Ubuntu14.04交叉編譯BusyBox
轉載地址：https://blog.csdn.net/Q1302182594/article/details/51345988
1 開發環境
宿主機：Ubuntu14.04（32bit）
開發板：Mini2440
BusyBox：1.24.2
2 配置
到BusyBox官網下原始碼並解壓。
2.1 預設配置
進入BusyBox原始碼頂級目錄執行下面的命令進行預設配置：
make defconfig
輸出結果如下：
scripts/kconfig/conf -d Config.in
*
* Busybox Configuration
*
*
* Busybox Settings
*
*
* General Configuration
*
Enable options for full-blown desktop systems (DESKTOP) [Y/n/?] (NEW) y
Provide compatible behavior for rare corner cases (bigger code) (EXTRA_COMPAT) [N/y/?] (NEW) n
Enable obsolete features removed before SUSv3 (INCLUDE_SUSv2) [Y/n/?] (NEW) y
Avoid using GCC-specific code constructs (USE_PORTABLE_CODE) [N/y/?] (NEW) n
Enable Linux-specific applets and features (PLATFORM_LINUX) [Y/?] (NEW) y
Buffer allocation policy
> 1. Allocate with Malloc (FEATURE_BUFFERS_USE_MALLOC) (NEW)
2. Allocate on the Stack (FEATURE_BUFFERS_GO_ON_STACK) (NEW)
3. Allocate in the .bss section (FEATURE_BUFFERS_GO_IN_BSS) (NEW)
choice[1-3?]: 1
Show applet usage messages (SHOW_USAGE) [Y/n/?] (NEW) y
Show verbose applet usage messages (FEATURE_VERBOSE_USAGE) [Y/n/?] (NEW) y
Store applet usage messages in compressed form (FEATURE_COMPRESS_USAGE) [Y/n/?] (NEW) y
Support --install [-s] to install applet links at runtime (FEATURE_INSTALLER) [Y/n/?] (NEW) y
Don't use /usr (INSTALL_NO_USR) [N/y/?] (NEW) n
Enable locale support (system needs locale for this to work) (LOCALE_SUPPORT) [N/y/?] (NEW) n
Support Unicode (UNICODE_SUPPORT) [Y/n/?] (NEW) y
Check $LC_ALL, $LC_CTYPE and $LANG environment variables (FEATURE_CHECK_UNICODE_IN_ENV) [N/y/?] (NEW) n
Character code to substitute unprintable characters with (SUBST_WCHAR) [63] (NEW) 63
Range of supported Unicode characters (LAST_SUPPORTED_WCHAR) [767] (NEW) 767
Allow zero-width Unicode characters on output (UNICODE_COMBINING_WCHARS) [N/y/?] (NEW) n
Allow wide Unicode characters on output (UNICODE_WIDE_WCHARS) [N/y/?] (NEW) n
Bidirectional character-aware line input (UNICODE_BIDI_SUPPORT) [N/y/?] (NEW) n
Make it possible to enter sequences of chars which are not Unicode (UNICODE_PRESERVE_BROKEN) [N/y/?] (NEW) n
Support for PAM (Pluggable Authentication Modules) (PAM) [N/y/?] (NEW) n
Use sendfile system call (FEATURE_USE_SENDFILE) [Y/n/?] (NEW) y
Support for --long-options (LONG_OPTS) [Y/n/?] (NEW) y
Use the devpts filesystem for Unix98 PTYs (FEATURE_DEVPTS) [Y/n/?] (NEW) y
Clean up all memory before exiting (usually not needed) (FEATURE_CLEAN_UP) [N/y/?] (NEW) n
Support utmp file (FEATURE_UTMP) [Y/n/?] (NEW) y
Support wtmp file (FEATURE_WTMP) [Y/n/?] (NEW) y
Support writing pidfiles (FEATURE_PIDFILE) [Y/n/?] (NEW) y
Path to directory for pidfile (PID_FILE_PATH) [/var/run] (NEW) /var/run
Support for SUID/SGID handling (FEATURE_SUID) [Y/n/?] (NEW) y
Runtime SUID/SGID configuration via /etc/busybox.conf (FEATURE_SUID_CONFIG) [Y/n/?] (NEW) y
Suppress warning message if /etc/busybox.conf is not readable (FEATURE_SUID_CONFIG_QUIET) [Y/n/?] (NEW) y
Support NSA Security Enhanced Linux (SELINUX) [N/y/?] (NEW) n
exec prefers applets (FEATURE_PREFER_APPLETS) [N/y/?] (NEW) n
Path to BusyBox executable (BUSYBOX_EXEC_PATH) [/proc/self/exe] (NEW) /proc/self/exe
*
* Build Options
*
Build BusyBox as a static binary (no shared libs) (STATIC) [N/y/?] (NEW) n
Build BusyBox as a position independent executable (PIE) [N/y/?] (NEW) n
Force NOMMU build (NOMMU) [N/y/?] (NEW) n
Build shared libbusybox (BUILD_LIBBUSYBOX) [N/y/?] (NEW) n
Build with Large File Support (for accessing files > 2 GB) (LFS) [Y/n/?] (NEW) y
Cross Compiler prefix (CROSS_COMPILER_PREFIX) [] (NEW)
Path to sysroot (SYSROOT) [] (NEW)
Additional CFLAGS (EXTRA_CFLAGS) [] (NEW)
Additional LDFLAGS (EXTRA_LDFLAGS) [] (NEW)
Additional LDLIBS (EXTRA_LDLIBS) [] (NEW)
*
* Debugging Options
*
Build BusyBox with extra Debugging symbols (DEBUG) [N/y/?] (NEW) n
Build unit tests (UNIT_TEST) [N/y/?] (NEW) n
Abort compilation on any warning (WERROR) [N/y/?] (NEW) n
Additional debugging library
> 1. None (NO_DEBUG_LIB) (NEW)
2. Dmalloc (DMALLOC) (NEW)
3. Electric-fence (EFENCE) (NEW)
choice[1-3?]: 1
*
* Installation Options ("make install" behavior)
*
What kind of applet links to install
> 1. as soft-links (INSTALL_APPLET_SYMLINKS) (NEW)
2. as hard-links (INSTALL_APPLET_HARDLINKS) (NEW)
3. as script wrappers (INSTALL_APPLET_SCRIPT_WRAPPERS) (NEW)
4. not installed (INSTALL_APPLET_DONT) (NEW)
choice[1-4?]: 1
BusyBox installation prefix (PREFIX) [./_install] (NEW) ./_install
*
* Busybox Library Tuning
*
Enable systemd support (FEATURE_SYSTEMD) [Y/n/?] (NEW) y
Support RTMIN[+n] and RTMAX[-n] signal names (FEATURE_RTMINMAX) [Y/n/?] (NEW) y
Minimum password length (PASSWORD_MINLEN) [6] (NEW) 6
MD5: Trade bytes for speed (0:fast, 3:slow) (MD5_SMALL) [1] (NEW) 1
SHA3: Trade bytes for speed (0:fast, 1:slow) (SHA3_SMALL) [1] (NEW) 1
Faster /proc scanning code (+100 bytes) (FEATURE_FAST_TOP) [Y/n/?] (NEW) y
Support for /etc/networks (FEATURE_ETC_NETWORKS) [N/y/?] (NEW) n
Use termios to manipulate the screen (FEATURE_USE_TERMIOS) [Y/n/?] (NEW) y
Command line editing (FEATURE_EDITING) [Y/n/?] (NEW) y
Maximum length of input (FEATURE_EDITING_MAX_LEN) [1024] (NEW) 1024
vi-style line editing commands (FEATURE_EDITING_VI) [N/y/?] (NEW) n
History size (FEATURE_EDITING_HISTORY) [255] (NEW) 255
History saving (FEATURE_EDITING_SAVEHISTORY) [Y/n/?] (NEW) y
Save history on shell exit, not after every command (FEATURE_EDITING_SAVE_ON_EXIT) [N/y/?] (NEW) n
Reverse history search (FEATURE_REVERSE_SEARCH) [Y/n/?] (NEW) y
Tab completion (FEATURE_TAB_COMPLETION) [Y/n/?] (NEW) y
Username completion (FEATURE_USERNAME_COMPLETION) [N/y/?] (NEW) n
Fancy shell prompts (FEATURE_EDITING_FANCY_PROMPT) [Y/n/?] (NEW) y
Query cursor position from terminal (FEATURE_EDITING_ASK_TERMINAL) [N/y/?] (NEW) n
Non-POSIX, but safer, copying to special nodes (FEATURE_NON_POSIX_CP) [Y/n/?] (NEW) y
Give more precise messages when copy fails (cp, mv etc) (FEATURE_VERBOSE_CP_MESSAGE) [N/y/?] (NEW) n
Copy buffer size, in kilobytes (FEATURE_COPYBUF_KB) [4] (NEW) 4
Skip rootfs in mount table (FEATURE_SKIP_ROOTFS) [Y/n/?] (NEW) y
Use clock_gettime(CLOCK_MONOTONIC) syscall (MONOTONIC_SYSCALL) [N/y/?] (NEW) n
Use ioctl names rather than hex values in error messages (IOCTL_HEX2STR_ERROR) [Y/n/?] (NEW) y
Support infiniband HW (FEATURE_HWIB) [Y/n/?] (NEW) y
*
* Applets
*
*
* Archival Utilities
*
Make tar, rpm, modprobe etc understand .xz data (FEATURE_SEAMLESS_XZ) [Y/n/?] (NEW) y
Make tar, rpm, modprobe etc understand .lzma data (FEATURE_SEAMLESS_LZMA) [Y/n/?] (NEW) y
Make tar, rpm, modprobe etc understand .bz2 data (FEATURE_SEAMLESS_BZ2) [Y/n/?] (NEW) y
Make tar, rpm, modprobe etc understand .gz data (FEATURE_SEAMLESS_GZ) [Y/n/?] (NEW) y
tar, rpm, modprobe etc understand .Z data (FEATURE_SEAMLESS_Z) [N/y/?] (NEW) n
ar (AR) [N/y/?] (NEW) n
uncompress (UNCOMPRESS) [N/y/?] (NEW) n
gunzip (GUNZIP) [Y/n/?] (NEW) y
bunzip2 (BUNZIP2) [Y/n/?] (NEW) y
unlzma (UNLZMA) [Y/n/?] (NEW) y
Optimize unlzma for speed (FEATURE_LZMA_FAST) [N/y/?] (NEW) n
Provide lzma alias which supports only unpacking (LZMA) [Y/n/?] (NEW) y
unxz (UNXZ) [Y/n/?] (NEW) y
Provide xz alias which supports only unpacking (XZ) [Y/n/?] (NEW) y
bzip2 (BZIP2) [Y/n/?] (NEW) y
cpio (CPIO) [Y/n/?] (NEW) y
Support for archive creation (FEATURE_CPIO_O) [Y/n/?] (NEW) y
Support for passthrough mode (FEATURE_CPIO_P) [Y/n/?] (NEW) y
dpkg (DPKG) [N/y/?] (NEW) n
dpkg_deb (DPKG_DEB) [N/y/?] (NEW) n
gzip (GZIP) [Y/n/?] (NEW) y
Enable long options (FEATURE_GZIP_LONG_OPTIONS) [Y/n/?] (NEW) y
Trade memory for gzip speed (0:small,slow - 2:fast,big) (GZIP_FAST) [0] (NEW) 0
Enable compression levels (FEATURE_GZIP_LEVELS) [N/y/?] (NEW) n
lzop (LZOP) [Y/n/?] (NEW) y
lzop compression levels 7,8,9 (not very useful) (LZOP_COMPR_HIGH) [N/y/?] (NEW) n
rpm (RPM) [Y/n/?] (NEW) y
rpm2cpio (RPM2CPIO) [Y/n/?] (NEW) y
tar (TAR) [Y/n/?] (NEW) y
Enable archive creation (FEATURE_TAR_CREATE) [Y/n/?] (NEW) y
Autodetect compressed tarballs (FEATURE_TAR_AUTODETECT) [Y/n/?] (NEW) y
Enable -X (exclude from) and -T (include from) options) (FEATURE_TAR_FROM) [Y/n/?] (NEW) y
Support for old tar header format (FEATURE_TAR_OLDGNU_COMPATIBILITY) [Y/n/?] (NEW) y
Enable untarring of tarballs with checksums produced by buggy Sun tar (FEATURE_TAR_OLDSUN_COMPATIBILITY) [Y/n/?] (NEW) y
Support for GNU tar extensions (long filenames) (FEATURE_TAR_GNU_EXTENSIONS) [Y/n/?] (NEW) y
Enable long options (FEATURE_TAR_LONG_OPTIONS) [Y/n/?] (NEW) y
Support for writing to an external program (FEATURE_TAR_TO_COMMAND) [Y/n/?] (NEW) y
Enable use of user and group names (FEATURE_TAR_UNAME_GNAME) [Y/n/?] (NEW) y
Enable -m (do not preserve time) option (FEATURE_TAR_NOPRESERVE_TIME) [Y/n/?] (NEW) y
unzip (UNZIP) [Y/n/?] (NEW) y
*
* Coreutils
*
basename (BASENAME) [Y/n/?] (NEW) y
cat (CAT) [Y/n/?] (NEW) y
date (DATE) [Y/n/?] (NEW) y
Enable ISO date format output (-I) (FEATURE_DATE_ISOFMT) [Y/n/?] (NEW) y
Support %[num]N nanosecond format specifier (FEATURE_DATE_NANO) [N/y/?] (NEW) n
Support weird 'date MMDDhhmm[[YY]YY][.ss]' format (FEATURE_DATE_COMPAT) [Y/n/?] (NEW) y
dd (DD) [Y/n/?] (NEW) y
Enable signal handling for status reporting (FEATURE_DD_SIGNAL_HANDLING) [Y/n/?] (NEW) y
Enable the third status line upon signal (FEATURE_DD_THIRD_STATUS_LINE) [Y/n/?] (NEW) y
Enable ibs, obs and conv options (FEATURE_DD_IBS_OBS) [Y/n/?] (NEW) y
Enable status display options (FEATURE_DD_STATUS) [Y/n/?] (NEW) y
hostid (HOSTID) [Y/n/?] (NEW) y
id (ID) [Y/n/?] (NEW) y
groups (GROUPS) [Y/n/?] (NEW) y
shuf (SHUF) [Y/n/?] (NEW) y
sync (SYNC) [Y/n/?] (NEW) y
Enable -d and -f flags (requres syncfs(2) in libc) (FEATURE_SYNC_FANCY) [Y/n/?] (NEW) y
test (TEST) [Y/n/?] (NEW) y
Extend test to 64 bit (FEATURE_TEST_64) [Y/n/?] (NEW) y
touch (TOUCH) [Y/n/?] (NEW) y
Add support for -h (FEATURE_TOUCH_NODEREF) [Y/n/?] (NEW) y
Add support for SUSV3 features (-d -t -r) (FEATURE_TOUCH_SUSV3) [Y/n/?] (NEW) y
tr (TR) [Y/n/?] (NEW) y
Enable character classes (such as [:upper:]) (FEATURE_TR_CLASSES) [Y/n/?] (NEW) y
Enable equivalence classes (FEATURE_TR_EQUIV) [Y/n/?] (NEW) y
truncate (TRUNCATE) [Y/n/?] (NEW) y
unlink (UNLINK) [Y/n/?] (NEW) y
base64 (BASE64) [Y/n/?] (NEW) y
who (WHO) [Y/n/?] (NEW) y
users (USERS) [Y/n/?] (NEW) y
cal (CAL) [Y/n/?] (NEW) y
catv (CATV) [Y/n/?] (NEW) y
chgrp (CHGRP) [Y/n/?] (NEW) y
chmod (CHMOD) [Y/n/?] (NEW) y
chown (CHOWN) [Y/n/?] (NEW) y
Enable long options (FEATURE_CHOWN_LONG_OPTIONS) [Y/n/?] (NEW) y
chroot (CHROOT) [Y/n/?] (NEW) y
cksum (CKSUM) [Y/n/?] (NEW) y
comm (COMM) [Y/n/?] (NEW) y
cp (CP) [Y/n/?] (NEW) y
Enable long options for cp (FEATURE_CP_LONG_OPTIONS) [Y/n/?] (NEW) y
cut (CUT) [Y/n/?] (NEW) y
df (DF) [Y/n/?] (NEW) y
Enable -a, -i, -B (FEATURE_DF_FANCY) [Y/n/?] (NEW) y
dirname (DIRNAME) [Y/n/?] (NEW) y
dos2unix/unix2dos (DOS2UNIX) [Y/n/?] (NEW) y
du (default blocksize of 512 bytes) (DU) [Y/n/?] (NEW) y
Use a default blocksize of 1024 bytes (1K) (FEATURE_DU_DEFAULT_BLOCKSIZE_1K) [Y/n/?] (NEW) y
echo (basic SuSv3 version taking no options) (ECHO) [Y/n/?] (NEW) y
Enable echo options (-n and -e) (FEATURE_FANCY_ECHO) [Y/n/?] (NEW) y
env (ENV) [Y/n/?] (NEW) y
Enable long options (FEATURE_ENV_LONG_OPTIONS) [Y/n/?] (NEW) y
expand (EXPAND) [Y/n/?] (NEW) y
Enable long options (FEATURE_EXPAND_LONG_OPTIONS) [Y/n/?] (NEW) y
expr (EXPR) [Y/n/?] (NEW) y
Extend Posix numbers support to 64 bit (EXPR_MATH_SUPPORT_64) [Y/n/?] (NEW) y
false (FALSE) [Y/n/?] (NEW) y
fold (FOLD) [Y/n/?] (NEW) y
fsync (FSYNC) [Y/n/?] (NEW) y
head (HEAD) [Y/n/?] (NEW) y
Enable head options (-c, -q, and -v) (FEATURE_FANCY_HEAD) [Y/n/?] (NEW) y
install (INSTALL) [Y/n/?] (NEW) y
Enable long options (FEATURE_INSTALL_LONG_OPTIONS) [Y/n/?] (NEW) y
ln (LN) [Y/n/?] (NEW) y
logname (LOGNAME) [Y/n/?] (NEW) y
ls (LS) [Y/n/?] (NEW) y
Enable filetyping options (-p and -F) (FEATURE_LS_FILETYPES) [Y/n/?] (NEW) y
Enable symlinks dereferencing (-L) (FEATURE_LS_FOLLOWLINKS) [Y/n/?] (NEW) y
Enable recursion (-R) (FEATURE_LS_RECURSIVE) [Y/n/?] (NEW) y
Sort the file names (FEATURE_LS_SORTFILES) [Y/n/?] (NEW) y
Show file timestamps (FEATURE_LS_TIMESTAMPS) [Y/n/?] (NEW) y
Show username/groupnames (FEATURE_LS_USERNAME) [Y/n/?] (NEW) y
Allow use of color to identify file types (FEATURE_LS_COLOR) [Y/n/?] (NEW) y
Produce colored ls output by default (FEATURE_LS_COLOR_IS_DEFAULT) [Y/n/?] (NEW) y
md5sum (MD5SUM) [Y/n/?] (NEW) y
mkdir (MKDIR) [Y/n/?] (NEW) y
Enable long options (FEATURE_MKDIR_LONG_OPTIONS) [Y/n/?] (NEW) y
mkfifo (MKFIFO) [Y/n/?] (NEW) y
mknod (MKNOD) [Y/n/?] (NEW) y
mv (MV) [Y/n/?] (NEW) y
Enable long options (FEATURE_MV_LONG_OPTIONS) [Y/n/?] (NEW) y
nice (NICE) [Y/n/?] (NEW) y
nohup (NOHUP) [Y/n/?] (NEW) y
od (OD) [Y/n/?] (NEW) y
printenv (PRINTENV) [Y/n/?] (NEW) y
printf (PRINTF) [Y/n/?] (NEW) y
pwd (PWD) [Y/n/?] (NEW) y
readlink (READLINK) [Y/n/?] (NEW) y
Enable canonicalization by following all symlinks (-f) (FEATURE_READLINK_FOLLOW) [Y/n/?] (NEW) y
realpath (REALPATH) [Y/n/?] (NEW) y
rm (RM) [Y/n/?] (NEW) y
rmdir (RMDIR) [Y/n/?] (NEW) y
Enable long options (FEATURE_RMDIR_LONG_OPTIONS) [Y/n/?] (NEW) y
seq (SEQ) [Y/n/?] (NEW) y
sha1sum (SHA1SUM) [Y/n/?] (NEW) y
sha256sum (SHA256SUM) [Y/n/?] (NEW) y
sha512sum (SHA512SUM) [Y/n/?] (NEW) y
sha3sum (SHA3SUM) [Y/n/?] (NEW) y
sleep (SLEEP) [Y/n/?] (NEW) y
Enable multiple arguments and s/m/h/d suffixes (FEATURE_FANCY_SLEEP) [Y/n/?] (NEW) y
Enable fractional arguments (FEATURE_FLOAT_SLEEP) [Y/n/?] (NEW) y
sort (SORT) [Y/n/?] (NEW) y
Full SuSv3 compliant sort (support -ktcsbdfiozgM) (FEATURE_SORT_BIG) [Y/n/?] (NEW) y
split (SPLIT) [Y/n/?] (NEW) y
Fancy extensions (FEATURE_SPLIT_FANCY) [Y/n/?] (NEW) y
stat (STAT) [Y/n/?] (NEW) y
Enable custom formats (-c) (FEATURE_STAT_FORMAT) [Y/n/?] (NEW) y
stty (STTY) [Y/n/?] (NEW) y
sum (SUM) [Y/n/?] (NEW) y
tac (TAC) [Y/n/?] (NEW) y
tail (TAIL) [Y/n/?] (NEW) y
Enable extra tail options (-q, -s, -v, and -F) (FEATURE_FANCY_TAIL) [Y/n/?] (NEW) y
tee (TEE) [Y/n/?] (NEW) y
Enable block I/O (larger/faster) instead of byte I/O (FEATURE_TEE_USE_BLOCK_IO) [Y/n/?] (NEW) y
true (TRUE) [Y/n/?] (NEW) y
tty (TTY) [Y/n/?] (NEW) y
uname (UNAME) [Y/n/?] (NEW) y
Operating system name (UNAME_OSNAME) [GNU/Linux] (NEW) GNU/Linux
unexpand (UNEXPAND) [Y/n/?] (NEW) y
Enable long options (FEATURE_UNEXPAND_LONG_OPTIONS) [Y/n/?] (NEW) y
uniq (UNIQ) [Y/n/?] (NEW) y
usleep (USLEEP) [Y/n/?] (NEW) y
uudecode (UUDECODE) [Y/n/?] (NEW) y
uuencode (UUENCODE) [Y/n/?] (NEW) y
wc (WC) [Y/n/?] (NEW) y
Support very large files in wc (FEATURE_WC_LARGE) [Y/n/?] (NEW) y
whoami (WHOAMI) [Y/n/?] (NEW) y
yes (YES) [Y/n/?] (NEW) y
*
* Common options
*
Support verbose options (usually -v) for various applets (FEATURE_VERBOSE) [Y/n/?] (NEW) y
*
* Common options for cp and mv
*
Preserve hard links (FEATURE_PRESERVE_HARDLINKS) [Y/n/?] (NEW) y
*
* Common options for ls, more and telnet
*
Calculate terminal & column widths (FEATURE_AUTOWIDTH) [Y/n/?] (NEW) y
*
* Common options for df, du, ls
*
Support for human readable output (example 13k, 23M, 235G) (FEATURE_HUMAN_READABLE) [Y/n/?] (NEW) y
*
* Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum
*
Enable -c, -s and -w options (FEATURE_MD5_SHA1_SUM_CHECK) [Y/n/?] (NEW) y
*
* Console Utilities
*
chvt (CHVT) [Y/n/?] (NEW) y
fgconsole (FGCONSOLE) [Y/n/?] (NEW) y
clear (CLEAR) [Y/n/?] (NEW) y
deallocvt (DEALLOCVT) [Y/n/?] (NEW) y
dumpkmap (DUMPKMAP) [Y/n/?] (NEW) y
kbd_mode (KBD_MODE) [Y/n/?] (NEW) y
loadfont (LOADFONT) [Y/n/?] (NEW) y
loadkmap (LOADKMAP) [Y/n/?] (NEW) y
openvt (OPENVT) [Y/n/?] (NEW) y
reset (RESET) [Y/n/?] (NEW) y
resize (RESIZE) [Y/n/?] (NEW) y
Print environment variables (FEATURE_RESIZE_PRINT) [Y/n/?] (NEW) y
setconsole (SETCONSOLE) [Y/n/?] (NEW) y
Enable long options (FEATURE_SETCONSOLE_LONG_OPTIONS) [Y/n/?] (NEW) y
setfont (SETFONT) [Y/n/?] (NEW) y
Support reading textual screen maps (FEATURE_SETFONT_TEXTUAL_MAP) [Y/n/?] (NEW) y
Default directory for console-tools files (DEFAULT_SETFONT_DIR) [] (NEW)
setkeycodes (SETKEYCODES) [Y/n/?] (NEW) y
setlogcons (SETLOGCONS) [Y/n/?] (NEW) y
showkey (SHOWKEY) [Y/n/?] (NEW) y
*
* Common options for loadfont and setfont
*
Support for PSF2 console fonts (FEATURE_LOADFONT_PSF2) [Y/n/?] (NEW) y
Support for old (raw) console fonts (FEATURE_LOADFONT_RAW) [Y/n/?] (NEW) y
*
* Debian Utilities
*
mktemp (MKTEMP) [Y/n/?] (NEW) y
pipe_progress (PIPE_PROGRESS) [Y/n/?] (NEW) y
run-parts (RUN_PARTS) [Y/n/?] (NEW) y
Enable long options (FEATURE_RUN_PARTS_LONG_OPTIONS) [Y/n/?] (NEW) y
Support additional arguments (FEATURE_RUN_PARTS_FANCY) [Y/n/?] (NEW) y
start-stop-daemon (START_STOP_DAEMON) [Y/n/?] (NEW) y
Support additional arguments (FEATURE_START_STOP_DAEMON_FANCY) [Y/n/?] (NEW) y
Enable long options (FEATURE_START_STOP_DAEMON_LONG_OPTIONS) [Y/n/?] (NEW) y
which (WHICH) [Y/n/?] (NEW) y
*
* Editors
*
awk (AWK) [Y/n/?] (NEW) y
Enable math functions (requires libm) (FEATURE_AWK_LIBM) [Y/n/?] (NEW) y
Enable a few GNU extensions (FEATURE_AWK_GNU_EXTENSIONS) [Y/n/?] (NEW) y
cmp (CMP) [Y/n/?] (NEW) y
diff (DIFF) [Y/n/?] (NEW) y
Enable long options (FEATURE_DIFF_LONG_OPTIONS) [Y/n/?] (NEW) y
Enable directory support (FEATURE_DIFF_DIR) [Y/n/?] (NEW) y
ed (ED) [Y/n/?] (NEW) y
patch (PATCH) [Y/n/?] (NEW) y
sed (SED) [Y/n/?] (NEW) y
vi (VI) [Y/n/?] (NEW) y
Maximum screen width in vi (FEATURE_VI_MAX_LEN) [4096] (NEW) 4096
Allow vi to display 8-bit chars (otherwise shows dots) (FEATURE_VI_8BIT) [N/y/?] (NEW) n
Enable ":" colon commands (no "ex" mode) (FEATURE_VI_COLON) [Y/n/?] (NEW) y
Enable yank/put commands and mark cmds (FEATURE_VI_YANKMARK) [Y/n/?] (NEW) y
Enable search and replace cmds (FEATURE_VI_SEARCH) [Y/n/?] (NEW) y
Enable regex in search and replace (FEATURE_VI_REGEX_SEARCH) [N/y/?] (NEW) n
Catch signals (FEATURE_VI_USE_SIGNALS) [Y/n/?] (NEW) y
Remember previous cmd and "." cmd (FEATURE_VI_DOT_CMD) [Y/n/?] (NEW) y
Enable -R option and "view" mode (FEATURE_VI_READONLY) [Y/n/?] (NEW) y
Enable set-able options, ai ic showmatch (FEATURE_VI_SETOPTS) [Y/n/?] (NEW) y
Support for :set (FEATURE_VI_SET) [Y/n/?] (NEW) y
Handle window resize (FEATURE_VI_WIN_RESIZE) [Y/n/?] (NEW) y
Use 'tell me cursor position' ESC sequence to measure window (FEATURE_VI_ASK_TERMINAL) [Y/n/?] (NEW) y
Support undo command 'u' (FEATURE_VI_UNDO) [Y/n/?] (NEW) y
Enable undo operation queuing (FEATURE_VI_UNDO_QUEUE) [Y/n/?] (NEW) y
Maximum undo character queue size (FEATURE_VI_UNDO_QUEUE_MAX) [256] (NEW) 256
Allow vi and awk to execute shell commands (FEATURE_ALLOW_EXEC) [Y/n/?] (NEW) y
*
* Finding Utilities
*
find (FIND) [Y/n/?] (NEW) y
Enable -print0: NUL-terminated output (FEATURE_FIND_PRINT0) [Y/n/?] (NEW) y
Enable -mtime: modified time matching (FEATURE_FIND_MTIME) [Y/n/?] (NEW) y
Enable -mmin: modified time matching by minutes (FEATURE_FIND_MMIN) [Y/n/?] (NEW) y
Enable -perm: permissions matching (FEATURE_FIND_PERM) [Y/n/?] (NEW) y
Enable -type: file type matching (file/dir/link/...) (FEATURE_FIND_TYPE) [Y/n/?] (NEW) y
Enable -xdev: 'stay in filesystem' (FEATURE_FIND_XDEV) [Y/n/?] (NEW) y
Enable -mindepth N and -maxdepth N (FEATURE_FIND_MAXDEPTH) [Y/n/?] (NEW) y
Enable -newer: compare file modification times (FEATURE_FIND_NEWER) [Y/n/?] (NEW) y
Enable -inum: inode number matching (FEATURE_FIND_INUM) [Y/n/?] (NEW) y
Enable -exec: execute commands (FEATURE_FIND_EXEC) [Y/n/?] (NEW) y
Enable -exec ... {} + (FEATURE_FIND_EXEC_PLUS) [Y/n/?] (NEW) y
Enable -user: username/uid matching (FEATURE_FIND_USER) [Y/n/?] (NEW) y
Enable -group: group/gid matching (FEATURE_FIND_GROUP) [Y/n/?] (NEW) y
Enable the 'not' (!) operator (FEATURE_FIND_NOT) [Y/n/?] (NEW) y
Enable -depth (FEATURE_FIND_DEPTH) [Y/n/?] (NEW) y
Enable parens in options (FEATURE_FIND_PAREN) [Y/n/?] (NEW) y
Enable -size: file size matching (FEATURE_FIND_SIZE) [Y/n/?] (NEW) y
Enable -prune: exclude subdirectories (FEATURE_FIND_PRUNE) [Y/n/?] (NEW) y
Enable -delete: delete files/dirs (FEATURE_FIND_DELETE) [Y/n/?] (NEW) y
Enable -path: match pathname with shell pattern (FEATURE_FIND_PATH) [Y/n/?] (NEW) y
Enable -regex: match pathname with regex (FEATURE_FIND_REGEX) [Y/n/?] (NEW) y
Enable -links: link count matching (FEATURE_FIND_LINKS) [Y/n/?] (NEW) y
grep (GREP) [Y/n/?] (NEW) y
Enable extended regular expressions (egrep & grep -E) (FEATURE_GREP_EGREP_ALIAS) [Y/n/?] (NEW) y
Alias fgrep to grep -F (FEATURE_GREP_FGREP_ALIAS) [Y/n/?] (NEW) y
Enable before and after context flags (-A, -B and -C) (FEATURE_GREP_CONTEXT) [Y/n/?] (NEW) y
xargs (XARGS) [Y/n/?] (NEW) y
Enable -p: prompt and confirmation (FEATURE_XARGS_SUPPORT_CONFIRMATION) [Y/n/?] (NEW) y
Enable single and double quotes and backslash (FEATURE_XARGS_SUPPORT_QUOTES) [Y/n/?] (NEW) y
Enable -x: exit if -s or -n is exceeded (FEATURE_XARGS_SUPPORT_TERMOPT) [Y/n/?] (NEW) y
Enable -0: NUL-terminated input (FEATURE_XARGS_SUPPORT_ZERO_TERM) [Y/n/?] (NEW) y
Enable -I STR: string to replace (FEATURE_XARGS_SUPPORT_REPL_STR) [Y/n/?] (NEW) y
*
* Init Utilities
*
bootchartd (BOOTCHARTD) [Y/n/?] (NEW) y
Compatible, bloated header (FEATURE_BOOTCHARTD_BLOATED_HEADER) [Y/n/?] (NEW) y
Support bootchartd.conf (FEATURE_BOOTCHARTD_CONFIG_FILE) [Y/n/?] (NEW) y
poweroff, halt, and reboot (HALT) [Y/n/?] (NEW) y
init (INIT) [Y/n/?] (NEW) y
Support reading an inittab file (FEATURE_USE_INITTAB) [Y/n/?] (NEW) y
Support killing processes that have been removed from inittab (FEATURE_KILL_REMOVED) [N/y/?] (NEW) n
Run commands with leading dash with controlling tty (FEATURE_INIT_SCTTY) [Y/n/?] (NEW) y
Enable init to write to syslog (FEATURE_INIT_SYSLOG) [Y/n] (NEW) y
Be _extra_ quiet on boot (FEATURE_EXTRA_QUIET) [Y/n/?] (NEW) y
Support dumping core for child processes (debugging only) (FEATURE_INIT_COREDUMPS) [Y/n/?] (NEW) y
Support running init from within an initrd (not initramfs) (FEATURE_INITRD) [Y/n/?] (NEW) y
Initial terminal type (INIT_TERMINAL_TYPE) [linux] (NEW) linux
mesg (MESG) [Y/n/?] (NEW) y
Enable writing to tty only by group, not by everybody (FEATURE_MESG_ENABLE_ONLY_GROUP) [Y/n/?] (NEW) y
*
* Login/Password Management Utilities
*
add-shell (ADD_SHELL) [Y/n/?] (NEW) y
remove-shell (REMOVE_SHELL) [Y/n/?] (NEW) y
Support for shadow passwords (FEATURE_SHADOWPASSWDS) [Y/n/?] (NEW) y
Use internal password and group functions rather than system functions (USE_BB_PWD_GRP) [Y/n/?] (NEW) y
Use internal shadow password functions (USE_BB_SHADOW) [Y/n/?] (NEW) y
Use internal crypt functions (USE_BB_CRYPT) [Y/n/?] (NEW) y
Enable SHA256/512 crypt functions (USE_BB_CRYPT_SHA) [Y/n/?] (NEW) y
adduser (ADDUSER) [Y/n/?] (NEW) y
Enable long options (FEATURE_ADDUSER_LONG_OPTIONS) [Y/n/?] (NEW) y
Enable sanity check on user/group names in adduser and addgroup (FEATURE_CHECK_NAMES) [N/y/?] (NEW) n
Last valid uid or gid for adduser and addgroup (LAST_ID) [60000] (NEW) 60000
First valid system uid or gid for adduser and addgroup (FIRST_SYSTEM_ID) [100] (NEW) 100
Last valid system uid or gid for adduser and addgroup (LAST_SYSTEM_ID) [999] (NEW) 999
addgroup (ADDGROUP) [Y/n/?] (NEW) y
Enable long options (FEATURE_ADDGROUP_LONG_OPTIONS) [Y/n/?] (NEW) y
Support for adding users to groups (FEATURE_ADDUSER_TO_GROUP) [Y/n/?] (NEW) y
deluser (DELUSER) [Y/n/?] (NEW) y
delgroup (DELGROUP) [Y/n/?] (NEW) y
Support for removing users from groups (FEATURE_DEL_USER_FROM_GROUP) [Y/n/?] (NEW) y
getty (GETTY) [Y/n/?] (NEW) y
login (LOGIN) [Y/n/?] (NEW) y
Run logged in session in a child process (LOGIN_SESSION_AS_CHILD) [N/y/?] (NEW) n
Support for login scripts (LOGIN_SCRIPTS) [Y/n/?] (NEW) y
Support for /etc/nologin (FEATURE_NOLOGIN) [Y/n/?] (NEW) y
Support for /etc/securetty (FEATURE_SECURETTY) [Y/n/?] (NEW) y
passwd (PASSWD) [Y/n/?] (NEW) y
Check new passwords for weakness (FEATURE_PASSWD_WEAK_CHECK) [Y/n/?] (NEW) y
cryptpw (CRYPTPW) [Y/n/?] (NEW) y
chpasswd (CHPASSWD) [Y/n/?] (NEW) y
Default password encryption method (passwd -a, cryptpw -m parameter) (FEATURE_DEFAULT_PASSWD_ALGO) [des] (NEW) des
su (SU) [Y/n/?] (NEW) y
Enable su to write to syslog (FEATURE_SU_SYSLOG) [Y/n] (NEW) y
Enable su to check user's shell to be listed in /etc/shells (FEATURE_SU_CHECKS_SHELLS) [Y/n] (NEW) y
sulogin (SULOGIN) [Y/n/?] (NEW) y
vlock (VLOCK) [Y/n/?] (NEW) y
*
* Linux Ext2 FS Progs
*
chattr (CHATTR) [Y/n/?] (NEW) y
fsck (FSCK) [Y/n/?] (NEW) y
lsattr (LSATTR) [Y/n/?] (NEW) y
tune2fs (TUNE2FS) [N/y/?] (NEW) n
*
* Linux Module Utilities
*
modinfo (MODINFO) [Y/n/?] (NEW) y
Simplified modutils (MODPROBE_SMALL) [Y/n/?] (NEW) y
Accept module options on modprobe command line (FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE) [Y/n/?] (NEW) y
Skip loading of already loaded modules (FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED) [Y/n/?] (NEW) y
*
* Options common to multiple modutils
*
Try to load module from a mmap'ed area (FEATURE_INSMOD_TRY_MMAP) [N/y/?] (NEW) n
Default directory containing modules (DEFAULT_MODULES_DIR) [/lib/modules] (NEW) /lib/modules
Default name of modules.dep (DEFAULT_DEPMOD_FILE) [modules.dep] (NEW) modules.dep
*
* Linux System Utilities
*
blockdev (BLOCKDEV) [Y/n/?] (NEW) y
fatattr (FATATTR) [Y/n/?] (NEW) y
fstrim (FSTRIM) [Y/n/?] (NEW) y
mdev (MDEV) [Y/n/?] (NEW) y
Support /etc/mdev.conf (FEATURE_MDEV_CONF) [Y/n/?] (NEW) y
Support subdirs/symlinks (FEATURE_MDEV_RENAME) [Y/n/?] (NEW) y
Support regular expressions substitutions when renaming device (FEATURE_MDEV_RENAME_REGEXP) [Y/n/?] (NEW) y
Support command execution at device addition/removal (FEATURE_MDEV_EXEC) [Y/n/?] (NEW) y
Support loading of firmwares (FEATURE_MDEV_LOAD_FIRMWARE) [Y/n/?] (NEW) y
mount (MOUNT) [Y/n/?] (NEW) y
Support option -f (FEATURE_MOUNT_FAKE) [Y/n/?] (NEW) y
Support option -v (FEATURE_MOUNT_VERBOSE) [Y/n/?] (NEW) y
Support mount helpers (FEATURE_MOUNT_HELPERS) [N/y/?] (NEW) n
Support specifying devices by label or UUID (FEATURE_MOUNT_LABEL) [Y/n/?] (NEW) y
Support mounting NFS file systems on Linux < 2.6.23 (FEATURE_MOUNT_NFS) [N/y/?] (NEW) n
Support mounting CIFS/SMB file systems (FEATURE_MOUNT_CIFS) [Y/n/?] (NEW) y
Support lots of -o flags in mount (FEATURE_MOUNT_FLAGS) [Y/n/?] (NEW) y
Support /etc/fstab and -a (FEATURE_MOUNT_FSTAB) [Y/n/?] (NEW) y
Support -T <alt_fstab> (FEATURE_MOUNT_OTHERTAB) [Y/n/?] (NEW) y
rev (REV) [Y/n/?] (NEW) y
uevent (UEVENT) [Y/n/?] (NEW) y
acpid (ACPID) [Y/n/?] (NEW) y
Accept and ignore redundant options (FEATURE_ACPID_COMPAT) [Y/n/?] (NEW) y
blkid (BLKID) [Y/n/?] (NEW) y
Print filesystem type (FEATURE_BLKID_TYPE) [N/y/?] (NEW) n
dmesg (DMESG) [Y/n/?] (NEW) y
Pretty dmesg output (FEATURE_DMESG_PRETTY) [Y/n/?] (NEW) y
fbset (FBSET) [Y/n/?] (NEW) y
Turn on extra fbset options (FEATURE_FBSET_FANCY) [Y/n/?] (NEW) y
Turn on fbset readmode support (FEATURE_FBSET_READMODE) [Y/n/?] (NEW) y
fdflush (FDFLUSH) [Y/n/?] (NEW) y
fdformat (FDFORMAT) [Y/n/?] (NEW) y
fdisk (FDISK) [Y/n/?] (NEW) y
Write support (FEATURE_FDISK_WRITABLE) [Y/n/?] (NEW) y
Support AIX disklabels (FEATURE_AIX_LABEL) [N/y/?] (NEW) n
Support SGI disklabels (FEATURE_SGI_LABEL) [N/y/?] (NEW) n
Support SUN disklabels (FEATURE_SUN_LABEL) [N/y/?] (NEW) n
Support BSD disklabels (FEATURE_OSF_LABEL) [N/y/?] (NEW) n
Support GPT disklabels (FEATURE_GPT_LABEL) [N/y/?] (NEW) n
Support expert mode (FEATURE_FDISK_ADVANCED) [Y/n/?] (NEW) y
findfs (FINDFS) [Y/n/?] (NEW) y
flock (FLOCK) [Y/n/?] (NEW) y
freeramdisk (FREERAMDISK) [Y/n/?] (NEW) y
fsck_minix (FSCK_MINIX) [Y/n/?] (NEW) y
mkfs_ext2 (MKFS_EXT2) [Y/n/?] (NEW) y
mkfs_minix (MKFS_MINIX) [Y/n/?] (NEW) y
Support Minix fs v2 (fsck_minix/mkfs_minix) (FEATURE_MINIX2) [Y/n/?] (NEW) y
mkfs_reiser (MKFS_REISER) [N/y/?] (NEW) n
mkfs_vfat (MKFS_VFAT) [Y/n/?] (NEW) y
getopt (GETOPT) [Y/n/?] (NEW) y
Support option -l (FEATURE_GETOPT_LONG) [Y/n/?] (NEW) y
hexdump (HEXDUMP) [Y/n/?] (NEW) y
Support -R, reverse of 'hexdump -Cv' (FEATURE_HEXDUMP_REVERSE) [Y/n/?] (NEW) y
hd (HD) [Y/n/?] (NEW) y
hwclock (HWCLOCK) [Y/n/?] (NEW) y
Support long options (--hctosys,...) (FEATURE_HWCLOCK_LONG_OPTIONS) [Y/n/?] (NEW) y
Use FHS /var/lib/hwclock/adjtime (FEATURE_HWCLOCK_ADJTIME_FHS) [N/y/?] (NEW) n
ipcrm (IPCRM) [Y/n/?] (NEW) y
ipcs (IPCS) [Y/n/?] (NEW) y
losetup (LOSETUP) [Y/n/?] (NEW) y
lspci (LSPCI) [Y/n/?] (NEW) y
lsusb (LSUSB) [Y/n/?] (NEW) y
mkswap (MKSWAP) [Y/n/?] (NEW) y
UUID support (FEATURE_MKSWAP_UUID) [Y/n/?] (NEW) y
more (MORE) [Y/n/?] (NEW) y
pivot_root (PIVOT_ROOT) [Y/n/?] (NEW) y
rdate (RDATE) [Y/n/?] (NEW) y
rdev (RDEV) [Y/n/?] (NEW) y
readprofile (READPROFILE) [Y/n/?] (NEW) y
rtcwake (RTCWAKE) [Y/n/?] (NEW) y
script (SCRIPT) [Y/n/?] (NEW) y
scriptreplay (SCRIPTREPLAY) [Y/n/?] (NEW) y
setarch (SETARCH) [Y/n/?] (NEW) y
swaponoff (SWAPONOFF) [Y/n/?] (NEW) y
Support discard option -d (FEATURE_SWAPON_DISCARD) [Y/n/?] (NEW) y
Support priority option -p (FEATURE_SWAPON_PRI) [Y/n/?] (NEW) y
switch_root (SWITCH_ROOT) [Y/n/?] (NEW) y
umount (UMOUNT) [Y/n/?] (NEW) y
Support option -a (FEATURE_UMOUNT_ALL) [Y/n/?] (NEW) y
*
* Common options for mount/umount
*
Support loopback mounts (FEATURE_MOUNT_LOOP) [Y/n/?] (NEW) y
Create new loopback devices if needed (FEATURE_MOUNT_LOOP_CREATE) [Y/n/?] (NEW) y
Support for the old /etc/mtab file (FEATURE_MTAB_SUPPORT) [N/y/?] (NEW) n
*
* Filesystem/Volume identification
*
btrfs filesystem (FEATURE_VOLUMEID_BTRFS) [Y/n/?] (NEW) y
cramfs filesystem (FEATURE_VOLUMEID_CRAMFS) [Y/n/?] (NEW) y
exFAT filesystem (FEATURE_VOLUMEID_EXFAT) [Y/n/?] (NEW) y
Ext filesystem (FEATURE_VOLUMEID_EXT) [Y/n/?] (NEW) y
f2fs filesystem (FEATURE_VOLUMEID_F2FS) [Y/n/?] (NEW) y
fat filesystem (FEATURE_VOLUMEID_FAT) [Y/n/?] (NEW) y
hfs filesystem (FEATURE_VOLUMEID_HFS) [Y/n/?] (NEW) y
iso9660 filesystem (FEATURE_VOLUMEID_ISO9660) [Y/n/?] (NEW) y
jfs filesystem (FEATURE_VOLUMEID_JFS) [Y/n/?] (NEW) y
linuxraid (FEATURE_VOLUMEID_LINUXRAID) [Y/n/?] (NEW) y
linux swap filesystem (FEATURE_VOLUMEID_LINUXSWAP) [Y/n/?] (NEW) y
luks filesystem (FEATURE_VOLUMEID_LUKS) [Y/n/?] (NEW) y
nilfs filesystem (FEATURE_VOLUMEID_NILFS) [Y/n/?] (NEW) y
ntfs filesystem (FEATURE_VOLUMEID_NTFS) [Y/n/?] (NEW) y
ocfs2 filesystem (FEATURE_VOLUMEID_OCFS2) [Y/n/?] (NEW) y
Reiser filesystem (FEATURE_VOLUMEID_REISERFS) [Y/n/?] (NEW) y
romfs filesystem (FEATURE_VOLUMEID_ROMFS) [Y/n/?] (NEW) y
sysv filesystem (FEATURE_VOLUMEID_SYSV) [Y/n/?] (NEW) y
udf filesystem (FEATURE_VOLUMEID_UDF) [Y/n/?] (NEW) y
xfs filesystem (FEATURE_VOLUMEID_XFS) [Y/n/?] (NEW) y
*
* Miscellaneous Utilities
*
conspy (CONSPY) [Y/n/?] (NEW) y
crond (CROND) [Y/n/?] (NEW) y
Support option -d to redirect output to stderr (FEATURE_CROND_D) [Y/n/?] (NEW) y
Report command output via email (using sendmail) (FEATURE_CROND_CALL_SENDMAIL) [Y/n/?] (NEW) y
crond spool directory (FEATURE_CROND_DIR) [/var/spool/cron] (NEW) /var/spool/cron
i2cget (I2CGET) [Y/n/?] (NEW) y
i2cset (I2CSET) [Y/n/?] (NEW) y
i2cdump (I2CDUMP) [Y/n/?] (NEW) y
i2cdetect (I2CDETECT) [Y/n/?] (NEW) y
less (LESS) [Y/n/?] (NEW) y
Max number of input lines less will try to eat (FEATURE_LESS_MAXLINES) [9999999] (NEW) 9999999
Enable bracket searching (FEATURE_LESS_BRACKETS) [Y/n/?] (NEW) y
Enable -m/-M (FEATURE_LESS_FLAGS) [Y/n/?] (NEW) y
Enable -S (FEATURE_LESS_TRUNCATE) [Y/n/?] (NEW) y
Enable marks (FEATURE_LESS_MARKS) [Y/n/?] (NEW) y
Enable regular expressions (FEATURE_LESS_REGEXP) [Y/n/?] (NEW) y
Enable automatic resizing on window size changes (FEATURE_LESS_WINCH) [Y/n/?] (NEW) y
Use 'tell me cursor position' ESC sequence to measure window (FEATURE_LESS_ASK_TERMINAL) [Y/n/?] (NEW) y
Enable flag changes ('-' command) (FEATURE_LESS_DASHCMD) [Y/n/?] (NEW) y
Enable dynamic switching of line numbers (FEATURE_LESS_LINENUMS) [Y/n/?] (NEW) y
nandwrite (NANDWRITE) [Y/n/?] (NEW) y
nanddump (NANDDUMP) [Y/n/?] (NEW) y
rfkill (RFKILL) [N/y/?] (NEW) n
setserial (SETSERIAL) [Y/n/?] (NEW) y
taskset (TASKSET) [N/y/?] (NEW) n
ubiattach (UBIATTACH) [Y/n/?] (NEW) y
ubidetach (UBIDETACH) [Y/n/?] (NEW) y
ubimkvol (UBIMKVOL) [Y/n/?] (NEW) y
ubirmvol (UBIRMVOL) [Y/n/?] (NEW) y
ubirsvol (UBIRSVOL) [Y/n/?] (NEW) y
ubiupdatevol (UBIUPDATEVOL) [Y/n/?] (NEW) y
wall (WALL) [Y/n/?] (NEW) y
adjtimex (ADJTIMEX) [Y/n/?] (NEW) y
bbconfig (BBCONFIG) [N/y/?] (NEW) n
beep (BEEP) [Y/n/?] (NEW) y
default frequency (FEATURE_BEEP_FREQ) [4000] (NEW) 4000
default length (FEATURE_BEEP_LENGTH_MS) [30] (NEW) 30
chat (CHAT) [Y/n/?] (NEW) y
Enable NOFAIL expect strings (FEATURE_CHAT_NOFAIL) [Y/n/?] (NEW) y
Force STDIN to be a TTY (FEATURE_CHAT_TTY_HIFI) [N/y/?] (NEW) n
Enable implicit Carriage Return (FEATURE_CHAT_IMPLICIT_CR) [Y/n/?] (NEW) y
Swallow options (FEATURE_CHAT_SWALLOW_OPTS) [Y/n/?] (NEW) y
Support weird SEND escapes (FEATURE_CHAT_SEND_ESCAPES) [Y/n/?] (NEW) y
Support variable-length ABORT conditions (FEATURE_CHAT_VAR_ABORT_LEN) [Y/n/?] (NEW) y
Support revoking of ABORT conditions (FEATURE_CHAT_CLR_ABORT) [Y/n/?] (NEW) y
chrt (CHRT) [Y/n/?] (NEW) y
crontab (CRONTAB) [Y/n/?] (NEW) y
dc (DC) [Y/n/?] (NEW) y
Enable power and exp functions (requires libm) (FEATURE_DC_LIBM) [Y/n/?] (NEW) y
devfsd (obsolete) (DEVFSD) [N/y/?] (NEW) n
Use devfs names for all devices (obsolete) (FEATURE_DEVFS) [N/y/?] (NEW) n
devmem (DEVMEM) [Y/n/?] (NEW) y
eject (EJECT) [Y/n/?] (NEW) y
SCSI support (FEATURE_EJECT_SCSI) [Y/n/?] (NEW) y
fbsplash (FBSPLASH) [Y/n/?] (NEW) y
flashcp (FLASHCP) [N/y/?] (NEW) n
flash_lock (FLASH_LOCK) [N/y/?] (NEW) n
flash_unlock (FLASH_UNLOCK) [N/y/?] (NEW) n
flash_eraseall (FLASH_ERASEALL) [N/y/?] (NEW) n
ionice (IONICE) [Y/n/?] (NEW) y
inotifyd (INOTIFYD) [N/y/?] (NEW) n
last (LAST) [Y/n/?] (NEW) y
Choose last implementation
1. small (FEATURE_LAST_SMALL) (NEW)
> 2. huge (FEATURE_LAST_FANCY) (NEW)
choice[1-2]: 2
hdparm (HDPARM) [Y/n/?] (NEW) y
Support obtaining detailed information directly from drives (FEATURE_HDPARM_GET_IDENTITY) [Y/n/?] (NEW) y
Register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_SCAN_HWIF) [Y/n/?] (NEW) y
Un-register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_UNREGISTER_HWIF) [Y/n/?] (NEW) y
Perform device reset (DANGEROUS) (FEATURE_HDPARM_HDIO_DRIVE_RESET) [Y/n/?] (NEW) y
Tristate device for hotswap (DANGEROUS) (FEATURE_HDPARM_HDIO_TRISTATE_HWIF) [Y/n/?] (NEW) y
Get/set using_dma flag (FEATURE_HDPARM_HDIO_GETSET_DMA) [Y/n/?] (NEW) y
makedevs (MAKEDEVS) [Y/n/?] (NEW) y
Choose makedevs behaviour
1. leaf (FEATURE_MAKEDEVS_LEAF) (NEW)
> 2. table (FEATURE_MAKEDEVS_TABLE) (NEW)
choice[1-2]: 2
man (MAN) [Y/n/?] (NEW) y
microcom (MICROCOM) [Y/n/?] (NEW) y
mountpoint (MOUNTPOINT) [Y/n/?] (NEW) y
mt (MT) [Y/n/?] (NEW) y
raidautorun (RAIDAUTORUN) [Y/n/?] (NEW) y
readahead (READAHEAD) [Y/n/?] (NEW) y
runlevel (RUNLEVEL) [Y/n/?] (NEW) y
rx (RX) [Y/n/?] (NEW) y
setsid (SETSID) [Y/n/?] (NEW) y
strings (STRINGS) [Y/n/?] (NEW) y
time (TIME) [Y/n/?] (NEW) y
timeout (TIMEOUT) [Y/n/?] (NEW) y
ttysize (TTYSIZE) [Y/n/?] (NEW) y
volname (VOLNAME) [Y/n/?] (NEW) y
watchdog (WATCHDOG) [Y/n/?] (NEW) y
*
* Networking Utilities
*
nameif (NAMEIF) [Y/n/?] (NEW) y
Extended nameif (FEATURE_NAMEIF_EXTENDED) [Y/n/?] (NEW) y
nbd-client (NBDCLIENT) [Y/n/?] (NEW) y
nc (NC) [Y/n/?] (NEW) y
Netcat server options (-l) (NC_SERVER) [Y/n/?] (NEW) y
Netcat extensions (-eiw and -f FILE) (NC_EXTRA) [Y/n/?] (NEW) y
Netcat 1.10 compatibility (+2.5k) (NC_110_COMPAT) [N/y/?] (NEW) n
ping (PING) [Y/n/?] (NEW) y
ping6 (PING6) [Y/n/?] (NEW) y
Enable fancy ping output (FEATURE_FANCY_PING) [Y/n/?] (NEW) y
wget (WGET) [Y/n/?] (NEW) y
Enable a nifty process meter (+2k) (FEATURE_WGET_STATUSBAR) [Y/n/?] (NEW) y
Enable HTTP authentication (FEATURE_WGET_AUTHENTICATION) [Y/n/?] (NEW) y
Enable long options (FEATURE_WGET_LONG_OPTIONS) [Y/n/?] (NEW) y
Enable timeout option -T SEC (FEATURE_WGET_TIMEOUT) [Y/n/?] (NEW) y
Try to connect to HTTPS using openssl (FEATURE_WGET_OPENSSL) [Y/n/?] (NEW) y
Try to connect to HTTPS using ssl_helper (FEATURE_WGET_SSL_HELPER) [Y/n/?] (NEW) y
whois (WHOIS) [Y/n/?] (NEW) y
Enable IPv6 support (FEATURE_IPV6) [Y/n/?] (NEW) y
Enable Unix domain socket support (usually not needed) (FEATURE_UNIX_LOCAL) [N/y/?] (NEW) n
Prefer IPv4 addresses from DNS queries (FEATURE_PREFER_IPV4_ADDRESS) [Y/n/?] (NEW) y
Verbose resolution errors (VERBOSE_RESOLUTION_ERRORS) [N/y/?] (NEW) n
arp (ARP) [Y/n/?] (NEW) y
arping (ARPING) [Y/n/?] (NEW) y
brctl (BRCTL) [Y/n/?] (NEW) y
Fancy options (FEATURE_BRCTL_FANCY) [Y/n/?] (NEW) y
Support show (FEATURE_BRCTL_SHOW) [Y/n/?] (NEW) y
dnsd (DNSD) [Y/n/?] (NEW) y
ether-wake (ETHER_WAKE) [Y/n/?] (NEW) y
fakeidentd (FAKEIDENTD) [Y/n/?] (NEW) y
ftpd (FTPD) [Y/n/?] (NEW) y
Enable upload commands (FEATURE_FTP_WRITE) [Y/n/?] (NEW) y
Enable workaround for RFC-violating clients (FEATURE_FTPD_ACCEPT_BROKEN_LIST) [Y/n/?] (NEW) y
Enable authentication (FEATURE_FTP_AUTHENTICATION) [Y/n/?] (NEW) y
ftpget (FTPGET) [Y/n/?] (NEW) y
ftpput (FTPPUT) [Y/n/?] (NEW) y
Enable long options in ftpget/ftpput (FEATURE_FTPGETPUT_LONG_OPTIONS) [Y/n/?] (NEW) y
hostname (HOSTNAME) [Y/n/?] (NEW) y
httpd (HTTPD) [Y/n/?] (NEW) y
Support 'Ranges:' header (FEATURE_HTTPD_RANGES) [Y/n/?] (NEW) y
Enable -u <user> option (FEATURE_HTTPD_SETUID) [Y/n/?] (NEW) y
Enable Basic http Authentication (FEATURE_HTTPD_BASIC_AUTH) [Y/n/?] (NEW) y
Support MD5 crypted passwords for http Authentication (FEATURE_HTTPD_AUTH_MD5) [Y/n/?] (NEW) y
Support Common Gateway Interface (CGI) (FEATURE_HTTPD_CGI) [Y/n/?] (NEW) y
Support for running scripts through an interpreter (FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR) [Y/n/?] (NEW) y
Set REMOTE_PORT environment variable for CGI (FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV) [Y/n/?] (NEW) y
Enable -e option (useful for CGIs written as shell scripts) (FEATURE_HTTPD_ENCODE_URL_STR) [Y/n/?] (NEW) y
Support for custom error pages (FEATURE_HTTPD_ERROR_PAGES) [Y/n/?] (NEW) y
Support for reverse proxy (FEATURE_HTTPD_PROXY) [Y/n/?] (NEW) y
Support for GZIP content encoding (FEATURE_HTTPD_GZIP) [Y/n/?] (NEW) y
ifconfig (IFCONFIG) [Y/n/?] (NEW) y
Enable status reporting output (+7k) (FEATURE_IFCONFIG_STATUS) [Y/n/?] (NEW) y
Enable slip-specific options "keepalive" and "outfill" (FEATURE_IFCONFIG_SLIP) [Y/n/?] (NEW) y
Enable options "mem_start", "io_addr", and "irq" (FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ) [Y/n/?] (NEW) y
Enable option "hw" (ether only) (FEATURE_IFCONFIG_HW) [Y/n/?] (NEW) y
Set the broadcast automatically (FEATURE_IFCONFIG_BROADCAST_PLUS) [Y/n/?] (NEW) y
ifenslave (IFENSLAVE) [Y/n/?] (NEW) y
ifplugd (IFPLUGD) [Y/n/?] (NEW) y
ifupdown (IFUPDOWN) [Y/n/?] (NEW) y
Absolute path to ifstate file (IFUPDOWN_IFSTATE_PATH) [/var/run/ifstate] (NEW) /var/run/ifstate
Use ip applet (FEATURE_IFUPDOWN_IP) [Y/n/?] (NEW) y
Use busybox ip applet (FEATURE_IFUPDOWN_IP_BUILTIN) [Y/n/?] (NEW) y
Support for IPv4 (FEATURE_IFUPDOWN_IPV4) [Y/n/?] (NEW) y
Support for IPv6 (FEATURE_IFUPDOWN_IPV6) [Y/n/?] (NEW) y
Enable mapping support (FEATURE_IFUPDOWN_MAPPING) [Y/n/?] (NEW) y
Support for external dhcp clients (FEATURE_IFUPDOWN_EXTERNAL_DHCP) [N/y/?] (NEW) n
inetd (INETD) [Y/n/?] (NEW) y
Support echo service (FEATURE_INETD_SUPPORT_BUILTIN_ECHO) [Y/n/?] (NEW) y
Support discard service (FEATURE_INETD_SUPPORT_BUILTIN_DISCARD) [Y/n/?] (NEW) y
Support time service (FEATURE_INETD_SUPPORT_BUILTIN_TIME) [Y/n/?] (NEW) y
Support daytime service (FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME) [Y/n/?] (NEW) y
Support chargen service (FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN) [Y/n/?] (NEW) y
Support RPC services (FEATURE_INETD_RPC) [Y/n/?] (NEW) y
ip (IP) [Y/?] (NEW) y
ip address (FEATURE_IP_ADDRESS) [Y/?] (NEW) y
ip link (FEATURE_IP_LINK) [Y/?] (NEW) y
ip route (FEATURE_IP_ROUTE) [Y/?] (NEW) y
ip route configuration directory (FEATURE_IP_ROUTE_DIR) [/etc/iproute2] (NEW) /etc/iproute2
ip tunnel (FEATURE_IP_TUNNEL) [Y/n/?] (NEW) y
ip rule (FEATURE_IP_RULE) [Y/n/?] (NEW) y
Support short forms of ip commands (FEATURE_IP_SHORT_FORMS) [Y/n/?] (NEW) y
Support displaying rarely used link types (FEATURE_IP_RARE_PROTOCOLS) [N/y/?] (NEW) n
ipcalc (IPCALC) [Y/n/?] (NEW) y
Fancy IPCALC, more options, adds 1 kbyte (FEATURE_IPCALC_FANCY) [Y/n/?] (NEW) y
Enable long options (FEATURE_IPCALC_LONG_OPTIONS) [Y/n/?] (NEW) y
netstat (NETSTAT) [Y/n/?] (NEW) y
Enable wide netstat output (FEATURE_NETSTAT_WIDE) [Y/n/?] (NEW) y
Enable PID/Program name output (FEATURE_NETSTAT_PRG) [Y/n/?] (NEW) y
nslookup (NSLOOKUP) [Y/n/?] (NEW) y
ntpd (NTPD) [Y/n/?] (NEW) y
Make ntpd usable as a NTP server (FEATURE_NTPD_SERVER) [Y/n/?] (NEW) y
Make ntpd understand /etc/ntp.conf (FEATURE_NTPD_CONF) [Y/n/?] (NEW) y
pscan (PSCAN) [Y/n/?] (NEW) y
route (ROUTE) [Y/n/?] (NEW) y
slattach (SLATTACH) [Y/n/?] (NEW) y
tcpsvd (TCPSVD) [Y/n/?] (NEW) y
telnet (TELNET) [Y/n/?] (NEW) y
Pass TERM type to remote host (FEATURE_TELNET_TTYPE) [Y/n/?] (NEW) y
Pass USER type to remote host (FEATURE_TELNET_AUTOLOGIN) [Y/n/?] (NEW) y
telnetd (TELNETD) [Y/n/?] (NEW) y
Support standalone telnetd (not inetd only) (FEATURE_TELNETD_STANDALONE) [Y/n/?] (NEW) y
Support -w SEC option (inetd wait mode) (FEATURE_TELNETD_INETD_WAIT) [Y/n/?] (NEW) y
tftp (TFTP) [Y/n/?] (NEW) y
tftpd (TFTPD) [Y/n/?] (NEW) y
*
* Common options for tftp/tftpd
*
Enable 'tftp get' and/or tftpd upload code (FEATURE_TFTP_GET) [Y/n/?] (NEW) y
Enable 'tftp put' and/or tftpd download code (FEATURE_TFTP_PUT) [Y/n/?] (NEW) y
Enable 'blksize' and 'tsize' protocol options (FEATURE_TFTP_BLOCKSIZE) [Y/n/?] (NEW) y
Enable tftp progress meter (FEATURE_TFTP_PROGRESS_BAR) [Y/n/?] (NEW) y
Enable debug (TFTP_DEBUG) [N/y/?] (NEW) n
traceroute (TRACEROUTE) [Y/n/?] (NEW) y
traceroute6 (TRACEROUTE6) [Y/n/?] (NEW) y
Enable verbose output (FEATURE_TRACEROUTE_VERBOSE) [Y/n/?] (NEW) y
Enable loose source route (FEATURE_TRACEROUTE_SOURCE_ROUTE) [N/y/?] (NEW) n
Use ICMP instead of UDP (FEATURE_TRACEROUTE_USE_ICMP) [N/y/?] (NEW) n
tunctl (TUNCTL) [Y/n/?] (NEW) y
Support owner:group assignment (FEATURE_TUNCTL_UG) [Y/n/?] (NEW) y
udhcp client for DHCPv6 (udhcpc6) (UDHCPC6) [N/y/?] (NEW) n
udhcp server (udhcpd) (UDHCPD) [Y/n/?] (NEW) y
dhcprelay (DHCPRELAY) [Y/n/?] (NEW) y
Lease display utility (dumpleases) (DUMPLEASES) [Y/n/?] (NEW) y
Rewrite the lease file at every new acknowledge (FEATURE_UDHCPD_WRITE_LEASES_EARLY) [Y/n/?] (NEW) y
Select IP address based on client MAC (FEATURE_UDHCPD_BASE_IP_ON_MAC) [N/y/?] (NEW) n
Absolute path to lease file (DHCPD_LEASES_FILE) [/var/lib/misc/udhcpd.leases] (NEW) /var/lib/misc/udhcpd.leases
udhcp client (udhcpc) (UDHCPC) [Y/n/?] (NEW) y
Verify that the offered address is free, using ARP ping (FEATURE_UDHCPC_ARPING) [Y/n/?] (NEW) y
Do not pass malformed host and domain names (FEATURE_UDHCPC_SANITIZEOPT) [Y/n/?] (NEW) y
Enable '-P port' option for udhcpd and udhcpc (FEATURE_UDHCP_PORT) [N/y/?] (NEW) n
Maximum verbosity level for udhcp applets (0..9) (UDHCP_DEBUG) [9] (NEW) 9
Support for RFC3397 domain search (experimental) (FEATURE_UDHCP_RFC3397) [Y/n/?] (NEW) y
Support for 802.1Q VLAN parameters (FEATURE_UDHCP_8021Q) [Y/n/?] (NEW) y
Absolute path to config script (UDHCPC_DEFAULT_SCRIPT) [/usr/share/udhcpc/default.script] (NEW) /usr/share/udhcpc/default.script
DHCP options slack buffer size (UDHCPC_SLACK_FOR_BUGGY_SERVERS) [80] (NEW) 80
ifup udhcpc command line options (IFUPDOWN_UDHCPC_CMD_OPTIONS) [-R -n] (NEW) -R -n
udpsvd (UDPSVD) [Y/n/?] (NEW) y
vconfig (VCONFIG) [Y/n/?] (NEW) y
zcip (ZCIP) [Y/n/?] (NEW) y
*
* Print Utilities
*
lpd (LPD) [Y/n/?] (NEW) y
lpr (LPR) [Y/n/?] (NEW) y
lpq (LPQ) [Y/n/?] (NEW) y
*
* Mail Utilities
*
makemime (MAKEMIME) [Y/n/?] (NEW) y
Default charset (FEATURE_MIME_CHARSET) [us-ascii] (NEW) us-ascii
popmaildir (POPMAILDIR) [Y/n/?] (NEW) y
Allow message filters and custom delivery program (FEATURE_POPMAILDIR_DELIVERY) [Y/n/?] (NEW) y
reformime (REFORMIME) [Y/n/?] (NEW) y
Accept and ignore options other than -x and -X (FEATURE_REFORMIME_COMPAT) [Y/n/?] (NEW) y
sendmail (SENDMAIL) [Y/n/?] (NEW) y
*
* Process Utilities
*
iostat (IOSTAT) [Y/n/?] (NEW) y
lsof (LSOF) [Y/n/?] (NEW) y
mpstat (MPSTAT) [Y/n/?] (NEW) y
nmeter (NMETER) [Y/n/?] (NEW) y
pmap (PMAP) [Y/n/?] (NEW) y
powertop (POWERTOP) [Y/n/?] (NEW) y
pstree (PSTREE) [Y/n/?] (NEW) y
pwdx (PWDX) [Y/n/?] (NEW) y
smemcap (SMEMCAP) [Y/n/?] (NEW) y
top (TOP) [Y/n/?] (NEW) y
Show CPU per-process usage percentage (FEATURE_TOP_CPU_USAGE_PERCENTAGE) [Y/n/?] (NEW) y
Show CPU global usage percentage (FEATURE_TOP_CPU_GLOBAL_PERCENTS) [Y/n/?] (NEW) y
SMP CPU usage display ('c' key) (FEATURE_TOP_SMP_CPU) [Y/n/?] (NEW) y
Show 1/10th of a percent in CPU/mem statistics (FEATURE_TOP_DECIMALS) [Y/n/?] (NEW) y
Show CPU process runs on ('j' field) (FEATURE_TOP_SMP_PROCESS) [Y/n/?] (NEW) y
Topmem command ('s' key) (FEATURE_TOPMEM) [Y/n/?] (NEW) y
uptime (UPTIME) [Y/n/?] (NEW) y
Support for showing the number of users (FEATURE_UPTIME_UTMP_SUPPORT) [Y/n/?] (NEW) y
free (FREE) [Y/n/?] (NEW) y
fuser (FUSER) [Y/n/?] (NEW) y
kill (KILL) [Y/n/?] (NEW) y
killall (KILLALL) [Y/n/?] (NEW) y
killall5 (KILLALL5) [Y/n] (NEW) y
pgrep (PGREP) [Y/n/?] (NEW) y
pidof (PIDOF) [Y/n/?] (NEW) y
Enable argument for single shot (-s) (FEATURE_PIDOF_SINGLE) [Y/n/?] (NEW) y
Enable argument for omitting pids (-o) (FEATURE_PIDOF_OMIT) [Y/n/?] (NEW) y
pkill (PKILL) [Y/n/?] (NEW) y
ps (PS) [Y/n/?] (NEW) y
Enable time and elapsed time output (FEATURE_PS_TIME) [Y/n/?] (NEW) y
Enable additional ps columns (FEATURE_PS_ADDITIONAL_COLUMNS) [Y/n/?] (NEW) y
Support Linux prior to 2.4.0 and non-ELF systems (FEATURE_PS_UNUSUAL_SYSTEMS) [N/y/?] (NEW) n
renice (RENICE) [Y/n/?] (NEW) y
sysctl (BB_SYSCTL) [Y/n/?] (NEW) y
Support for showing threads in ps/pstree/top (FEATURE_SHOW_THREADS) [Y/n/?] (NEW) y
watch (WATCH) [Y/n/?] (NEW) y
*
* Runit Utilities
*
runsv (RUNSV) [Y/n/?] (NEW) y
runsvdir (RUNSVDIR) [Y/n/?] (NEW) y
Enable scrolling argument log (FEATURE_RUNSVDIR_LOG) [N/y/?] (NEW) n
sv (SV) [Y/n/?] (NEW) y
Default directory for services (SV_DEFAULT_SERVICE_DIR) [/var/service] (NEW) /var/service
svlogd (SVLOGD) [Y/n/?] (NEW) y
chpst (CHPST) [Y/n/?] (NEW) y
setuidgid (SETUIDGID) [Y/n/?] (NEW) y
envuidgid (ENVUIDGID) [Y/n/?] (NEW) y
envdir (ENVDIR) [Y/n/?] (NEW) y
softlimit (SOFTLIMIT) [Y/n/?] (NEW) y
*
* Shells
*
ash (ASH) [Y/n/?] (NEW) y
bash-compatible extensions (ASH_BASH_COMPAT) [Y/n/?] (NEW) y
Idle timeout variable (ASH_IDLE_TIMEOUT) [N/y/?] (NEW) n
Job control (ASH_JOB_CONTROL) [Y/n/?] (NEW) y
Alias support (ASH_ALIAS) [Y/n/?] (NEW) y
Builtin getopt to parse positional parameters (ASH_GETOPTS) [Y/n/?] (NEW) y
Builtin version of 'echo' (ASH_BUILTIN_ECHO) [Y/n/?] (NEW) y
Builtin version of 'printf' (ASH_BUILTIN_PRINTF) [Y/n/?] (NEW) y
Builtin version of 'test' (ASH_BUILTIN_TEST) [Y/n/?] (NEW) y
help builtin (ASH_HELP) [Y/n/?] (NEW) y
'command' command to override shell builtins (ASH_CMDCMD) [Y/n/?] (NEW) y
Check for new mail on interactive shells (ASH_MAIL) [N/y/?] (NEW) n
Optimize for size instead of speed (ASH_OPTIMIZE_FOR_SIZE) [Y/n/?] (NEW) y
Pseudorandom generator and $RANDOM variable (ASH_RANDOM_SUPPORT) [Y/n/?] (NEW) y
Expand prompt string (ASH_EXPAND_PRMT) [Y/n/?] (NEW) y
cttyhack (CTTYHACK) [Y/n/?] (NEW) y
hush (HUSH) [Y/n/?] (NEW) y
bash-compatible extensions (HUSH_BASH_COMPAT) [Y/n/?] (NEW) y
Brace expansion (HUSH_BRACE_EXPANSION) [Y/n/?] (NEW) y
help builtin (HUSH_HELP) [Y/n/?] (NEW) y
Interactive mode (HUSH_INTERACTIVE) [Y/n/?] (NEW) y
Save command history to .hush_history (HUSH_SAVEHISTORY) [Y/n/?] (NEW) y
Job control (HUSH_JOB) [Y/n/?] (NEW) y
Process substitution (HUSH_TICK) [Y/n/?] (NEW) y
Support if/then/elif/else/fi (HUSH_IF) [Y/n/?] (NEW) y
Support for, while and until loops (HUSH_LOOPS) [Y/n/?] (NEW) y
Support case ... esac statement (HUSH_CASE) [Y/n/?] (NEW) y
Support funcname() { commands; } syntax (HUSH_FUNCTIONS) [Y/n/?] (NEW) y
Support local builtin (HUSH_LOCAL) [Y/n/?] (NEW) y
Pseudorandom generator and $RANDOM variable (HUSH_RANDOM_SUPPORT) [Y/n/?] (NEW) y
Support 'export -n' option (HUSH_EXPORT_N) [Y/n/?] (NEW) y
Support 'hush -x' option and 'set -x' command (HUSH_MODE_X) [Y/n/?] (NEW) y
msh (deprecated: aliased to hush) (MSH) [N/y/?] (NEW) n
Choose which shell is aliased to 'sh' name
> 1. ash (FEATURE_SH_IS_ASH) (NEW)
2. hush (FEATURE_SH_IS_HUSH) (NEW)
3. none (FEATURE_SH_IS_NONE) (NEW)
choice[1-3?]: 1
Choose which shell is aliased to 'bash' name
1. ash (FEATURE_BASH_IS_ASH) (NEW)
2. hush (FEATURE_BASH_IS_HUSH) (NEW)
> 3. none (FEATURE_BASH_IS_NONE) (NEW)
choice[1-3?]: 3
POSIX math support (SH_MATH_SUPPORT) [Y/n/?] (NEW) y
Extend POSIX math support to 64 bit (SH_MATH_SUPPORT_64) [Y/n/?] (NEW) y
Hide message on interactive shell startup (FEATURE_SH_EXTRA_QUIET) [Y/n/?] (NEW) y
Use $HISTFILESIZE (FEATURE_SH_HISTFILESIZE) [Y/n/?] (NEW) y
*
* System Logging Utilities
*
syslogd (SYSLOGD) [Y/n/?] (NEW) y
Rotate message files (FEATURE_ROTATE_LOGFILE) [Y/n/?] (NEW) y
Remote Log support (FEATURE_REMOTE_LOG) [Y/n/?] (NEW) y
Support -D (drop dups) option (FEATURE_SYSLOGD_DUP) [Y/n/?] (NEW) y
Support syslog.conf (FEATURE_SYSLOGD_CFG) [Y/n/?] (NEW) y
Read buffer size in bytes (FEATURE_SYSLOGD_READ_BUFFER_SIZE) [256] (NEW) 256
Circular Buffer support (FEATURE_IPC_SYSLOG) [Y/n/?] (NEW) y
Circular buffer size in Kbytes (minimum 4KB) (FEATURE_IPC_SYSLOG_BUFFER_SIZE) [16] (NEW) 16
logread (LOGREAD) [Y/n/?] (NEW) y
Double buffering (FEATURE_LOGREAD_REDUCED_LOCKING) [Y/n/?] (NEW) y
Linux kernel printk buffer support (FEATURE_KMSG_SYSLOG) [Y/n/?] (NEW) y
klogd (KLOGD) [Y/n/?] (NEW) y
*
* klogd should not be used together with syslog to kernel printk buffer
*
Use the klogctl() interface (FEATURE_KLOGD_KLOGCTL) [Y/n/?] (NEW) y
logger (LOGGER) [Y/n/?] (NEW) y
2.2 選單配置
BusyBoxy各目錄都有一個Config.in檔案，裡面儲存了BusyBox的配置資訊，我們可以手動修改Config.in以達到配置的目的，但是這樣子比較麻煩。所幸的是，BusyBox提供了一個選單式的配置工具，執行如下命令即可調出此工具：
make menuconfig
配置介面如下圖：
圖1 BusyBox選單配置主介面
第一次執行make menucofig時，可能會出錯：
圖2 啟動BusyBox選單配置時遇到的問題
根據上圖紅色圈住部分的提示可知，當前系統缺乏curses.h標頭檔案，執行下面命令安裝curves即可：
sudo apt-get install libncurses-dev
2.2.1 編譯設定
Busybox Settings --->
Build Options --->
圖3 編譯設定
（1）靜態編譯
通過空格鍵使能Build BusyBox as a static binary（no shared libs）（對應的方括號處顯示星號*即為使能狀態）。
（2）交叉工具鏈字首
設定Cross Compiler prefix如下所示（具體路徑和交叉工具鏈字首根據實際情況修改）：
圖4 交叉工具鏈字首
若將交叉編譯工具鏈的路徑（home/liyihaiMini2440/Toolschain/4.4.3/bin）新增到Ubuntu的PATH環境變數中，則在上圖中只要指定arm-linux-即可，若當前系統中沒有相應的交叉工具鏈或者輸入有誤，在儲存退出時會提示錯誤：
圖5 交叉工具鏈輸入錯誤
2.2.2 安裝設定
Busybox Settings --->
Installation Options("make install" behavior) --->
圖6 安裝設定
由上圖可見，預設情況下值執行make install時BusyBox會被安裝在其頂層目錄的_install目錄中。安裝目錄可以根據需要進行修改：通過向下方向鍵選中上圖的（./_install）BusyBox installatiion prefix選項，然後輸入安裝路徑即可：
圖7 BusyBox安裝路徑
2.2.3 基本配置
Busybox Settings --->
General Configuration --->
[*]Don't use /usr
這個必需選中，否則在安裝的時候將會將BusyBox安裝在Ubuntu的/usr目錄中，從而損壞了宿主機的根檔案系統！
2.2.4 退出儲存
退出時記得確認儲存，否則上述配置無效。
圖8 退出儲存
3 編譯
make
若沒有在圖4中設定交叉編譯工具鏈字首，則需要通過下述命令比編譯和安裝：
make ARCH=arm CROSS_COMPILE=arm-linux- CONFIG_PREFIX=/home/liyihai/Mini2440/rootfs all install
3.1 編譯錯誤
執行make命令編譯時（使用友善之臂的交叉工具鏈），出現錯誤如下：
圖9 友善之臂交叉編譯器編譯錯誤
改用創龍的交叉工具鏈，出現錯誤如下：
圖10 創龍交叉編譯器編譯錯誤
上述兩幅圖的錯誤是不一樣的，因此可知說出現的錯誤與具體的編譯器有關！
3.2 搜尋選項
配置選項特別多，且在不同的BusyBox版本中，同一個選項可能會被安排到不同的選單中，因此人工查閱特定的選項比較麻煩，幸好有搜尋選項的工具，在任意選單介面中輸入斜槓“/”即可進入搜尋框：
圖11 搜尋框
在上圖中輸入util關鍵字，搜尋結果如下：
&nb