ubuntu 使用vsftpd 建立FTP服務(使用者名稱密碼登入,限制列出目錄)
阿新 • • 發佈:2018-12-29
vsftpd介紹
vsftpd 是“very secure FTP daemon”的縮寫,安全性是它的一個最大的特點。vsftpd 是一個 UNIX 類作業系統上執行的伺服器的名字,它可以執行在諸如 Linux、BSD、Solaris、 HP-UNIX等系統上面,是一個完全免費的、開放原始碼的ftp伺服器軟體,支援很多其他的 FTP 伺服器所不支援的特徵。比如:非常高的安全性需求、頻寬限制、良好的可伸縮性、可建立虛擬使用者、支援IPv6、速率高等。
vsftpd是一款在Linux發行版中最受推崇的FTP伺服器程式。特點是小巧輕快,安全易用。
摘自百度百科-vsftpd
ubuntu 安裝 vsftpd
$ sudo apt-get install vsftpd
使用apt安裝即可。
配置vsftpd
備份vsftpd.config
$ sudo cp /etc/vsftpd.conf /etc/vsftpd.conf.orig
編輯vsftpd.config
手動修改配置,根據下方的patch檔案改一下。
$ sudo vim /etc/vsftpd.config
但是既然做了程式設計師就要懶一點,能自動就自動好了將配置好的檔案與原始檔案使用diff 生成的patch 檔案,儲存到本地,用patch命令更新即可。
--- /etc/vsftpd.conf.orig 2018-02-08 13:39:05.983282023 +0800
+++ /etc/vsftpd.conf 2018-02-10 11:14:15.584088172 +0800
@@ -28,11 +28,11 @@
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
-#write_enable=YES
+write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
-#local_umask=022
+local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
@@ -67,11 +67,11 @@
#
# You may override where the log file goes if you like. The default is shown
# below.
-#xferlog_file=/var/log/vsftpd.log
+xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
-#xferlog_std_format=YES
+xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
@@ -100,7 +100,7 @@
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
-#ftpd_banner=Welcome to blah FTP service.
+ftpd_banner=Welcome Lincoln Linux FTP Service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
@@ -120,9 +120,9 @@
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
-#chroot_list_enable=YES
+chroot_list_enable=YES
# (default follows)
-#chroot_list_file=/etc/vsftpd.chroot_list
+chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
@@ -142,7 +142,7 @@
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
-pam_service_name=vsftpd
+pam_service_name=ftp
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
@@ -152,4 +152,8 @@
#
# Uncomment this to indicate that vsftpd use a utf8 filesystem.
-#utf8_filesystem=YES
+utf8_filesystem=YES
+userlist_enable=YES
+userlist_deny=NO
+userlist_file=/etc/vsftpd.user_list
+allow_writeable_chroot=YES
懶得手動改,可以將上面的patch 檔案儲存到機器上,然後使用
$ cd /
$ sudo patch -p0 < [patch檔案路徑]
這樣就將配置更新了。
建立登入使用者
#先建立ftp目錄
$ sudo mkdir /home/ftpdir
#新增使用者
$ sudo useradd -d /home/ftpdir -s /bin/bash ftpuser
#設定使用者密碼
$ sudo passwd ftpuser
#設定ftp目錄使用者許可權
$ sudo chown ftpuser:ftpuser /home/ftpdir
新增vsftpd 登入使用者
#新建檔案/etc/vsftpd.user_list,用於存放允許訪問ftp的使用者:
$ sudo touch /etc/vsftpd.user_list
$ sudo vim /etc/vsftpd.user_list
在/etc/vsftpd.user_list中新增允許登入ftp 的使用者
ftpuser
新增vsftpd登入使用者對目錄樹的許可權
#新建檔案/etc/vsftpd.chroot_list,設定可列出、切換目錄的使用者:
$ sudo touch /etc/vsftpd.chroot_list
$ sudo vim /etc/vsftpd.chroot_list
在/etc/vsftpd.chroot_list 設定可列出、切換目錄的使用者
ftpuser
重啟 vsftpd 服務
$ sudo service vsftpd restart