vivado模擬出錯: Please check the Tcl console or log files for more information.
解決方法: 這個問題根本原因是license檔案過期造成的。所以只需要將license檔案換成可用的license檔案就可以。注意:換掉之後一定要關機重啟才能用
2、點選左邊按鈕:Load License,得到如下圖:
3、點選Copy License按鈕,開啟你新下載的license檔案,並點選“確認”。
4、點選左側的View License Status按鈕,點選Refresh按鈕進行更新。
5、關機重啟電腦,重新執行vivado,然後模擬就可以啦。(新的license檔案在連結中下載) http://download.csdn.net/download/lanhuamanjianghong/10170314
相關推薦
vivado模擬出錯: Please check the Tcl console or log files for more information.
最後得出:最根本原因是電腦防火牆開啟,導致vivado的模擬出錯:開始右鍵->控制面板->系統和安全->Windows防火牆->啟動或關閉防火牆->我關閉了共用網路設定(沒關閉專用網路設定)->確認就可以啦(下文寫的都是換license
python安裝失敗提示“one or more issues caused the setup to fail . Please fix the issues and then retry setup.For more information see the log file”
ase ice body orm bubuko mat 解決方法 3.4 mage 換了項目組,換了新電腦,重裝Python時遇到提示如下圖所示: 原因:需要安裝Windows 7 Service Pack 1 直接點擊“update your
用友開發:啟動伺服器中介軟體時提示”Init datasource error [NC65] can not get connection,please check the DBSet”
問題:啟動伺服器中介軟體時提示”Init datasource error [NC65] can not get connection,please check the DBSet”,測試資料庫連線時,是可以連上的。 可能原因:刪除專案導致 解決方法:1)新建專案,重啟中介軟體伺服器,未解決
nagios配置pnp4nagios報錯“Please check the documentatio
lin blog object etc water 重啟 oss 添加 ges 報錯如圖 修改如下配置 /usr/local/nagios/etc/nagios.cfg配置文件 #修改值為1 process_performance_data=1 #取
git commit 時出現:please enter the commit message for your changes
每次準備提交前,先用 git status 看下,是不是都已暫存起來了,然後再執行提交命令 git commit: $ git commit 這種方式會啟動文字編輯器以便輸入本次提交的說明。(預設會啟用 shell 的環境變數 $EDITOR 所指定的軟體,一般
springboot2.x 與 elasticsearch2.4.x整合出錯:None of the configured nodes are available
升級springboot2.x出現如下Elasticsearch相關錯誤: NoNodeAvailableException[None of the configured nodes are available: [{#transport#-1}{729dgKKVSF-
please check the Erlang cookie
DIAGNOSTICS =========== attempted to contact: ['[email protected]'] [email protected]: * connected to epmd (port 4369) onSHOP
Could not stop Cortex-M device! please check the JTAG cable的解決辦法
cortex-m 發現 ont ima could not step tps detail img 今天程序燒錄後,進行調試時keil提示:Could not stop Cortex-M device! please check the JTAG cable 如圖
【已解決】執行Eclipse出錯:Failed toload the JNI shared library
【已解決】執行Eclipse出錯:Failed toload the JNI shared library 【問題】 執行Android的ADT,即Eclipse出錯: Failed to load the JNIshared library C:\Program File
kibana加訪問控制時報錯--Kibana did not load properly.Check the server output for more information. nginx使用者認證與htpasswd命令
錯誤 在使用kibana的時候,我們需要對可以進行日誌訪問進行控制,x-pack外掛是最好的選擇,但是kibana的x-pack外掛是收費的,我們本著節約資源的理念(公司的錢也是錢啊,哈哈),我決定使用nginx的訪問控制來進行使用者認證,在經過nginx使用者認證與htpasswd命令配置後,我們進行
postman Installation has failed: There was an error while installing the application. Check the setup log for more information and contact the author
Error msg: Installation has failed: There was an error while installing the application. Check the setup log for more information and contact the autho
mac系統docker釋出映象報錯:錯誤"the user name or passphrase you entered is not correct"解決
docker build映象完成後,釋出映象時提示許可權不足,使用命令docker login進行登入,輸入使用者名稱密碼後報錯:"the user name or passphrase you entered is not correct",嘗試過重灌docker、重設密碼均不奏效。 解決方法
執行Jmeter.bat出錯:Not able to find java executor or version. Please check your installation. errorlevel
本人從公司電腦拿的zip的jmeter包進行解壓配置好環境配置後,進行執行jmeter.bat輸出報錯 Not able to find java executor or version. Please check your installation. errorlevel 進行搜查以往前輩
git pull出錯fatal:Please make sure you have the correct access rights.and the repository exists.
初學liunx,真是坑爹很多了,每天的錯誤。。。 Warning: Permanently added the RSA host key for IP address ‘192.168.25.*’ to the list of known hosts. Pe
MyEclipse運行Java出錯:could not find the main class:test.program will exit(導入項目)
沒有 fin run lib could not sys program pil 編譯器 自己新建的項目運行沒有任何問題。但是我導入的很早以前別人寫的項目,然後run就會彈框could not find the main class:test.program will ex
POJ 2151 Check the difficulty of problems:概率dp【至少】
統計 () and res -s code courier max space 題目鏈接:http://poj.org/problem?id=2151 題意: 一次ACM比賽,有t支隊伍,比賽共m道題。 第i支隊伍做出第j道題的概率為p[i][j]. 問你所有隊
java出現以下警告:WARN No appenders;WARN Please initialize the log4j的處理方法
att 想去 log4j配置 gic bte log 沒有 prior 調整 編譯java或引用別的代碼時出現以下警告: log4j:WARN No appenders could be found for logger (org.apache.zookeeper.Zoo
SQL server 導出平面文件時出錯: The code page on Destination - 3_txt.Inputs[Flat File Destination Input].Columns[UserId] is 936 and is required to be 1252.
log 解決辦法 驗證 AI inpu image ans post BE 我在導出平面文件時:Error 0xc00470d4: Data Flow Task 1: The code page on Destination - 3_txt.Inputs[Flat File
【已解決】mac上appium報錯:“Could not find aapt Please set the ANDROID_HOME environment variable with the Android SDK root directory path”
resource sset root could not fun ror 環境 apt direct 按照網上教程配置完appium環境後,真機跑自動化過程,遇到如下報錯: appium報錯如下: [ADB] Checking whether aapt is present
[已解決]Xcode編譯項目最後失敗:Error: Jar file buglySymboliOS.jar was not found. Please copy the jar file into ~/bin folder
iphone prepare pre found inter step lib detail key Xcode去用Archive打包企業版app,在編譯的最後出錯: <div–<————————————————————– Copyright 2014-2015