ubuntu學習1——window通過ssh連線ubuntu
一、ubuntu:
確保已經安裝了ssh,命令如下
sudo apt-get install openssh-server
選擇“y”
接著輸入
sudo /etc/init.d/ssh start
二、window下安裝putty
在紅色方框中輸入ubuntu的ip地址
點選“open”彈出命令輸入框,輸入ubuntu的使用者名稱和密碼,出現下面這個表示已經使用ssh連線ubuntu成功,可以進行在ubuntu終端的命令一切操作
相關推薦
ubuntu學習1——window通過ssh連線ubuntu
一、ubuntu: 確保已經安裝了ssh,命令如下 sudo apt-get install openssh-server 選擇“y” 接著輸入 sudo /etc/init.d/ssh start 二、window下安裝putty 在紅色方框中輸入ubuntu的
用secureCRT通過SSH連線你的Linux(本文基於Ubuntu 10.04)
相信現在有很多學習或者工作需要使用或者是用VPS主機的Linux的人吧..單純的工作學習可以直接硬碟上安裝一個比較適合的Linux系統,但是我們大多時候可能還是需要工作在Windows的平臺下(很多情況也是無奈啊),所以虛擬機器就成了我們使用Linux的最佳選擇。 這是又出
window用ssh連線本機虛擬機器中的ubuntu
主機和虛擬機器間通訊,需將2臺機器的IP地址設為同一網段。 1、設定虛擬機器: 虛擬機器–> 設定–> Hardware –> Network Adapter,在網路連線處設定為 “橋接:直接連線到物理網路”,“NAT:使用已共享的主機IP地址”處打勾。 其實在第一步中,哪一步中設為橋
通過 xshell 連線 ubuntu on windows(WSL)
原文: 通過 xshell 連線 ubuntu on windows(WSL) 裝上 ubuntu on windows 後,預設要先開啟 cmd, 再執行 bash 進入 ubuntu 的 shell。 但是這個shell很難看,配色不好就算了,還存在各種複製貼上麻煩、預設沒進入 h
ubuntu建立使用者以及使用ssh連線docker
sudo useradd -d /home/caoping -m -s /bin/bash cp sudo passwd cp(然後輸入自己使用者的密碼) sudo gpasswd -a cp docker 這樣一個cp使用者就建立成功 然後建立新的連線,設定如
影象與機器學習-1-梯度下降法與ubuntu
現值研一,進入了飛行器控制實驗室,在我迷茫不知學什麼的時候,這時候劉洋師兄帶著影象識別與跟蹤這個課題來到了我們面前,師兄傾其所有交給我們學習的方法和步驟與資料,第一節課,師兄給我們講解了影象識別與跟蹤以及機器學習或深度學習的應用和前景以及基本框架和概念。可以說帶領我進入了影象與機器學習的第一步。
不能ssh連線ubuntu linux 伺服器 secureCRT不能ssh連線伺服器 不能遠端ssh連線虛擬機器的ubuntu linux
我是用的是secureCRT,遠端連線我的虛擬機器裡面的ubuntu 直接報錯,連線不上 1,先分別在windows上ipconfig和ubuntu上ifconfig下 互ping一下,是可以ping通的 2,ubuntu上ssh localhost 發現時沒有ssh服務 3.執行命令
ssh連線ubuntu虛擬機器
在mac中通過parallels線上下載ubuntu安裝之後,通過已建立的使用者登入進系統切換到root卻發現root密碼不對,應該做如下設定: 1、先用安裝時候的使用者登入進入系統 2、輸入:su
Aamazon Web Service EC2 Ubuntu 新建使用者並且用ssh連線host
本文參照 http://docs.aws.amazon.com/zh_cn/AWSEC2/latest/UserGuide/managing-users.html http://docs.aws.amazon.com/zh_cn/AWSEC2/latest/UserGuid
ssh連線Ubuntu伺服器遇到的問題彙總
Step-1: 在遠端伺服器上,啟動jupyter notebooks服務: jupyter notebook --no-browser --port=88891 Step-2: 在本地機器的Terminal中啟動SSH: ssh -N -f -L localh
在Window下遠端連線Ubuntu中的Hbase
遇到問題歸總 ** ** 一、Java I/O報錯,window上沒有處理hadoop的工具包。 ** ** java.io.IOException: Could not locate executable null\bin\winutils.e
開啟Mac自帶的sshd,通過ssh連線mac
#轉載的http://blog.csdn.net/cwj649956781/article/details/37913637 mac本身安裝了ssh服務,預設情況下不會開機自啟 1.啟動sshd服務: sudo launchctl load -w /System/Library/La
Mac通過ssh連線centos
通過ifconfig檢視虛擬機器ip地址eth1的192.168.56.168 (在mac終端中ping這個ip地址,確認是否連通 在mac中輸入 ssh [email protected] 提示輸入密碼 完成
【Linux】使用Xshell通過ssh連線linux出現Connection closed by foreign host.提示
一般我們都會使用crt或xshell通過ssh協議去連線Linux伺服器進行操作,最近遇到了一個問題,在通過xshell連線linux伺服器過程中出現Connection closed by foreign host.中文:外部主機關閉連線好吧,雖然知道中文意思,但是感覺毫無卵用。隨後使
【常見問題1】通過遠端連線進行本地Windows和遠端裝置的檔案拷貝
工作中遇到的問題,之前一直是直接從伺服器直接拖入拖出,今天發現tools沒法正常使用,就找到此方法:從遠端裝置(伺服器)上拷貝檔案到本地Windows。 遠端連線一臺裝置,無法拷貝檔案到本地的解決方法: 在連線之前點選左下方顯示選項 之後出現介面,選擇本地資源選項
埠轉發:通過ssh連線家中路由器下的linux,通過mstsc連線家中路由器下的windows(一種teamviewer的替代方案)
實現原理 本質就是轉發訊息:兩個tcp連線,將一個tcp連線中讀到的訊息不經過任何處理直接寫到另一個tcp連線。 家裡的電腦先和公網電腦建立tcp連線,然後將公網上(ip, port)收到的訊息轉發到家中電腦的某埠上 通過mstsc遠端桌面連線
Jmeter配置通過SSH連線的mysql資料庫
jmeter連線配置mysql資料庫時,如果資料庫伺服器沒有通過ssh連線,則只需要新增配置相應的jdbc引數就可以了。如果資料庫伺服器是通過SSH連線的,則需要通過中間遠端連線工具來登入,此處使用的遠端連線工具為Putty,具體的配置請參考如下: 1、首先,下載並開啟Putty,在Putty Config
win10系統怎麼通過ssh連線到本機virtual box中安裝的centos7系統
1.設定virtualbox中centos網路為NAT: 2.設定埠轉發規則, 3.執行cmd >>>ifconfig,檢視本機virtualbox的ip, 乙太網介面卡 Vir
Python通過ssh連線MySQL
機器A 通過機器B 登入機器C的MySQL import pymysql from sshtunnel import SSHTunnelForwarder server = SSHTunnelForwarder(  
樹莓派CM3筆記:2、CM3通過SSH連線
1、需要配件 一根從電腦城買的最便宜的USB轉網口的線35元,當然還有15快的。 2、配置樹莓派SSH 由於現在的樹莓派都預設關閉SSH了,所以還得先開啟。 2.1 跳線 必須搞成這樣,必須短接USB