jffs2檔案系統製作
阿新 • • 發佈：2019-01-02
U-Boot 2010.09-00000-g1a87d59 (Jun 01 2011 - 21:21:30)
Modified by guowenxue for s3c2440/s3c2410 board.
DRAM: 64 MiB
Flash: 1 MiB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Net: dm9000
Hit any key to stop autoboot: 0
[ [email protected] ]# run bkr
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 08:00:3e:26:0a:6b
could not establish link
operating at 100M full duplex mode
Using dm9000 device
TFTP from server 192.168.1.155; our IP address is 192.168.1.244
Filename 'uImage-s3c2440.gz'.
Load address: 0x30008000
Loading: T #################################################################
############################################################
done
Bytes transferred = 1828496 (1be690 hex)
NAND erase: device 0 offset 0x100000, size 0x300000
Erasing at 0x3e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x100000, size 0x300000
3145728 bytes written: OK
[
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 08:00:3e:26:0a:6b
could not establish link
operating at 100M full duplex mode
Using dm9000 device
TFTP from server 192.168.1.155; our IP address is 192.168.1.244
Filename 'rootfs.jffs2'.
Load address: 0x30800000
Loading: T #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################T ###########################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################################################T ######
done
Bytes transferred = 20971520 (1400000 hex)
NAND erase: device 0 offset 0x2e00000, size 0x1400000
Skipping bad block at 0x03340000
Erasing at 0x41e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x2e00000, size 0x1400000
Skip bad block 0x03340000
20971520 bytes written: OK
[
NAND read: device 0 offset 0x100000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 30008000 ...
Image Name: Linux Kernel
Created: 2011-05-25 12:19:50 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1828432 Bytes = 1.7 MiB
Load Address: 30008000
Entry Point: 30008040
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.................................................................................................................... done, booting the kernel.
Linux version 2.6.24 (
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
Machine: SMDK2440
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock5 rootfstype=jffs2 init=/linuxrc console=ttyS0,115200 mem=64M loglevel=7
irq: clearing pending ext status 00080000
irq: clearing subpending status 00000003
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00500000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57
Console: colour dummy device 80x30
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61068KB available (3336K code, 307K data, 132K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C2440: Clock Support, DVS off
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4800000, irq 33
DMA channel 1 at c4800040, irq 34
DMA channel 2 at c4800080, irq 35
DMA channel 3 at c48000c0, irq 36
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (extended precision)
Installing knfsd (copyright (C) 1996 [email protected]).
JFFS2 version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 30x40
fb0: s3c2410fb frame buffer device
s3c2440-uart.0: ttyS0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: ttyS1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: ttyS2 at MMIO 0x50008000 (irq = 76) is a S3C2440
RAMDISK driver initialized: 1 RAM disks of 16384K size 1024 blocksize
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
dm9000 Ethernet Driver
eth0: dm9000 at c485e300,c4860304 IRQ 51 MAC: 08:00:3e:26:0a:6b
Loading iSCSI transport class v2.0-724.
Driver 'sd' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 195 at 0x01860000
Bad eraseblock 410 at 0x03340000
Bad eraseblock 989 at 0x07ba0000
Bad eraseblock 1047 at 0x082e0000
Creating 9 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x00100000 : "mtdblock0 uboot 1MB"
0x00100000-0x00600000 : "mtdblock1 kernel 5MB"
0x00600000-0x01000000 : "mtdblock2 ramdisk 10MB"
0x01000000-0x01a00000 : "mtdblock3 cramfs 10MB"
0x01a00000-0x02e00000 : "mtdblock4 yaffs 20MB"
0x02e00000-0x04200000 : "mtdblock5 jffs 20MB"
0x04200000-0x05600000 : "mtdblock6 apps 20MB"
0x05600000-0x06a00000 : "mtdblock7 info 20MB"
0x06a00000-0x09200000 : "mtdblock8 data 40MB"
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
ASoC version 0.13.1
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 132K
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Copyright (C) 2011 GuoWenxue<[email protected]>
root login: root
Password:
>: ls
apps data etc lib mnt root sys usr
bin dev info linuxrc proc sbin tmp var
Modified by guowenxue for s3c2440/s3c2410 board.
DRAM: 64 MiB
Flash: 1 MiB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Net: dm9000
Hit any key to stop autoboot: 0
[ [email protected] ]# run bkr
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 08:00:3e:26:0a:6b
could not establish link
operating at 100M full duplex mode
Using dm9000 device
TFTP from server 192.168.1.155; our IP address is 192.168.1.244
Filename 'uImage-s3c2440.gz'.
Load address: 0x30008000
Loading: T #################################################################
############################################################
done
Bytes transferred = 1828496 (1be690 hex)
NAND erase: device 0 offset 0x100000, size 0x300000
Erasing at 0x3e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x100000, size 0x300000
3145728 bytes written: OK
[
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 08:00:3e:26:0a:6b
could not establish link
operating at 100M full duplex mode
Using dm9000 device
TFTP from server 192.168.1.155; our IP address is 192.168.1.244
Filename 'rootfs.jffs2'.
Load address: 0x30800000
Loading: T #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################T ###########################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################################################T ######
done
Bytes transferred = 20971520 (1400000 hex)
NAND erase: device 0 offset 0x2e00000, size 0x1400000
Skipping bad block at 0x03340000
Erasing at 0x41e0000 -- 100% complete.
OK
NAND write: device 0 offset 0x2e00000, size 0x1400000
Skip bad block 0x03340000
20971520 bytes written: OK
[
NAND read: device 0 offset 0x100000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 30008000 ...
Image Name: Linux Kernel
Created: 2011-05-25 12:19:50 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1828432 Bytes = 1.7 MiB
Load Address: 30008000
Entry Point: 30008040
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.................................................................................................................... done, booting the kernel.
Linux version 2.6.24 (
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
Machine: SMDK2440
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock5 rootfstype=jffs2 init=/linuxrc console=ttyS0,115200 mem=64M loglevel=7
irq: clearing pending ext status 00080000
irq: clearing subpending status 00000003
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00500000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57
Console: colour dummy device 80x30
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61068KB available (3336K code, 307K data, 132K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C2440: Clock Support, DVS off
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4800000, irq 33
DMA channel 1 at c4800040, irq 34
DMA channel 2 at c4800080, irq 35
DMA channel 3 at c48000c0, irq 36
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (extended precision)
Installing knfsd (copyright (C) 1996 [email protected]).
JFFS2 version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 30x40
fb0: s3c2410fb frame buffer device
s3c2440-uart.0: ttyS0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: ttyS1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: ttyS2 at MMIO 0x50008000 (irq = 76) is a S3C2440
RAMDISK driver initialized: 1 RAM disks of 16384K size 1024 blocksize
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
dm9000 Ethernet Driver
eth0: dm9000 at c485e300,c4860304 IRQ 51 MAC: 08:00:3e:26:0a:6b
Loading iSCSI transport class v2.0-724.
Driver 'sd' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 195 at 0x01860000
Bad eraseblock 410 at 0x03340000
Bad eraseblock 989 at 0x07ba0000
Bad eraseblock 1047 at 0x082e0000
Creating 9 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x00000000-0x00100000 : "mtdblock0 uboot 1MB"
0x00100000-0x00600000 : "mtdblock1 kernel 5MB"
0x00600000-0x01000000 : "mtdblock2 ramdisk 10MB"
0x01000000-0x01a00000 : "mtdblock3 cramfs 10MB"
0x01a00000-0x02e00000 : "mtdblock4 yaffs 20MB"
0x02e00000-0x04200000 : "mtdblock5 jffs 20MB"
0x04200000-0x05600000 : "mtdblock6 apps 20MB"
0x05600000-0x06a00000 : "mtdblock7 info 20MB"
0x06a00000-0x09200000 : "mtdblock8 data 40MB"
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
ASoC version 0.13.1
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 132K
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Copyright (C) 2011 GuoWenxue<[email protected]>
root login: root
Password:
>: ls
apps data etc lib mnt root sys usr
bin dev info linuxrc proc sbin tmp var