dual;
(7)upper(str)將字串轉換為大寫
select upper('Hello World!') from dual;
(8)lpad(str,width[,pad_string])當字串長度不夠時,左填充補齊,可以指定補齊時用什麼字元補齊,若不指定,則以空格補齊
select lpad('Hello World!',20) from dual;--返回結果為' Hello World!' select lpad('Hello World!',20,'*') from dual;--返回結果為'********Hello World!'
(9)rpad(str,width[,pad_string])當字串長度不夠時,右填充補齊,原理同左填充
select rpad('Hello World!',20) from dual;--返回結果為'Hello World! ' select rpad('Hello World!',20,'*+') from dual;--返回結果為'Hello World!*+*+*+*+'
(10)ltrim(x[,trim_string])從字串左側去除指定的所有字串,若沒有指定去除的字串,則預設去除左側空白符
select ltrim(' Hello World! ') from dual;--返回結果為'Hello World! ' select ltrim('***+*Hello World!***+*','*+') from dual;--返回結果為'Hello World!***+*'
(11)rtrim(x[,trim_string])從字串右側去除指定的所有字串,原理同ltrim()
select rtrim(' Hello World! ') from dual;--返回結果為' Hello World!' select rtrim('***+*Hello World!***+*','*+') from dual;--返回結果為'***+*Hello World!'
(12)trim(trim_string from x)從字串兩側去除指定的所有字串
select trim('*+' from '***+*Hello World!***+*') from dual;
注意,ltrim()和rtrim()的擷取集可以使多個字元,但trim的擷取集只能有一個字元
select trim('*+' from '***+*Hello World!***+*') from dual;--錯誤,擷取集只能有一個字元
(13)nvl(x,value)將一個NULL轉換為另外一個值,如果x為NULL,則返回value,否則返回x值本身
insert into student values(7,'豬豬',default,NULL); select nvl(address,'北京市') from student;
(14)nvl2(x,value1,value2),如果x不為NULL,返回value1,否則,返回value2
select nvl2(address,'有地址','無地址') from student;
(15)replace(x,search_string,replace_string),從字串x中搜索search_string字串,並使用replace_string字串替換。並不會修改資料庫中原始值
select replace('Hello World!','o','HA') from dual;
(16)substr(x,start[,length])返回字串中的指定的字元,這些字元從字串的第start個位置開始,長度為length個字元;如果start是負數,則從x字串的末尾開始算起;如果 length省略,則將返回一直到字串末尾的所有字元
select substr('Hello World',3) from dual; --返回結果為'llo World' select substr('Hello World',-3) from dual;--返回結果為'rld' select substr('Hello World',3,2) from dual;--返回結果為'll' select substr('Hello World',-7,4) from dual;--返回結果為'o Wo'
2.數值函式
(1)abs(value)返回value的絕對值
select abs(-10) from dual;--返回結果為10
(2)ceil(value)返回大於等於value的最小整數
select ceil(2.3) from dual; --返回結果為3
(3)floor(value)返回小於等於value的最大整數
select floor(2.3) from dual; --返回結果為2
(4)trunc(value,n)對value進行截斷,如果n>0,保留n位小數;n<0,則保留-n位整數位;n=0,則去掉小數部分
select trunc(555.666) from dual; --返回結果為555,不加n時預設去掉小數部分 select trunc(555.666,2) from dual;--返回結果為555.66 select trunc(555.666,-2) from dual;--返回結果為500
(5)round(value,n)對value進行四捨五入,儲存小數點右側的n位。如果n省略的話,相當於n=0的情況
select round(555.666) from dual;--返回結果為556,不加n時預設去掉小數部分 select round(555.666,2) from dual;--返回結果為555.67 select round(555.666,-2) from dual;--返回結果為600
注意:1.trunc和round用法類似,只不過trunc是硬生生擷取,並不進行四捨五入,而round進行擷取時四捨五入 2.都還可以對日期的擷取,可以參考寫的日期函式筆記
select round(sysdate,'year') from dual; select trunc(sysdate,'year') from dual;
3.轉換函式
將值從一種型別轉換成另外一種型別,或者從一種格式轉換為另外一種格式
(1)to_char(x[,format]):將x轉化為字串。 format為轉換的格式,可以為數字格式或日期格式
select to_char('12345.67') from dual; --返回結果為12345.67 select to_char('12345.67','99,999.99') from dual; --返回結果為12,345.67
(2)to_number(x [, format]):將x轉換為數字。可以指定format格式
select to_number('970.13') + 25.5 from dual; select to_number('-$12,345.67', '$99,999.99') from dual;
(3)cast(x as type):將x轉換為指定的相容的資料庫型別
select cast(12345.67 as varchar2(10)),cast('05-7月-07' as date), cast(12345.678 as number(10,2)) from dual;
(4)to_date(x [,format]):將x字串轉換為日期
select to_date('2012-3-15','YYYY-MM-DD') from dual
二.聚集函式
1.常用函式
(1)avg(x):返回x的平均值
select avg(grade) from sc;
(2)count(x):返回統計的行數
select count(name) from sc;
(3)max(x):返回x的最大值
select max(grade) from sc;
(4)min(x):返回x的最小值
select min(grade) from sc;
(5)sum(x):返回x的總計值
select sum(grade) from sc;
2.對分組行使用聚集函式
對分組後的行使用聚集函式,聚集函式會統計每組中的值,對於每組分別統計後返回一個值。
示例
--按照職位分組,求出每個職位的最高和最低工資 select job ,max(sal),min(sal) from emp group by job order by job;
注意:1.分組時select子句後邊的列名必須與group by子句後的列名一致,除非是聚合函式
select deptno,avg(sal) from EMP;--錯誤,因為deptno不是聚集函式,也不是group by後面跟的列名
2.不能使用聚集函式作為WHERE子句的篩選條件
select deptno from emp where avg(sal)>1000;--錯誤
3.分組後,需要使用條件進行篩選,則使用having過濾分組後的行,不能使用where,where只能放在group by前面。
select deptno, avg(sal) from emp where deptno<>10 group by deptno having avg(sal) > 900;