iOS實現九宮格連線手勢解鎖
阿新 • • 發佈:2020-04-20
本文例項為大家分享了iOS實現九宮格連線手勢解鎖的具體程式碼,供大家參考,具體內容如下
Demo下載地址:手勢解鎖
效果圖:
核心程式碼:
// // ClockView.m // 手勢解鎖 // // Created by llkj on 2017/8/24. // Copyright © 2017年 LayneCheung. All rights reserved. // #import "ClockView.h" @interface ClockView () //存放當前選中的按鈕 @property (nonatomic,strong) NSMutableArray *selectBtnArry; //當前手指所在點 @property (nonatomic,assign) CGPoint curP; @end @implementation ClockView - (void)awakeFromNib{ [super awakeFromNib]; //初始化 [self setUp]; } - (NSMutableArray *)selectBtnArry{ if (_selectBtnArry == nil) { _selectBtnArry = [NSMutableArray array]; } return _selectBtnArry; } - (void)setUp{ for (int i = 0; i < 9; i ++) { //建立按鈕 UIButton *btn = [UIButton buttonWithType:UIButtonTypeCustom]; btn.tag = i; btn.userInteractionEnabled = NO; [btn setImage:[UIImage imageNamed:@"gesture_node_normal"] forState:UIControlStateNormal]; [btn setImage:[UIImage imageNamed:@"gesture_node_selected"] forState:UIControlStateSelected]; [self addSubview:btn]; } } //獲取當前點 - (CGPoint)getCurrentPoint:(NSSet *)point{ UITouch *touch = [point anyObject]; return [touch locationInView:self]; } //返回按鈕 - (UIButton *)btnRectContainsPoint:(CGPoint)point{ //遍歷brn判斷當前點在不在btn上 for (UIButton *btn in self.subviews) { if (CGRectContainsPoint(btn.frame,point)) { return btn; } } return nil; } - (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{ //1.獲取當前點 CGPoint curP = [self getCurrentPoint:touches]; //2.判斷當前點在不在btn上 UIButton *btn = [self btnRectContainsPoint:curP]; if (btn && btn.selected == NO) { btn.selected = YES; //儲存選中的按鈕 [self.selectBtnArry addObject:btn]; } } - (void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{ //1.獲取當前點 CGPoint curP = [self getCurrentPoint:touches]; self.curP = curP; //2.判斷當前點在不在btn上 UIButton *btn = [self btnRectContainsPoint:curP]; if (btn && btn.selected == NO) { btn.selected = YES; //儲存選中的按鈕 [self.selectBtnArry addObject:btn]; } //重繪 [self setNeedsDisplay]; } - (void)touchesEnded:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{ NSMutableString *str = [NSMutableString string]; //1.取消所有選中的按鈕 for (UIButton *btn in self.selectBtnArry) { btn.selected = NO; [str appendFormat:@"%ld",btn.tag]; } //2.清空路徑 [self.selectBtnArry removeAllObjects]; [self setNeedsDisplay]; //檢視是否是第一次設定密碼 NSString *keyPwd = [[NSUserDefaults standardUserDefaults] objectForKey:@"keyPwd"]; if (!keyPwd) { [[NSUserDefaults standardUserDefaults] setObject:str forKey:@"keyPwd"]; [[NSUserDefaults standardUserDefaults] synchronize]; UIAlertView *alertV = [[UIAlertView alloc] initWithTitle:@"第一次設定密碼成功" message:nil delegate:nil cancelButtonTitle:@"確定" otherButtonTitles:nil,nil]; [alertV show]; NSLog(@"第一次輸入密碼"); }else{ if ([keyPwd isEqualToString:str]) { NSLog(@"密碼正確"); UIAlertView *alertV = [[UIAlertView alloc] initWithTitle:@"手勢輸入正確" message:nil delegate:nil cancelButtonTitle:@"確定" otherButtonTitles:nil,nil]; [alertV show]; }else{ NSLog(@"密碼錯誤"); UIAlertView *alertV = [[UIAlertView alloc] initWithTitle:@"手勢輸入錯誤" message:nil delegate:nil cancelButtonTitle:@"確定" otherButtonTitles:nil,nil]; [alertV show]; } } //3.檢視當前選中按鈕的順序 NSLog(@"選中按鈕順序為:%@",str); } - (void)drawRect:(CGRect)rect{ if (self.selectBtnArry.count) { //1.建立路徑 UIBezierPath *path = [UIBezierPath bezierPath]; //2.取出所有儲存的按鈕 for (int i = 0; i < self.selectBtnArry.count; i ++) { UIButton *btn = self.selectBtnArry[i]; //當前按鈕是不是第一個按鈕 if (i == 0) { //設定成路徑的起點 [path moveToPoint:btn.center]; } else { //新增一根線到按鈕中心 [path addLineToPoint:btn.center]; } } //新增一根線到當前手指所在點 [path addLineToPoint:self.curP]; //設定線寬/顏色 [path setLineWidth:5]; [[UIColor whiteColor] set]; [path setLineJoinStyle:kCGLineJoinRound]; //3.繪製路徑 [path stroke]; } } - (void)layoutSubviews{ [super layoutSubviews]; CGFloat x = 0; CGFloat y = 0; CGFloat btnWH = 75; int column = 3; int margin = (self.bounds.size.width - (column * btnWH)) / (column + 1); int currentColumn = 0; int currentRow = 0; for (int i = 0; i < self.subviews.count; i ++) { // 求當前所在的列 currentColumn = i % column; // 求當前所在的行 currentRow = i / column; x = margin + (btnWH + margin) * currentColumn; y = margin + (btnWH + margin) * currentRow; UIButton *btn = self.subviews[i]; btn.frame = CGRectMake(x,y,btnWH,btnWH); } } @end
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支援我們。