##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server.     #
#                                            #
# This configuration can be used by multiple #
# clients, however each client should have   #
# its own cert and key files.                #
#                                            #
# On Windows, you might want to rename this  #
# file so it has a .ovpn extension           #
##############################################


# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client


# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
dev tap
;dev tun


# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one.  On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap


# Are we connecting to a TCP or
# UDP server?  Use the same setting as
# on the server.
;proto tcp
proto udp


# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote 112.74.110.18 1194  //這是要修改的地方

;remote my-server-2 1194


# Choose a random host from the remote
# list for load-balancing.  Otherwise
# try hosts in the order specified.
;remote-random


# Keep trying indefinitely to resolve the
# host name of the OpenVPN server.  Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite


# Most clients don't need to bind to
# a specific local port number.
nobind


# Downgrade privileges after initialization (non-Windows only)
user nobody
group nobody


# Try to preserve some state across restarts.
persist-key
persist-tun


# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here.  See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]


# Wireless networks often produce a lot
# of duplicate packets.  Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings


# SSL/TLS parms.
# See the server config file for more
# description.  It's best to use
# a separate .crt/.key file pair
# for each client.  A single ca
# file can be used for all clients.
ca "E:\\各種軟體\\百度雲盤\\openregist\\OpenVPN\\config\\ca.crt"
cert "E:\\各種軟體\\百度雲盤\\openregist\\OpenVPN\\config\\dengwangbao.crt"
key "E:\\各種軟體\\百度雲盤\\openregist\\OpenVPN\\config\\dengwangbao.key"

# Verify server certificate by checking that the
# certicate has the correct key usage set.
# This is an important precaution to protect against
# a potential attack discussed here:
#  http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the keyUsage set to
#   digitalSignature, keyEncipherment
# and the extendedKeyUsage to
#   serverAuth
# EasyRSA can do this for you.
remote-cert-tls server


# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth "E:\\各種軟體\\百度雲盤\\openregist\\OpenVPN\\config\\ta.key" 1

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x


# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo


# Set log file verbosity.
verb 3


# Silence repeating messages

;mute 20

----------------------------------------------------------

備註:

  以上加大加粗部分為要修改的地方.

 2.其實公司給你配置證書的時候,會有一個client.conf的檔案,把字尾名改為ovpn,並把裡面加粗的部分改一下即可 ,雙擊圖片就可以啟動openvpn連線了.