使用EF操作資料必須設定主鍵
Unable to update the EntitySet 'UserType' because it has a DefiningQuery and no <InsertFunction> ele
資料庫沒有主鍵
【1】新增主鍵
【2】在edmx中更新
相關推薦
使用EF操作資料必須設定主鍵
Unable to update the EntitySet 'UserType' because it has a DefiningQuery and no <InsertFunction> ele 資料庫沒有主鍵 【1】新增主鍵 【2】在edmx中更新
mysql修改表結構 MySQL修改表結構操作命令總結 MySql資料庫在表中新增新欄位,設定主鍵,設定外來鍵,欄位移動位置,以及修改資料庫後如何進行部署和維護的總結 mysql 如何修改、新增、刪除表主鍵
MySQL修改表結構操作命令總結 以下內容轉自:http://www.jb51.net/article/58079.htm 表的結構如下: 複製程式碼程式碼如下:
大量資料併發的情況下 ,不用自增列 怎樣設定主鍵
在平時的專案開發中,我相信有很大一批人都在用這個資料庫自增ID,用資料庫自增ID有利也有弊。 優點:節省時間,根本不用考慮怎麼來標識唯一記錄,寫程式也簡單了,資料庫幫我們維護著這一批ID號。 缺點:for example, 在做分散式資料庫時,要求資料同步時,這種自增ID就會
EF之Code First設定主外來鍵關係(一)
指定類外來鍵有註釋(DataAnnotation)和FluentAPI兩種方式,下面我們主要使用DataAnnotation指定外來鍵關係 第一種方式 //1-指定導航屬性,會自動生成外來鍵,命
SQL中的每一張表都必須設有主鍵嗎
說明 class 行數 資源 合並 ESS 有意義 主鍵 鏈接 問題描述:公司的數據庫表有時候會看到沒有主鍵的,SQL中的每一張表都必須設有主鍵嗎? 主鍵的作用: 1)保證實體的完整性; 2)加快數據庫的操作速度; 3)在表中添加新記錄時,數據庫ACCESS會自動檢
postgresql 表不設定主鍵問題
由於多系統整合,需要將當前系統的資料庫表格修改為檢視的形式對映其他系統的表格。在做這項工作時需要匯入資料和修改資料在這個過程中我發現了一個大坑,其他系統表格居然都沒有主鍵。 (postgresql 使用pgadmin不能修改無主鍵的表資料,navicat 在批量複製資料時,也
批量修改資料 要根據主鍵Id 批量修改欄位Value的值 且 value 的值是不一樣。
批量修改資料 要根據主鍵Id 批量修改欄位Value的值 且 value 的值是不一樣。 UPDATE gold_chip set chip_money_win=(case when chip_id = 1 then 1  
postgresql設定主鍵為自增序列
postgresql設定主鍵為自增序列 對於才開始建表時,使用以下語句 create table test ( id serial PRIMARY KEY, name character varying(128) ); 對於已經建立的表: 1)CREATE
MYSQL插入資料後返回主鍵
最近做專案,要求不能使用mybatis等框架,所以一切資料庫訪問操作都是用原生的JDBC。 用過mybatis的都知道,插入新資料後可以直接返回主鍵的值,但是使用JDBC不行,於是上網搜了一下,找到一個還蠻好用的方法: SELECT LAST_INSERT_ID();
在Oracle中設定主鍵自增
轉自:https://www.2cto.com/database/201705/636725.html 資料庫設定主鍵自增">oracle資料庫設定主鍵自增: 1 --建立表 2 create table blog( 3 id integer primary key, 4 title
Oracle 設定主鍵自增長__Oracle
轉自:https://yq.aliyun.com/ziliao/258074 如果想在Oracle資料庫裡實現資料表主鍵自增,我們似乎沒有辦法像MySql般直接定義列的屬性來實現。不過對於這個資料庫的常用功能,我們還是有辦法實現的。這裡將展示使用觸發器來實現主鍵自增。 1.準備 建立UserIn
Solr6.1.0設定主鍵uuid的方法
上一次介紹設定collocation的主鍵為uuid,只是為了索引檔案使用,那麼今天也有朋友加群說如果只用來做主鍵來記錄日誌等資料的時候,該如何配置呢?其實也是很簡單的。一、在solrconfig.xml中新增兩段配置1.在以下程式碼:<requestHandler name="/updauuidte/
新增一條新資料並返回此資料的ID(主鍵)
新增資料後返回Id <insert id="" parameterType="" useGeneratedKeys="true" keyProperty="id" keyColumn="id"> useGeneratedKeys:必須設定為true,否
Mybatis_插入資料後返回主鍵ID_返回資料欄位與類中欄位相對應
目的:利用mapper 向資料庫中插入記錄,並返回主鍵ID 注意返回資料的名字需要與類中欄位相對應上 若不對應上會出現以下錯誤: JavaBean XXXMapper.xml中的SQL 正
【MYSQL筆記2】複製表,在已有表的基礎上設定主鍵,insert和replace
之前我自己建立好了一個數據庫xscj;表xs是已經定義好的 具體的定義資料型別如下: 為了複製表xs,我們新建一個表名為xstext,使用下列語句進行復制xs,或者說是備份都可以; create table xstext as select * from x create ta
MySql資料庫在表中新增新欄位,設定主鍵,設定外來鍵,欄位移動位置,以及修改資料庫後如何進行部署和維護的總結
1,為當前已有的表新增新的欄位 alter table student add studentName varchar(20) not null; 2,為當前已有的表中的欄位設定為主鍵自增 alter table student add constraint PK_studentId primaryKe
Mybatis 插入資料時返回主鍵的方法
mysql插入資料後獲得主鍵 針對自增主鍵的表,在插入時不需要主鍵,而是在插入過程自動獲取一個自增的主鍵,比如MySQL, <insert id="add" parameterType="vo.Category" useGeneratedKeys="t
mybatis 資料插入返回主鍵與多執行緒執行產生的錯誤
今天在碼程式碼時,發現一個錯誤,有時正常有時不正常,完全沒有一個程式該有的節操。在一翻調教下正常了。現留下解決方法備用。 以下原理純屬個人臆測,完全沒有依據,誤導完全不負責任~ 另請明白的大神評論裡解釋,脆謝~ 目標描述: 我需要一次並行執行多個執行緒,使用Cyclic
Oracle 在插入資料後獲取主鍵ID的解決辦法
Mybatis批量插入返回自增主鍵: 對於支援生成自增主鍵的資料庫:useGenerateKeys和keyProperty 不支援生成自增主鍵的資料庫:<selectKey> 1、Oracle資料庫中建立自增序列 create sequence ARCHI
資料庫:ORACLE設定主鍵自動遞增
建立表STUDENT 假設主鍵為ID一、先設定遞增: 設定遞增需要建立序列,在plsql找到sequence,右鍵點選新建 名稱隨便起一個 這裡為s_student. 其他的數字如圖二、建立觸發器 sql: