前言

繼上篇Windows搭建 jmeter + ant +jenkins實現後，那麼我們平時一般都是整合在linux伺服器上。

所以這次我們來Linux下搭建jmeter + ant +jenkins，廢話不多說，走起！！！

一、環境準備

1、jdk1.8以上：

jdk安裝教程詳細參考(docker安裝jenkins的小夥伴請忽略此步驟)：linux下安裝jdk：https://www.cnblogs.com/gsxl/p/12128768.html

或者yum安裝：yum install java-1.8.0-openjdk.x86_64

2、jmeter：

所有版本：https://archive.apache.org/dist/jmeter/binaries/

本篇直接點選此連結下載：https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.3.tgz 下載後上傳至linux直接解壓，或者wget下載

wget 下載：

wget https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.3.tgz

注意Linux字尾為.zip，如：apache-jmeter-5.3.tgz

解壓：tar -xvf apache-jmeter-5.3.tgz

[root@iZbp19lugf22zbsubsf1y6Z jmeter-ant]# tar
 
 -xvf apache-jmeter-5.3.tgz 
apache-jmeter-5.3/
apache-jmeter-5.3/LICENSE
apache-jmeter-5.3/NOTICE

3、ant：

所有版本：https://downloads.apache.org/ant/binaries/

本篇直接點選此連結下載：https://downloads.apache.org/ant/binaries/apache-ant-1.9.15-bin.tar.gz 下載後直接解壓：

注意Windows字尾為.zip，如：apache-ant-1.9.15-bin.tar.gz

設定環境變數：

①將bin、lib目錄新增至環境變數中的系統變數path即可，如下圖我的解壓路徑：

編輯，命令：vi /etc/profile

複製以下新增儲存退出後，輸入：source /etc/profile

# ANT_HOME
ANT_HOME=/root/jmeter-ant/apache-ant-1.9.15
export PATH=$PATH:$ANT_HOME/bin
export PATH=$PATH:$ANT_HOME/lib

輸入命令驗證版本：ant -version

二、jmeter、ant各種配置

1、jmeter配置：

①將jmeter目錄bin\jmeter.properties的490行-528行改為如下：

注意：是jmeter.properties檔案，在490-528行中，凡是有jmeter開頭的且有#號都需要去掉，或者直接複製下面替換490-528行；

jmeter.save.saveservice.output_format=xml

# The below properties are true when field should be saved; false otherwise
#
# assertion_results_failure_message only affects CSV output
jmeter.save.saveservice.assertion_results_failure_message=true
#
# legitimate values: none, first, all
jmeter.save.saveservice.assertion_results=true
#
jmeter.save.saveservice.data_type=true
jmeter.save.saveservice.label=true
jmeter.save.saveservice.response_code=true
# response_data is not currently supported for CSV output
jmeter.save.saveservice.response_data=true
# Save ResponseData for failed samples
jmeter.save.saveservice.response_data.on_error=true
jmeter.save.saveservice.response_message=true
jmeter.save.saveservice.successful=true
jmeter.save.saveservice.thread_name=true
jmeter.save.saveservice.time=true
jmeter.save.saveservice.subresults=true
jmeter.save.saveservice.assertions=true
jmeter.save.saveservice.latency=true
# Only available with HttpClient4
jmeter.save.saveservice.connect_time=true
jmeter.save.saveservice.samplerData=true
jmeter.save.saveservice.responseHeaders=true
jmeter.save.saveservice.requestHeaders=true
jmeter.save.saveservice.encoding=true
jmeter.save.saveservice.bytes=true
# Only available with HttpClient4
jmeter.save.saveservice.sent_bytes=true
jmeter.save.saveservice.url=true
jmeter.save.saveservice.filename=true
jmeter.save.saveservice.hostname=true
jmeter.save.saveservice.thread_counts=true
jmeter.save.saveservice.sample_count=true
jmeter.save.saveservice.idle_time=true

更改完成後，我是ftp上傳(或者vi編輯)：

2、ant 配置

①將apache-jmeter-5.3\extras目錄下的：ant-jmeter-1.1.1.jar 複製到apache-ant-1.9.15\lib\

命令：cp 檔案路徑 複製到哪檔案路徑

[root@iZbp19lugf22zbsubsf1y6Z apache-jmeter-5.3]# cp extras/ant-jmeter-1.1.1.jar ../apache-ant-1.9.15/lib/ant-jmeter-1.1.1.jar
[root@iZbp19lugf22zbsubsf1y6Z apache-jmeter-5.3]# 

②建立以下目錄檔案(網盤下載的不需要再新建了)：

推薦直接網盤下載完整資料夾，連結：https://pan.baidu.com/s/1dKy6GpHFDMBIYK0qQixdiA 提取碼：gsxl

③編輯build.xml：(vi編輯或者在自己Windows電腦編輯好再上傳)

將你的（1）-（5）都改為自己的路徑，儲存：

三、執行ant run

1、在目錄下執行：ant

[root@iZbp19lugf22zbsubsf1y6Z standard-catalog]# ant
Buildfile: /root/jmeter-ant/standard-catalog/build.xml
  [taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.

run:
  [taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.

test:
   [jmeter] Executing test plan: /root/jmeter-ant/standard-catalog/xxx-business.jmx ==> /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl
   [jmeter] Creating summariser <summary>
   [jmeter] Created the tree successfully using /root/jmeter-ant/standard-catalog/xxx-business.jmx
   [jmeter] Starting standalone test @ Fri Sep 18 23:26:06 CST 2020 (1600442766325)
   [jmeter] Waiting for possible Shutdown/StopTestNow/HeapDump/ThreadDump message on port 4445
   [jmeter] summary =      9 in 00:00:01 =    7.4/s Avg:    92 Min:    12 Max:   659 Err:     0 (0.00%)
   [jmeter] Tidying up ...    @ Fri Sep 18 23:26:08 CST 2020 (1600442768253)
   [jmeter] ... end of run
   [jmeter] Executing test plan: /root/jmeter-ant/standard-catalog/xxx-shopping.jmx ==> /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl
   [jmeter] Creating summariser <summary>
   [jmeter] Created the tree successfully using /root/jmeter-ant/standard-catalog/xxx-shopping.jmx
   [jmeter] Starting standalone test @ Fri Sep 18 23:26:10 CST 2020 (1600442770591)
   [jmeter] Waiting for possible Shutdown/StopTestNow/HeapDump/ThreadDump message on port 4445
   [jmeter] summary =      6 in 00:00:01 =    4.3/s Avg:   175 Min:    19 Max:   784 Err:     0 (0.00%)
   [jmeter] Tidying up ...    @ Fri Sep 18 23:26:12 CST 2020 (1600442772678)
   [jmeter] ... end of run
  [taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.

report:
     [xslt] Processing /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl to /root/jmeter-ant/standard-catalog/html/InterfaceReport.html
     [xslt] Loading stylesheet /root/jmeter-ant/standard-catalog/xsl/jmeter.results.shanhe.me.xsl
     [copy] Copying 2 files to /root/jmeter-ant/standard-catalog/html

BUILD SUCCESSFUL
Total time: 10 seconds

2、html目錄下：檢視報告

利用：anywhere生成外網可訪問

anywhere安裝請參考：https://www.cnblogs.com/gsxl/p/13193939.html 第二大點，標題：二、 node.js +Anywhere + html

[root@iZbp19lugf22zbsubsf1y6Z standard-catalog]# cd html/
[root@iZbp19lugf22zbsubsf1y6Z html]# anywhere -p 8055
Running at http://xxx.16.xx.2xx:8055/
Also running at https://xxx.16.1xx.2xx:8056/

歡迎來大家QQ交流群一起學習：482713805