高通QMI協議

阿新 • • 發佈：2017-11-03

int 網絡訪問 imu 以太網 location lock merge message gen

QMI(Qualcomm MSM Interface,官方名稱應該是Qualcomm Message Interface)是高通用來替代OneRPC/DM的協議，用來與modem通信。

QMI協議定義了多個服務： DMS(設備管理Device Management) 提供載入設備信息的功能 NAS(網絡訪問Network Access)提供歐冠你註冊網絡的動作 WDS(數據連接) PDS(GPS定位報告) UIM(管理User Identity Module) CTL(控制服務：用戶發起其他服務請求前，必須先申請 ClientID, 這個ID就是由控制服務分配的, 這個服務永遠在線)

協議裏的每個服務都定義了請求和響應（也叫做 Indication) 每個請求響應都有一個匹配的ID，這樣用戶可以一次發出多個請求。並且響應也不必嚴格按照請求的順序進行回應。

Indication作為主動提供的消息，要麽發送給某個特定的客戶端, 要麽是廣播消息（廣播給所有使用這個服務的客戶)。通常情況下，用戶需要通過一些請求/響應來打開indication

協議中的每條消息都定義了一系列輸入（在請求中才有輸入）參數，或者輸出（在響應或者indications中才有輸出)參數。這些參數，我們命名為TLV

QMI協議可以通過Linux kernels (>= 3.4)來訪問。載入cdc-wdm和qmi_wwan之後即可

$ lsmod
...
qmi_wwan               20971  0
cdc_wdm                17427  1 qmi_wwan
...
usbnet                 30844  3 rndis_host,qmi_wwan,cdc_ether
usbcore               195340  14 rndis_host,rt2x00usb,usb_storage,rt2800usb,ehci_hcd,ehci_pci,qmi_wwan,usbhid,usbnet,cdc_wdm,xhci_hcd,cdc_ether

https://packages.debian.org/sid/libqmi-glib1 (/usr/lib/x86_64-linux-gnu/libqmi-glib.so.1) https://packages.debian.org/jessie/libqmi-utils (/usr/bin/qmi-network) (/usr/bin/qmicli) https://packages.debian.org/sid/libqmi-glib-dev

設置適當的usb模式

# setprop sys.usb.config diag,serial_smd,serial_tty,rmnet_bam,mass_storage,adb

在PC上可以看到

$ ls -la /dev/cdc*
crw------- 1 root root 180, 0 10月 12 20:29 /dev/cdc-wdm0

演示

# qmicli -d /dev/cdc-wdm0 --dms-get-revision
[/dev/cdc-wdm0] Device revision retrieved:
	Revision: ‘M8626A-AAAANAZM-1.1.00759  1  [Dec 31 2013 03:00:00]‘



# qmicli -d /dev/cdc-wdm0 --dms-uim-get-imsi
[/dev/cdc-wdm0] UIM IMSI retrieved:
	IMSI: ‘204043154974997‘



# qmicli -d /dev/cdc-wdm0 --dms-uim-get-iccid
[/dev/cdc-wdm0] UIM ICCID retrieved:
	ICCID: ‘89860313100205205744‘


# qmicli -d /dev/cdc-wdm0 --dms-get-capabilities
[/dev/cdc-wdm0] Device capabilities retrieved:
	Max TX channel rate: ‘1800000‘
	Max RX channel rate: ‘3100000‘
	       Data Service: ‘non-simultaneous-cs-ps‘
	                SIM: ‘supported‘
	           Networks: ‘cdma20001x, evdo, gsm‘


# qmicli -d /dev/cdc-wdm0 --dms-get-ids
[/dev/cdc-wdm0] Device IDs retrieved:
	 ESN: ‘C33BA980‘
	IMEI: ‘355991020927480‘
	MEID: ‘A1000051CA0BE1‘


# qmicli -d /dev/cdc-wdm0 --dms-get-band-capabilities
[/dev/cdc-wdm0] Device band capabilities retrieved:
	Bands: ‘bc-0-a-system, bc-0-b-system, gsm-dcs-1800, gsm-900-extended, gsm-850, gsm-pcs-1900‘
	LTE bands: ‘(null)‘




v# qmicli -d /dev/cdc-wdm0 --nas-get-system-selection-preference
[/dev/cdc-wdm0] Successfully got system selection preference
	Emergency mode: ‘no‘
	Mode preference: ‘cdma-1x, cdma-1xevdo, gsm‘
	Band preference: ‘bc-0-a-system, bc-0-b-system, bc-1-all-blocks, bc-2, bc-3-a-system, bc-4-all-blocks, bc-5-all-blocks, gsm-dcs-1800, gsm-900-extended, gsm-900-primary, bc-6, bc-7, bc-8, bc-9, bc-10, bc-11, gsm-450, gsm-480, gsm-750, gsm-850, gsm-900-railways, gsm-pcs-1900, wcdma-2100, wcdma-pcs-1900, wcdma-dcs-1800, wcdma-1700-us, wcdma-850-us, wcdma-800, bc-12, bc-14, wcdma-2600, wcdma-900, wcdma-1700-japan, bc-16, bc-17, bc-18, bc-19‘
	LTE band preference: ‘(null)‘
	TD-SCDMA band preference: ‘a, b, c, d, e, f‘
	CDMA PRL preference: ‘any‘
	Roaming preference: ‘any‘
	Network selection preference: ‘automatic‘
	Service domain preference: ‘cs-ps‘
	Service selection preference: ‘wcdma‘

代碼 http://cgit.freedesktop.org/libqmi

詳細調試信息

v# qmicli -d /dev/cdc-wdm0 -v  --dms-get-ids
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Opening device with flags ‘none‘...
[12 10月 2014, 20:55:31] [Debug] QMI Device at ‘/dev/cdc-wdm0‘ ready
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Assuming service ‘dms‘ is supported...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Allocating new client ID...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<<   length = 16
<<<<<<   data   = 01:0F:00:00:00:00:00:01:22:00:04:00:01:01:00:02

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<<   length  = 15
<<<<<<   flags   = 0x00
<<<<<<   service = "ctl"
<<<<<<   client  = 0
<<<<<< QMI:
<<<<<<   flags       = "none"
<<<<<<   transaction = 1
<<<<<<   tlv_length  = 4
<<<<<<   message     = "Allocate CID" (0x0022)
<<<<<< TLV:
<<<<<<   type       = "Service" (0x01)
<<<<<<   length     = 1
<<<<<<   value      = 02
<<<<<<   translated = dms

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>>   length = 24
>>>>>>   data   = 01:17:00:80:00:00:01:01:22:00:0C:00:02:04:00:00:00:00:00:01:02:00:02:03

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message (translated)...
>>>>>> QMUX:
>>>>>>   length  = 23
>>>>>>   flags   = 0x80
>>>>>>   service = "ctl"
>>>>>>   client  = 0
>>>>>> QMI:
>>>>>>   flags       = "response"
>>>>>>   transaction = 1
>>>>>>   tlv_length  = 12
>>>>>>   message     = "Allocate CID" (0x0022)
>>>>>> TLV:
>>>>>>   type       = "Result" (0x02)
>>>>>>   length     = 4
>>>>>>   value      = 00:00:00:00
>>>>>>   translated = SUCCESS
>>>>>> TLV:
>>>>>>   type       = "Allocation Info" (0x01)
>>>>>>   length     = 2
>>>>>>   value      = 02:03
>>>>>>   translated = [ service = ‘dms‘ cid = ‘3‘ ]

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Registered ‘dms‘ (version unknown) client with ID ‘3‘
[12 10月 2014, 20:55:31] [Debug] Asynchronously getting IDs...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<<   length = 13
<<<<<<   data   = 01:0C:00:00:02:03:00:01:00:25:00:00:00

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<<   length  = 12
<<<<<<   flags   = 0x00
<<<<<<   service = "dms"
<<<<<<   client  = 3
<<<<<< QMI:
<<<<<<   flags       = "none"
<<<<<<   transaction = 1
<<<<<<   tlv_length  = 0
<<<<<<   message     = "Get IDs" (0x0025)

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>>   length = 66
>>>>>>   data   = 01:41:00:80:02:03:02:01:00:25:00:35:00:02:04:00:00:00:00:00:12:0E:00:41:31:30:30:30:30:35:31:43:41:30:42:45:31:10:08:00:43:33:33:42:41:39:38:30:11:0F:00:33:35:35:39:39:31:30:32:30:39:32:37:34:38:30

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message (translated)...
>>>>>> QMUX:
>>>>>>   length  = 65
>>>>>>   flags   = 0x80
>>>>>>   service = "dms"
>>>>>>   client  = 3
>>>>>> QMI:
>>>>>>   flags       = "response"
>>>>>>   transaction = 1
>>>>>>   tlv_length  = 53
>>>>>>   message     = "Get IDs" (0x0025)
>>>>>> TLV:
>>>>>>   type       = "Result" (0x02)
>>>>>>   length     = 4
>>>>>>   value      = 00:00:00:00
>>>>>>   translated = SUCCESS
>>>>>> TLV:
>>>>>>   type       = "Meid" (0x12)
>>>>>>   length     = 14
>>>>>>   value      = 41:31:30:30:30:30:35:31:43:41:30:42:45:31
>>>>>>   translated = A1000051CA0BE1
>>>>>> TLV:
>>>>>>   type       = "Esn" (0x10)
>>>>>>   length     = 8
>>>>>>   value      = 43:33:33:42:41:39:38:30
>>>>>>   translated = C33BA980
>>>>>> TLV:
>>>>>>   type       = "Imei" (0x11)
>>>>>>   length     = 15
>>>>>>   value      = 33:35:35:39:39:31:30:32:30:39:32:37:34:38:30
>>>>>>   translated = 355991020927480

[/dev/cdc-wdm0] Device IDs retrieved:
	 ESN: ‘C33BA980‘
	IMEI: ‘355991020927480‘
	MEID: ‘A1000051CA0BE1‘
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Releasing ‘dms‘ client with flags ‘release-cid‘...
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Unregistered ‘dms‘ client with ID ‘3‘
[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message...
<<<<<< RAW:
<<<<<<   length = 17
<<<<<<   data   = 01:10:00:00:00:00:00:02:23:00:05:00:01:02:00:02:03

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Sent message (translated)...
<<<<<< QMUX:
<<<<<<   length  = 16
<<<<<<   flags   = 0x00
<<<<<<   service = "ctl"
<<<<<<   client  = 0
<<<<<< QMI:
<<<<<<   flags       = "none"
<<<<<<   transaction = 2
<<<<<<   tlv_length  = 5
<<<<<<   message     = "Release CID" (0x0023)
<<<<<< TLV:
<<<<<<   type       = "Release Info" (0x01)
<<<<<<   length     = 2
<<<<<<   value      = 02:03
<<<<<<   translated = [ service = ‘dms‘ cid = ‘3‘ ]

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message...
>>>>>> RAW:
>>>>>>   length = 24
>>>>>>   data   = 01:17:00:80:00:00:01:02:23:00:0C:00:02:04:00:00:00:00:00:01:02:00:02:03

[12 10月 2014, 20:55:31] [Debug] [/dev/cdc-wdm0] Received message (translated)...
>>>>>> QMUX:
>>>>>>   length  = 23
>>>>>>   flags   = 0x80
>>>>>>   service = "ctl"
>>>>>>   client  = 0
>>>>>> QMI:
>>>>>>   flags       = "response"
>>>>>>   transaction = 2
>>>>>>   tlv_length  = 12
>>>>>>   message     = "Release CID" (0x0023)
>>>>>> TLV:
>>>>>>   type       = "Result" (0x02)
>>>>>>   length     = 4
>>>>>>   value      = 00:00:00:00
>>>>>>   translated = SUCCESS
>>>>>> TLV:
>>>>>>   type       = "Release Info" (0x01)
>>>>>>   length     = 2
>>>>>>   value      = 02:03
>>>>>>   translated = [ service = ‘dms‘ cid = ‘3‘ ]

[12 10月 2014, 20:55:31] [Debug] Client released

參考資料 http://sigquit.wordpress.com/2012/08/20/an-introduction-to-libqmi/ http://www.lanedo.com/users/amorgado/talks/FOSDEM2013%20-%20Mobile%20broadband%20modem%20control%20protocols.pdf http://blogs.gnome.org/dcbw/2010/04/15/mobile-broadband-and-qualcomm-proprietary-protocols/

usb網絡接口 ECM: Ethernet Control Model 802.3 ethernet frames 以太網控制模型

NCM: Network Control Model

MBIM協議 (由高通，愛立信，微軟等開發, USB論壇發布) 內核驅動是 cdc_mbim (Linux Kernel >= 3.8) 設備是 /dev/cdc-wdm libmbim mbimcli(libmbim-utils)

 mbimcli 
 -d /dev/cdc-wdm1 
 --basic-connect-query-subscriber-ready-status

在ChromiumOS上也實現了部分QMI協議 https://chromium.googlesource.com/chromiumos/platform/libqmi/+/master/src/

高通QMI協議

int 網絡訪問 imu 以太網 location lock merge message gen QMI(Qualcomm MSM Interface,官方名稱應該是Qualcomm Message Interface)是高通用來替代OneRPC/DM的協議，用來與mode

高通QMI協議

高通QMI協議

高通平臺，AP和CP端相關qmi介面，AT命令,NV等porting目錄

網絡通信協議

Hadoop - YARN 通信協議

高通創始人復盤30年發展歷程

RocketMQ通信協議

stm32之IIC通信協議

stm之SPI通信協議

泛泰A820L (高通MSM8660 cpu) 3.4內核的CM10.1(Android 4.2.2) 測試版第二版

MQTT, XMPP, WebSockets還是AMQP？泛談實時通信協議選型 good

Redis 通信協議-了解 Redis 客戶端實現原理

物聯網常見通信協議梳理

高通android開發摘要

ARM Cortex-A7架構，高通210系列-MSM8909

高通CEO莫倫科夫：5G手機從2019年開始將成主流（轉）

階馬由無社照節意是被層速手濟被計但高通

專利：結構化大數據通信協議（2）

關於dubbo通信協議之對比

通信協議之Modbus協議（一）

2017-2018-1 20155330 實驗五通信協議設計

高通QMI協議

相關推薦