使用RT3070使開發板上網
阿新 • • 發佈：2018-04-30
config llc 開發板 algorithm ethernet over byte cfg 默認網關
原文地址:http://www.cnblogs.com/NickQ/p/8973880.html
使開發板上網
USB驅動部分
在arch/arm/mach-s3c2440/mach-smdk2440.c中，修改Usb時鐘。
#include <mach/regs-clock.h> /* Add 2018/04/25-14:54:18 By Nick, for usb_s3c2440_init() */ #include <plat/udc.h> /* Add 2018/04/25-14:54:26 By Nick to support USB device gadget, 2017.5.4 */ #include <linux/delay.h> /* USB device UDC support add by 2018/04/25-14:54:57 By Nick */ static struct s3c2410_udc_mach_info smdk2440_udc_cfg __initdata = { .pullup_pin = S3C2410_GPG(9), }; /* Add by 2018/04/25-14:55:19 By Nick, fix device descriptor read/64, error -62 bug, value refer to datasheet P255 */ int usb_s3c2440_init(void) { /* Input Frequency is 12.0000MHz, and MDEV=0x38 PDIV=2 SDIV=2, so output frequency 48.00MHz */ unsigned long upllvalue = (0x38<<12)|(0x02<<4)|(0x02); while (upllvalue != __raw_readl(S3C2410_UPLLCON)) { __raw_writel(upllvalue, S3C2410_UPLLCON); mdelay(1); } return 0; }
調用初始化函數
//在smdk2440_map_io函數中調用usb_s3c2440_init()，修改USB時鐘 static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); usb_s3c2440_init(); }
配置內核，使能USB和無線網卡(RT3070)驅動
[*] Networking support ---> -*- Wireless ---> <*> cfg80211 - wireless configuration API [ ] nl80211 testmode command [ ] enable developer warnings [ ] cfg80211 regulatory debugging [*] enable powersave by default [ ] cfg80211 DebugFS entries [*] cfg80211 wireless extensions compatibility [*] Wireless extensions sysfs files {*} Common routines for IEEE802.11 drivers [ ] lib80211 debugging messages <*> Generic IEEE 802.11 Networking Stack (mac80211) Default rate control algorithm (Minstrel) ---> [ ] Enable mac80211 mesh networking (pre-802.11s) support [ ] Export mac80211 internals in DebugFS [ ] Select mac80211 debugging features ---> Device Drivers ---> Generic Driver Options ---> (/sbin/hotplug) path to uevent helper [ ] Maintain a devtmpfs filesystem to mount at /dev [ ] Select only drivers that don‘t need compile-time external firmware [ ] Prevent firmware from being built -*- Userspace firmware loading support [*] Include in-kernel firmware blobs in kernel binary () External firmware blobs to build into the kernel binary [ ] Driver Core verbose debug messages [ ] Managed device resources verbose debug messages [*] Network device support ---> [*] Wireless LAN ---> <*> Ralink driver support ---> < > Ralink rt2500 (USB) support < > Ralink rt2501/rt73 (USB) support <*> Ralink rt27xx/rt28xx/rt30xx (USB) support [ ] rt2800usb - Include support for rt33xx devices [ ] rt2800usb - Include support for rt35xx devices (EXPERIMENTAL) [ ] rt2800usb - Include support for rt53xx devices (EXPERIMENTAL) [ ] rt2800usb - Include support for unknown (USB) devices [*] Ralink debug output
Wireless tools移植
tar zxvf wireless_tools.29.tar.gz cd wireless_tools.29修改Makefile
## Compiler to use (modify this for cross compile). CC = /opt/xtools/arm920t/bin/arm-linux-gcc ## Other tools you need to modify for cross compile (static lib only). AR = /opt/xtools/arm920t/bin/arm-linux-ar RANLIB = /opt/xtools/arm920t/bin/arm-linux-ranlib使用make編譯.
將生成的命令工具:ifrename、iwevent、wgetid、iwspy、iwlist、iwconfig、iwpriv，libiw.so.29拷貝到開發板的/bin下，並分別賦予權限chmod 777 iw* libiw.so.29.制作openssl庫
tar zxvf openssl-1.0.0s.tar.gz mkdir install修改Makefile
修改路徑
INSTALL_PREFIX= INSTALLTOP=/home/nick/s3c2440/3rdparty/openssl-1.0.0s/install OPENSSLDIR=/home/nick/s3c2440/3rdparty/openssl-1.0.0s/install修改編譯選項
CC= /opt/xtools/arm920t/bin/arm-linux-cc CFLAG= -O DEPFLAG= -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE PEX_LIBS= EX_LIBS= EXE_EXT= ARFLAGS= AR= /opt/xtools/arm920t/bin/arm-linux-ar $(ARFLAGS) r RANLIB= /opt/xtools/arm920t/bin/arm-linux-ranlib使用sudo make && sudo make install 編譯安裝
拷貝libcrypto.a; libssl.a到開發板的/lib下
在下一步wpa_supplicant中需要使用這個庫，因此install將會被引用。
wpa_supplicant移植
tar zxvf wpa_supplicant-0.7.3.tar.gz cd ./wpa_supplicant-0.7.3/wpa_supplicant/ cp defconfig .config修改.config
CC=/opt/xtools/arm920t/bin/arm-linux-gcc -L /home/nick/s3c2440/3rdparty/openssl-1.0.0s/install/lib #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc #CFLAGS += -Os CFLAGS += -I/home/nick/s3c2440/3rdparty/openssl-1.0.0s/install/include #CPPFLAGS += -I../src/include -I../../src/router/openssl/include #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl LIBS += -L /home/nick/s3c2440/3rdparty/openssl-1.0.0s/install/lib使用make編譯
將wpa_cli，wpa_supplicant，wpa_passphrase拷貝到開發板的/bin目錄下。並給予權限 chmod 777：wpa_cli，wpa_supplicant，wpa_passphrase開發板配置以及操作
在/etc目錄下創建wpa_supplicant.conf配置文件
cd /etc wpa_passphrase ssid psk >> wpa_supplicant.confssid 是WIFI的用戶名
psk 是WIFI的密碼
例如：wpa_passphrase 16402_1 1640216402 >> wpa_supplicant.conf
cat ./wpa_supplicant.conf network={ ssid="16402_1" #psk="1640216402" psk=136a6b18bd0d21eb12d6bc591fa652d628cbb438e8f29fcfeb8d763c0bf15ec2 } [nick@NickQ_fl2440 ~]#
修改wpa_supplicant.conf,加入加密方式等配置
cat wpa_supplicant.conf
network={
ssid="16402_1"
key_mgmt=WPA-PSK
proto=WPA2
pairwise=TKIP CCMP
group=TKIP CCMP
psk="1640216402"
}key_mgmt=WPA-PSK 表示 采用WPA-PSK共享密鑰的認證方式
proto=WPA2 表示 WPA2加密方式
pairwise = TKIP CCMP 和 group =TKIP CCMP 表示 自動匹配加密算法CCMP或TKIP；
啟動RT3070並配置RT3070無線網卡參數
wpa_supplicant -B -d -Dwext -iwlan0 -c/etc/wpa_supplicant.conf 其中：
-d ：增加調試信息
-B：後臺守護進程
-c：指定配置文件
-Dwext：wext為驅動名稱
-iwlan0 ：wlan0為網絡接口名稱
iwconfig 查看連接狀態，已連接
[nick@NickQ_fl2440 ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"16402_1"
Mode:Managed Frequency:2.437 GHz Access Point: 14:75:90:7C:18:AC
Bit Rate=6.5 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=51/70 Signal level=-59 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:1 Missed beacon:0ifconfig 查看網絡狀態,發現無IP地址
[nick@NickQ_fl2440 ~]# ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:A1:B0:40:6F:1E
inet6 addr: fe80::2a1:b0ff:fe40:6f1e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:600 (600.0 B) TX bytes:876 (876.0 B)配置網絡IP,子網掩碼,網關
配置網絡IP,子網掩碼：ifconfig wlan0 192.168.168.100 netmask 255.255.255.0
配置默認網關：route add default gw 192.168.168.1
配置DNS： echo "nameserver 8.8.8.8" > /etc/resolv.confPing測試
[nick@NickQ_fl2440 ~]# ping baidu.com
PING baidu.com (220.181.57.216): 56 data bytes
64 bytes from 220.181.57.216: seq=0 ttl=55 time=25.000 ms
64 bytes from 220.181.57.216: seq=1 ttl=55 time=65.000 ms
64 bytes from 220.181.57.216: seq=2 ttl=55 time=65.000 ms開機自啟動
cd /etc/init.d/ vim S20_conf_wifi#!/bin/sh ifconfig wlan0 up wpa_supplicant -B -d -Dwext -iwlan0 -c/etc/wpa_supplicant.conf ifconfig wlan0 192.168.168.100 netmask 255.255.255.0 route add default gw 192.168.168.1
使用RT3070使開發板上網