Qt 之 HTTP 上傳/下載
阿新 • • 發佈:2019-02-10
簡述
在前面章節中我們講述了關於Qt顯示網路圖片的內容,比較簡單,因為圖片一般都比較小,下載到本地速度比較快,所以基本不需要什麼特殊處理,本節我們主要針對HTTP實現上傳/下載進行詳細的講解與分享,包括:使用者認證,實時獲取下載大小、速度、剩餘時間資訊等。
首先看一下即將用到的公式:
檔案剩餘大小 = 檔案總大小 - 檔案已下載大小
平均速度 = 檔案已下載大小 / 檔案已下載大小所用的時間
瞬時速度 = 每秒下載的檔案大小
剩餘時間 = 檔案剩餘大小 / 瞬時速度
下面以下載為例,來實現一個檔案下載管理器。
|
效果
QNetworkAccessManager
DownloadNetworkManager::DownloadNetworkManager(QObject *parent )
: QNetworkAccessManager(parent)
{
// 獲取當前的時間戳,設定下載的臨時檔名稱
QDateTime dateTime = QDateTime::currentDateTime();
QString date = dateTime.toString("yyyy-MM-dd-hh-mm-ss-zzz");
m_strFileName = QString("E:/%1.tmp").arg(date);
connect(this, SIGNAL(finished(QNetworkReply *)), this, SLOT(replyFinished(QNetworkReply *) ));
}
DownloadNetworkManager::~DownloadNetworkManager()
{
// 終止下載
if (m_pReply != NULL)
{
m_pReply->abort();
m_pReply->deleteLater();
}
}
// 設定URL及訊息頭,開始請求
void DownloadNetworkManager::execute()
{
m_url = QUrl("http://192.168.*.*/download/2.0.0.zip");
QNetworkRequest request;
request.setUrl(m_url);
request.setHeader(QNetworkRequest::ContentTypeHeader, "application/zip" );
connect(this, SIGNAL(authenticationRequired(QNetworkReply *, QAuthenticator *)), this, SLOT(onAuthenticationRequest(QNetworkReply *, QAuthenticator *)));
m_pReply = get(request);
connect(m_pReply, SIGNAL(downloadProgress(qint64, qint64)), this, SIGNAL(downloadProgress(qint64, qint64)));
connect(m_pReply, SIGNAL(readyRead()), this, SLOT(readyRead()));
}
void DownloadNetworkManager::replyFinished(QNetworkReply *reply)
{
// 獲取響應的資訊,狀態碼為200表示正常
QVariant statusCode = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute);
// 無錯誤返回
if (reply->error() == QNetworkReply::NoError)
{
// 重新命名臨時檔案
QFileInfo fileInfo(m_strFileName);
QFileInfo newFileInfo = fileInfo.absolutePath() + m_url.fileName();
QDir dir;
if (dir.exists(fileInfo.absolutePath()))
{
if (newFileInfo.exists())
newFileInfo.dir().remove(newFileInfo.fileName());
QFile::rename(m_strFileName, newFileInfo.absoluteFilePath());
}
}
else
{
QString strError = reply->errorString();
qDebug() << "Error:" << strError;
}
emit replyFinished(statusCode.toInt());
}
// 使用者認證
void DownloadNetworkManager::onAuthenticationRequest(QNetworkReply *reply, QAuthenticator *authenticator)
{
QByteArray password;
password.append("123456");
password = QByteArray::fromBase64(password);
QString strPassword(password);
authenticator->setUser("wang");
authenticator->setPassword(strPassword);
}
// 本地寫檔案
void DownloadNetworkManager::readyRead()
{
QFileInfo fileInfo(m_strFileName);
QFileInfo newFileInfo = fileInfo.absolutePath() + m_url.fileName();
QString strFileName = newFileInfo.absoluteFilePath();
emit fileName(strFileName);
// 寫檔案-形式為追加
QFile file(m_strFileName);
if (file.open(QIODevice::Append))
file.write(m_pReply->readAll());
file.close();
}
使用
呼叫download()介面開始下載,關聯downloadProgress訊號和槽,可以實時獲取下載大小、速度、剩餘時間等資訊。
// 開始下載
void MainWindow::download()
{
if (m_pNetworkManager == NULL)
{
m_pNetworkManager = new DownloadNetworkManager(this);
connect(m_pNetworkManager, SIGNAL(downloadProgress(qint64, qint64)), this, SLOT(downloadProgress(qint64, qint64)), Qt::QueuedConnection);
connect(m_pNetworkManager, SIGNAL(replyFinished(int)), this, SLOT(replyFinished(int)), Qt::QueuedConnection);
connect(m_pNetworkManager, SIGNAL(fileName(QString)), m_pFileInfoLabel, SLOT(setText(QString)), Qt::QueuedConnection);
}
m_pNetworkManager->execute();
downloadTime.start();
}
// 計算下載大小、速度、剩餘時間
void MainWindow::downloadProgress(qint64 bytesReceived, qint64 bytesTotal)
{
// 總時間
int nTime = downloadTime.elapsed();
// 本次下載所用時間
nTime -= m_nTime;
// 下載速度
double dBytesSpeed = (bytesReceived * 1000.0) / nTime;
double dSpeed = dBytesSpeed;
//剩餘時間
qint64 leftBytes = (bytesTotal - bytesReceived);
double dLeftTime = (leftBytes * 1.0) / dBytesSpeed;
m_pSpeedInfoLabel->setText(speed(dSpeed));
m_pLeftTimeInfoLabel->setText(timeFormat(qCeil(dLeftTime)));
m_pFileSizeInfoLabel->setText(size(bytesTotal));
m_pDownloadInfoLabel->setText(size(bytesReceived));
m_pProgressBar->setMaximum(bytesTotal);
m_pProgressBar->setValue(bytesReceived);
// 獲取上一次的時間
m_nTime = nTime;
}
// 下載完成
void MainWindow::replyFinished(int statusCode)
{
m_nStatusCode = statusCode;
QString strStatus = (statusCode == 200) ? QStringLiteral("下載成功") : QStringLiteral("下載失敗");
m_pStatusLabel->setText(strStatus);
}
轉換
下面是一些資料的格式轉換,包括:位元組轉KB、MB、GB,速度轉KB/S、MB/S、GB/S,秒轉*d *h *m *s格式。
// 位元組轉KB、MB、GB
QString size(qint64 bytes)
{
QString strUnit;
double dSize = bytes * 1.0;
if (dSize <= 0)
{
dSize = 0.0;
}
else if (dSize < 1024)
{
strUnit = "Bytes";
}
else if (dSize < 1024 * 1024)
{
dSize /= 1024;
strUnit = "KB";
}
else if (dSize < 1024 * 1024 * 1024)
{
dSize /= (1024 * 1024);
strUnit = "MB";
}
else
{
dSize /= (1024 * 1024 * 1024);
strUnit = "GB";
}
return QString("%1 %2").arg(QString::number(dSize, 'f', 2)).arg(strUnit);
}
// 速度轉KB/S、MB/S、GB/S
QString speed(double speed)
{
QString strUnit;
if (speed <= 0)
{
speed = 0;
strUnit = "Bytes/S";
}
else if (speed < 1024)
{
strUnit = "Bytes/S";
}
else if (speed < 1024 * 1024)
{
speed /= 1024;
strUnit = "KB/S";
}
else if (speed < 1024 * 1024 * 1024)
{
speed /= (1024 * 1024);
strUnit = "MB/S";
}
else
{
speed /= (1024 * 1024 * 1024);
strUnit = "GB/S";
}
QString strSpeed = QString::number(speed, 'f', 2);
return QString("%1 %2").arg(strSpeed).arg(strUnit);
}
// 秒轉*d *h *m *s
QString timeFormat(int seconds)
{
QString strValue;
QString strSpacing(" ");
if (seconds <= 0)
{
strValue = QString("%1s").arg(0);
}
else if (seconds < 60)
{
strValue = QString("%1s").arg(seconds);
}
else if (seconds < 60 * 60)
{
int nMinute = seconds / 60;
int nSecond = seconds - nMinute * 60;
strValue = QString("%1m").arg(nMinute);
if (nSecond > 0)
strValue += strSpacing + QString("%1s").arg(nSecond);
}
else if (seconds < 60 * 60 * 24)
{
int nHour = seconds / (60 * 60);
int nMinute = (seconds - nHour * 60 * 60) / 60;
int nSecond = seconds - nHour * 60 * 60 - nMinute * 60;
strValue = QString("%1h").arg(nHour);
if (nMinute > 0)
strValue += strSpacing + QString("%1m").arg(nMinute);
if (nSecond > 0)
strValue += strSpacing + QString("%1s").arg(nSecond);
}
else
{
int nDay = seconds / (60 * 60 * 24);
int nHour = (seconds - nDay * 60 * 60 * 24) / (60 * 60);
int nMinute = (seconds - nDay * 60 * 60 * 24 - nHour * 60 * 60) / 60;
int nSecond = seconds - nDay * 60 * 60 * 24 - nHour * 60 * 60 - nMinute * 60;
strValue = QString("%1d").arg(nDay);
if (nHour > 0)
strValue += strSpacing + QString("%1h").arg(nHour);
if (nMinute > 0)
strValue += strSpacing + QString("%1m").arg(nMinute);
if (nSecond > 0)
strValue += strSpacing + QString("%1s").arg(nSecond);
}
return strValue;
}
總結
一般來說,我們下載檔案到本地,需要設定一個臨時檔名,這裡我以時間戳為名稱外加.tmp來命名,當然更嚴格的最好再加上隨機數,這樣基本就不會出現重名情況。
下載時,首先判斷本地檔案中是否存在與下載檔案同名的檔案,如果有則刪除,開始下載。當下載完成時,需要對臨時檔案重新命名。
以上內容比較詳細,介紹瞭如何進行使用者認證,如何實時獲取下載大小、速度、剩餘時間等資訊,後面我們會針對斷點續傳來進行詳細講解,敬請期待!