目錄

• 7、Excel資料讀取
  • 7.1、讀取配置檔案
  • 7.1、編寫Excel操作類
• 8、用例組裝
• 9、用例執行結果校驗
• 10、執行用例
• 11 、小結

上一篇：Python3簡易介面自動化測試框架設計與實現（上）

7、Excel資料讀取

用例是放在Excel中的，用xlrd來讀取資料，寫資料需要用到xluntils，先安裝：

pip install xlrd

pip install xluntils

7.1、讀取配置檔案

讀取Excel資料，我們需要知道對應的行和列，列相對固定，在配置檔案settings中定義，然後讀取，行作為引數傳入。conf/settings檔案中的定義如下：

[excel]
case_no=0
case_name=1
is_run=2
case_level=3
case_header=4
case_cookies=5
req_type=6
case_url=7
case_body=8
expect_result=9
operator=10
actual_result=11
test_result=12

在unitls/load_conf.py中編寫讀取配置的方法，獲取各項列值的方法。lood_conf()函式需要傳入兩個引數：配置項字串識別符號，配置項型別。比如要讀取excel下整數case_url：lood_conf("excel.case_url","int")。class excel_config()下定義返回各項列值的方法。

完整程式碼如下：

import  configparser

'''
read conf from setting.conf
@:parameter:identstr,value_type
value_type:"int" or "str"
'''
def lood_conf(identstr,value_type):
    cf = configparser.ConfigParser()
    cf.read("../config/settings.conf")

    idenlist = identstr.split('.')

    if value_type == "int":
        try:
         value = cf.getint(idenlist[0],idenlist[1])
         return  value
        except (configparser.NoSectionError ,configparser.NoOptionError) as e:
            print(e)
    if value_type == "str":
        try:
            value = cf.get(idenlist[0],idenlist[1])
            return value
        except (configparser.NoSectionError ,configparser.NoOptionError) as e:
            print(e)

'''
獲取url，request body等的列號
'''
class excel_config():
    #獲取用例編號的列
    def caseno_col(self):
        return lood_conf("excel.case_no","int")

    def casename_col(self):
        return lood_conf("excel.case_name","int")

    def isrun_col(self):
        #print(lood_conf("excel.is_run","int"))
        return lood_conf("excel.is_run","int")

    def level_col(self):
        return lood_conf("excel.case_level","int")

    def header_col(self):
        return lood_conf("excel.case_header","int")

    def cookies_col(self):
        return lood_conf("excel.case_cookies","int")

    def reqtype_col(self):
        return lood_conf("excel.req_type","int")

    def caseurl_col(self):
        return lood_conf("excel.case_url","int")

    def casebody_col(self):
        return lood_conf("excel.case_body","int")

    def expectresult_col(self):
        return lood_conf("excel.expect_result","int")

    def actualresult_col(self):
        return lood_conf("excel.actual_result","int")

    def testresult_col(self):
        return lood_conf("excel.test_result","int")

    def test_operator_col(self):
        return lood_conf("excel.operator","int")
 

7.1、編寫Excel操作類

unitls/excel_tool.py中定義了獲取用例編號，用例名稱等方法，需要傳入行。回寫測試結果，回寫實際結果方法需要傳入兩個引數：行，值。完整程式碼如下：

#coding:utf-8
import xlrd
from untils.log_trace import *
from xlutils.copy import copy
from untils.load_conf import excel_config

class excel_tool():

    def __init__(self,excel_name):

        self.curr_excel = xlrd.open_workbook(excel_name)
        self.table = self.curr_excel.sheet_by_index(0)
        #print(self.table.cell(1,1).value)
        #例項化excel_config
        self.config = excel_config()
        self.rows = self.table.nrows
        self.excel_name = excel_name


    #獲取用例編號
    def get_caseno(self,row):
        caseno = self.table.cell(row,self.config.caseno_col()).value
        if caseno:
            return caseno
        else:
            logging.info("case no is null")
            return None

    #獲取用例名稱
    def get_casename(self,row):
        casename = self.table.cell(row,self.config.casename_col()).value
        return casename

    #獲取是否執行標誌
    def get_runflag(self,row):
        run_flag = self.table.cell(row,self.config.isrun_col()).value
        return run_flag

    #獲取用例級別
    def get_caselevel(self,row):
        caselevel = self.table.cell(row,self.config.level_col()).value
        return caselevel

    #獲取請求url
    def get_caseurl(self,row):
        caseurl = self.table.cell(row,self.config.caseurl_col()).value
        return caseurl

    #獲取請求body
    def get_casebody(self,row):
        case_body = self.table.cell(row,self.config.casebody_col()).value
        return case_body

    #獲取header
    def get_headerflag(self,row):
        headerflag = self.table.cell(row,self.config.header_col()).value
        return headerflag

    #獲取coocikes
    def get_cookiesflag(self,row):
        cookiesflag = self.table.cell(row,self.config.cookies_col()).value
        return cookiesflag

    #獲取請求型別
    def get_methodtype(self,row):
        method_type = self.table.cell(row,self.config.reqtype_col()).value
        return method_type
    #獲取預期結果
    def get_expectres(self,row):
        expect_res = self.table.cell(row,self.config.expectresult_col()).value
        return expect_res

    #獲取測試結果
    def get_testres(self,row):
        test_res= self.table.cell(row,self.config.testresult_col()).value
        return test_res
    #獲取操作符
    def get_operator(self,row):
        operator = self.table.cell(row,self.config.test_operator_col()).value
        return operator

    #回寫測試結果到excel
    def write_testres(self,row,value):
        wbook = copy(xlrd.open_workbook(self.excel_name))
        sheet = wbook.get_sheet(0)
        sheet.write(row, self.config.testresult_col(), value)
        wbook.save(self.excel_name)
    #回寫實際結果
    def write_actualres(self,row,value):
        wbook = copy(xlrd.open_workbook(self.excel_name))
        sheet = wbook.get_sheet(0)
        sheet.write(row, self.config.actualresult_col(), value)
        wbook.save(self.excel_name)

8、用例組裝

有了Excel操作類，就可以方便讀取資料和回填結果了。接下來，在unitls/run_main.py中來組裝用例。組裝之前，先獲取是否執行的標誌：

• 執行標誌為N，不組裝，將用例標記為skiiped，回填測試結果到Excel檔案中。
• 執行標誌為Y，開始組裝用例並執行，並對比預期結果和實際結果。
• 用例執行通過，將用例標記為pass，回填測試結果和實際結果，實際結果為介面的返回。
• 用例執行失敗，將用例標記為failed，回填測試結果和實際結果。

介面鑑權需要用到的headers，先在run_main.py 中寫死，這個問題後面解決，在上面的過程中，增加必要的日誌，方便定位問題和檢視用例的執行日誌。完整程式碼如下：

#coding:utf-8
from untils.excel_tool import excel_tool
from untils.send_request import send_request
from untils.log_trace import *
from untils.check_result import CheckResult
import  json
headers = {
    "X-Token":"0a6db4e59c7fff2b2b94a297e2e5632e"
}

class runner():
    def __init__(self):
        self.excel = excel_tool("../testcase/test.xls")
        self.check = CheckResult()

    def join_case(self):
        global  skip_list,sucess_list,failed_list,skip_list
        sucess_list = []
        sucess_list = []
        failed_list = []
        skip_list = []

        for row in range(1,self.excel.rows):
            no = self.excel.get_caseno(row)
            url = self.excel.get_caseurl(row)
            isrun = self.excel.get_runflag(row)
            name = self.excel.get_casename(row)
            level = self.excel.get_caselevel(row)
            data = self.excel.get_casebody(row)
            expect_res = self.excel.get_expectres(row)
            method = self.excel.get_methodtype(row)
            hasheader = self.excel.get_headerflag(row)
            operator = self.excel.get_operator(row)

            if isrun == "Y":
                logging.info("Begin to run test case : %s,case number :%s" %(name,no))
                logging.info("Request method type is :%s" %method)
                logging.info("Request URL:%s" %url)
                logging.info("Request Body:%s" %json.dumps(json.loads(data),sort_keys=True,indent=2))
                res = send_request(method,url,data=data,headers=headers)


                is_sucess = self.check.cmpdict(eval(expect_res),eval(res.text),operator)
                print(is_sucess)
                if is_sucess:
                    sucess_list.append(name)
                    #回寫測試結果
                    self.excel.write_testres(row,"pass")
                    #回寫實際結果
                    self.excel.write_actualres(row,res.text)
                    logging.info("Test case %s run sucess." %name)
                else:
                    failed_list.append(name)
                    print("fail",is_sucess)
                    #回寫測試結果
                    self.excel.write_testres(row,"failed")
                    #回寫實際結果
                    self.excel.write_actualres(row,res.text)
                    logging.error("Test case %s run fail." %name)

                logging.info("Response is:%s" %json.dumps(res.json(),sort_keys=True,indent=2))

            else:
                skip_list.append(name)
                self.excel.write_testres(row,"skipped")

    def sum(self):

        total = len(sucess_list)+len(failed_list) + len(skip_list)
        failed = len(failed_list)
        sucess = len(sucess_list)

        logging.info("-----------------------------------------------------------")
        logging.info("本次一共執行：%s 個用例" %total)
        logging.info("本次執行通過：%s 個用例" %sucess)
        logging.info("本次執行跳過：%s 個用例" %len(skip_list))
        logging.info("跳過的用例：%s" %skip_list)
        logging.info("-----------------------------------------------------------")

9、用例執行結果校驗

在untils/run_main.py中方法cmpdict()是用來校驗預期和結果實際結果是否匹配，需要傳入三個引數：預期結果字典，實際結果字典，操作符。在check_result.py中編寫校驗用例結果的方法。目前只支援兩種操作符，equal和notequal，預期結果為字典，其中不能巢狀字典。和完整程式碼如下：

from untils.log_trace import *
class  CheckResult():
    def dict_value(self,key,actual):
        try:
            if key in actual:
                return actual[key]
            else:
                for keys in actual:

                    return self.dict_value(key,actual[keys])
        except Exception as e:
            logging.error(e)
            return None

    def cmpdict(self,expect,actual,equal):
        logging.info("Begin to check result of  testcase.")
        is_dict = isinstance(expect,dict) and isinstance(actual,dict)
        if is_dict:
            if equal == "equal":
                for key in expect.keys():
                    if expect[key] == self.dict_value(key,actual):
                        logging.info("%s is equal to %s" %(expect[key],self.dict_value(key,actual)))
                        return True
                    else:
                        logging.error("%s is not equal to %s" %(expect[key],self.dict_value(key,actual)))
                        return False

            if equal == "notequal":
                for key in expect.keys():
                    if key != self.dict_value(key,actual):
                        logging.info("%s is not equal to %s" %(expect[key],self.dict_value(key,actual)))
                        return True
                    else:
                        logging.error("%s is equal to %s" %(expect[key],self.dict_value(key,actual)))
                        return False

            else:
                logging.error("Operator :%s is not support now,you can define it in file[check_result.py]" %equal)


        else:
            logging.error("Expect or actual  result is not dict,check it in  excel. ")

10、執行用例

新建一個名稱為test.xls的Excel，將其放到testcase路徑下，並在Excel中編寫測試用例。介面開發請參考：使用Django開發簡單介面：文章增刪改查，我準備的用例如下：

在untils/untils_test.py中匯入run_mian模組來測試一下：

from untils.run_main import runner
if __name__ == "__main__":
    #test_send_request()
    runner = runner()
    runner.join_case()
    runner.sum()

執行untils_test.py，然後去到Excel中檢視執行結果：

report路徑下檢視測試用例執行日誌，如下所示：

Sat, 11 May 2019 19:37:56 INFO check_result.py [line:16]  Begin to check result of  testcase.
Sat, 11 May 2019 19:37:56 ERROR check_result.py [line:38]  Operator :e1qual is not support now,you can define it in file[check_result.py]
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:37]  Begin to run test case : 查詢文章,case number :1.0
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:38]  Request method type is :GET
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:39]  Request URL:http://127.0.0.1:9000/articles
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:40]  Request Body:{}
Sat, 11 May 2019 19:37:56 INFO send_request.py [line:25]  {'X-Token': '0a6db4e59c7fff2b2b94a297e2e5632e'}
Sat, 11 May 2019 19:37:56 INFO check_result.py [line:16]  Begin to check result of  testcase.
Sat, 11 May 2019 19:37:56 INFO check_result.py [line:22]  BS.200 is equal to BS.200
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:52]  Test case 查詢文章 run sucess.
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:62]  Response is:{
  "all_titles": {
    "Hello": "alive",
    "amy1": "alive",
    "modifytest": "alive",
    "useasge of ddt": "alive"
  },
  "msg": "query articles sucess.",
  "status": "BS.200"
}
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:37]  Begin to run test case : 新增文章,case number :2.0
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:38]  Request method type is :POST
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:39]  Request URL:http://127.0.0.1:9000/articles/
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:40]  Request Body:{
  "content": "useasge of ddt",
  "title": "useasge of ddt"
}
Sat, 11 May 2019 19:37:56 INFO send_request.py [line:25]  {'X-Token': '0a6db4e59c7fff2b2b94a297e2e5632e'}
Sat, 11 May 2019 19:37:56 INFO check_result.py [line:16]  Begin to check result of  testcase.
Sat, 11 May 2019 19:37:56 ERROR check_result.py [line:25]  BS.200 is not equal to BS.400
Sat, 11 May 2019 19:37:56 ERROR run_main.py [line:60]  Test case 新增文章 run fail.
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:62]  Response is:{
  "msg": "title aleady exist,fail to publish.",
  "status": "BS.400"
}
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:37]  Begin to run test case : 修改文章,case number :3.0
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:38]  Request method type is :POST
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:39]  Request URL:http://127.0.0.1:9000/articles/7
Sat, 11 May 2019 19:37:56 INFO run_main.py [line:40]  Request Body:{
  "content": "modify test",
  "title": "modify test"
}
Sat, 11 May 2019 19:37:56 INFO send_request.py [line:25]  {'X-Token': '0a6db4e59c7fff2b2b94a297e2e5632e'}
Sat, 11 May 2019 19:37:57 INFO check_result.py [line:16]  Begin to check result of  testcase.
Sat, 11 May 2019 19:37:57 ERROR check_result.py [line:25]  BS.200 is not equal to BS.300
Sat, 11 May 2019 19:37:57 ERROR run_main.py [line:60]  Test case 修改文章 run fail.
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:62]  Response is:{
  "msg": "article is not exists,fail to modify.",
  "status": "BS.300"
}
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:37]  Begin to run test case : 刪除文章,case number :4.0
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:38]  Request method type is :DELETE
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:39]  Request URL:http://127.0.0.1:9000/articles/7
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:40]  Request Body:{}
Sat, 11 May 2019 19:37:57 INFO send_request.py [line:25]  {'X-Token': '0a6db4e59c7fff2b2b94a297e2e5632e'}
Sat, 11 May 2019 19:37:57 INFO check_result.py [line:16]  Begin to check result of  testcase.
Sat, 11 May 2019 19:37:57 ERROR check_result.py [line:25]  BS.200 is not equal to BS.300
Sat, 11 May 2019 19:37:57 ERROR run_main.py [line:60]  Test case 刪除文章 run fail.
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:62]  Response is:{
  "msg": "article is not exists,fail to delete.",
  "status": "BS.300"
}
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:74]  -----------------------------------------------------------
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:75]  本次一共執行：5 個用例
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:76]  本次執行通過：1 個用例
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:77]  本次執行跳過：1 個用例
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:78]  跳過的用例：['新增文章缺少title']
Sat, 11 May 2019 19:37:57 INFO run_main.py [line:79]  -----------------------------------------------------------

11 、小結

框架終於能跑起來了，但是遺留的問題還很多。

• 很多地方的程式碼不夠健壯，這個後面慢慢優化。還有用例校驗支援的運算子比較少。
• 傳送郵件模組待完成。
• Headers的問題如何解決？
• 如果請求的body比較多，寫在Excel是不是很不美觀呀？這個可以從固定地方讀取檔案來完成。
• Excel中測試用例有沒有必填項呀？這個可以在執行結果之前進行校驗，必填項缺少，不執行。
• 最關鍵的一點，如果第二個用例依賴於第一個用例的返回，用例依賴一直是個痛點，下一篇解決。
• 還有很多問題比如，重試機制，耗時的用例設定超時時間，超時預設為失敗等等.......

作者：秦無殤

轉載請說明出處：https://www.cnblogs.com/webDepOfQWS/，謝謝合