uboot 之 lds檔案詳解
阿新 • • 發佈:2019-01-08
OUTPUT_FORMAT("elf32­littlearm", "elf32­littlearm", "elf32­littlearm")
;指定輸出可執行檔案是elf格式,32位ARM指令,小端
OUTPUT_ARCH(arm)
;指定輸出可執行檔案的平臺為ARM
ENTRY(_start)
;指定輸出可執行檔案的起始程式碼段為_start.
SECTIONS
{
. = 0x00000000 ; 定位當前地址為0地址
. = ALIGN(4) ; 程式碼以4位元組對齊
.text : ;指定程式碼段
{
cpu/arm920t/start.o (.text) ; 程式碼的第一個程式碼部分
*(.text) ;其它程式碼部分
}
. = ALIGN(4)
.rodata : { *(.rodata) } ;指定只讀資料段
. = ALIGN(4);
.data : { *(.data) } ;指定讀/寫資料段
. = ALIGN(4);
.got : { *(.got) } ;指定got段, got段式是uboot自定義的一個段, 非標準段
__u_boot_cmd_start = . ;把__u_boot_cmd_start賦值為當前位置, 即起始位置
.u_boot_cmd : { *(.u_boot_cmd) } ;指定u_boot_cmd段, uboot把所有的uboot命令放在該段.
__u_boot_cmd_end = . ;把__u_boot_cmd_end賦值為當前位置,即結束位置
. = ALIGN(4);
__bss_start = . ; 把__bss_start賦值為當前位置,即bss段的開始位置
.bss : { *(.bss) } ; 指定bss段
_end = . ; 把_end賦值為當前位置,即bss段的結束位置
}
;指定輸出可執行檔案是elf格式,32位ARM指令,小端
OUTPUT_ARCH(arm)
;指定輸出可執行檔案的平臺為ARM
ENTRY(_start)
;指定輸出可執行檔案的起始程式碼段為_start.
SECTIONS
{
. = 0x00000000 ; 定位當前地址為0地址
. = ALIGN(4) ; 程式碼以4位元組對齊
.text : ;指定程式碼段
{
cpu/arm920t/start.o (.text) ; 程式碼的第一個程式碼部分
*(.text) ;其它程式碼部分
}
. = ALIGN(4)
.rodata : { *(.rodata) } ;指定只讀資料段
. = ALIGN(4);
.data : { *(.data) } ;指定讀/寫資料段
. = ALIGN(4);
.got : { *(.got) } ;指定got段, got段式是uboot自定義的一個段, 非標準段
__u_boot_cmd_start = . ;把__u_boot_cmd_start賦值為當前位置, 即起始位置
.u_boot_cmd : { *(.u_boot_cmd) } ;指定u_boot_cmd段, uboot把所有的uboot命令放在該段.
__u_boot_cmd_end = . ;把__u_boot_cmd_end賦值為當前位置,即結束位置
. = ALIGN(4);
__bss_start = . ; 把__bss_start賦值為當前位置,即bss段的開始位置
.bss : { *(.bss) } ; 指定bss段
_end = . ; 把_end賦值為當前位置,即bss段的結束位置
}