三、Jsp(一)
阿新 • • 發佈:2020-10-14
一、實驗目的
對 Python 呼叫 OpenDaylight 的 REST API 方法有初步瞭解。
二、實驗任務
本實驗需要用另一種方法完成上一個實驗相同的功能,即通過 Python 程式呼叫OpenDaylight 的北向介面下發關於硬超時的流表,實現拓撲內主機在一定時間內的網路通斷。實驗拓撲如下:
三、實驗步驟
1. 實驗環境
安裝了 Ubuntu 16.04.3 Desktop amd64 的虛擬機器。
2. 實驗過程
(1)生成拓撲
sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13
(2)編寫 Python 程式碼和 JSON 格式的請求內容
nano odlnorth.py
python程式碼:
#!/usr/bin/python import requests from requests.auth import HTTPBasicAuth def http_put(url,jstr): url= url headers = {'Content-Type':'application/json'} resp = requests.put(url,jstr,headers=headers,auth=HTTPBasicAuth('admin', 'admin')) return resp if __name__ == "__main__": url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1' with open('hardtimeout.json') as f: jstr = f.read() resp= http_put(url,jstr) print resp.content
由於是下發流表,因此需要有 http 請求的具體內容,同之前的 Postman 一樣,也是以 JSON 格式來表示。
編輯 hardtimeout.json 檔案:
nano hardtimeout.json
檔案中不包含 http 請求的 url 地址,程式碼如下:
{ "flow":[ { "id":"1", "match":{ "in-port":"1", "ethernet-match": { "ethernet-type": { "type": "0x0800" } }, "ipv4-destination": "10.0.0.3/32" }, "instructions": { "instruction": [ { "order": "0", "apply-actions": { "action": [ { "order": "0", "drop-action": {} } ] } } ] }, "flow-name": "flow1", "priority": "65535", "hard-timeout": "10", "cookie": "2", "table_id": "0" } ] }
(3)執行 Python 程式碼,完成流表下發
python odlnorth.py
結果驗證如下:
四、實驗心得
遇到:
解決:檢查程式碼,odlnorth.py中"flownode-inventory"應改為"flow-node-inventory"。