在CISCO交換機上配置SSH
阿新 • • 發佈:2019-01-04
在Cisco路由器產品系列中只有7200系列、7500系列和12000系列(GSR)等高階產品的IOS支援SSH.一般支援SSH的IOS版本檔名中都帶有K3或者K4字樣,K3 代表56bit SSH 加密,K4代表168bit SSH加密。如我省省網GSR 12016和12008上用的IOS 就是一個支援56bit SSH 加密的版本。
目前Cisco的產品只支援SSH-1,還不支援SSH-2.下面以GSR 12008為例詳細介紹SSH-1的配置方法(斜體字為配置輸入的命令):
① 配置hostname和ip domain-name:
Router#configure terminal Router(config)#hostname TEST-GSR12008 TEST-GSR12008(config)#ip domain-name jx.cn.net |
② 配置登入使用者名稱和密碼(以本地認證為例):
TEST-GSR12008(config)#username test password 0 test 注:新增一個使用者:test,口令:test TEST-GSR12008(config)#line vty 0 4 TEST-GSR12008(config-line)#login local |
在這兩部分做完以後,用show run命令就能夠看到:
hostname TEST-GSR12008 ! boot system flash gsr-k3p-mz.120-14.S.bin enable secret 5 $1$DMyW$gdSIOkCr7p8ytwcRwtnJG. enable password 7 094F47C31A0A ! username test password 7 0835495D1D clock timezone PRC 16 redundancy main-cpu auto-sync startup-config ! ! ! ! ip subnet-zero no ip finger ip domain-name jx.cn.net ip name-server 202.101.224.68 ip name-server 202.101.226.68 ! |
③ 配置SSH服務:
TEST-GSR12008(config)#crypto key generate rsa The name for the keys will be: TEST-GSR12008.jx.cn.net 注:SSH的關鍵字名就是hostname + . +ip domain-name Choose the size of the key modulus in the range of 360 to 2048 for your General Purpose Keys. Choosing a key modulus greater than 512 may take a few minutes. How many bits in the modulus [512]: 注:選擇加密位數,用預設就行了 Generating RSA keys ... [OK] TEST-GSR12008(config)#end TEST-GSR12008#write Building configuration... |
這時候用show run命令可以看到:
ip subnet-zero no ip finger ip domain-name jx.cn.net ip name-server 202.101.224.68 ip name-server 202.101.226.68 ip ssh time-out 120 ip ssh authentication-retries 3 ! |
用命令show ip ssh也能看到:
SSH Enabled - version 1.5 Authentication timeout: 120 secs; Authentication retries: 3 |
現在SSH服務已經啟動,如果需要停止SSH服務,用以下命令:
TEST-GSR12008(config)#crypto key zeroize rsa |
④設定SSH引數
配置好了SSH之後,通過show run命令我們看到SSH預設的引數:超時限定為120秒,認證重試次數為3次,可以通過下面命令進行修改:
TEST-GSR12008(config)#ip ssh {[time-out seconds]} | [authentication-retries interger]} |
如果要把超時限定改為180秒,則應該用:
TEST-GSR12008(config)# ip ssh time-out 180 |
如果要把重試次數改成5次,則應該用:
TEST-GSR12008(config)# ip ssh authentication-retries 5 |
這樣,SSH已經在路由器上配置成功了,就能夠通過SSH進行安全登入了