mount on linux
操作須知
單獨 購買的數據盤 需要先 掛載數據盤,然後才能格式化。
隨實例一起購買的數據盤,無需掛載,直接格式化。
您需要知道掛載到實例的數據盤的設備名:您可以通過
操作步驟
在本示例中,我們用一個新的 20 GiB 數據盤(設備名為 /dev/xvdb)創建一個單分區數據盤並掛載一個 ext3 文件系統。使用的實例是 I/O 優化實例,操作系統為 CentOS 6.8。
-
遠程連接實例。
-
運行
fdisk -l
-
如果您的數據盤顯示的是 dev/xvd?,表示您使用的是非 I/O 優化實例。
-
其中 ? 是 a?z 的任一個字母。
-
- 創建一個單分區數據盤,依次執行以下命令:
-
運行
fdisk /dev/vdb
:對數據盤進行分區。 -
輸入
n
並按回車鍵:創建一個新分區。 -
輸入
p
並按回車鍵:選擇主分區。因為創建的是一個單分區數據盤,所以只需要創建主分區。說明 如果要創建 4 個以上的分區,您應該創建至少一個擴展分區,即選擇 e
。 -
輸入分區編號並按回車鍵。因為這裏僅創建一個分區,可以輸入
1
-
輸入第一個可用的扇區編號:按回車鍵采用默認值 1。
-
輸入最後一個扇區編號:因為這裏僅創建一個分區,所以按回車鍵采用默認值。
-
輸入
wq
並按回車鍵,開始分區。[root@iXXXXXXX ~]# fdisk /dev/vdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0x5f46a8a2. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won‘t be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to switch off the mode (command ‘c‘) and change display units to sectors (command ‘u‘). Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-41610, default 1): 1 Last cylinder, +cylinders or +size{K,M,G} (1-41610, default 41610): Using default value 41610 Command (m for help): wq The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
-
-
查看新的分區:運行命令
fdisk -l
。如果出現以下信息,說明已經成功創建了新分區 /dev/vdb1。[root@iXXXXXXX ~]# fdisk -l Disk /dev/vda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00053156 Device Boot Start End Blocks Id System /dev/vda1 * 1 5222 41942016 83 Linux Disk /dev/vdb: 21.5 GB, 21474836480 bytes 16 heads, 63 sectors/track, 41610 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5f46a8a2 Device Boot Start End Blocks Id System /dev/vdb1 1 41610 20971408+ 83 Linux
-
在新分區上創建一個文件系統:運行命令
mkfs.ext3 /dev/vdb1
。-
本示例要創建一個 ext3 文件系統。您也可以根據自己的需要,選擇創建其他文件系統,例如,如果需要在 Linux、Windows 和 Mac 系統之間共享文件,您可以使用
mkfs.vfat
創建 VFAT 文件系統。 -
創建文件系統所需時間取決於數據盤大小。
[root@iXXXXXXX ~]# mkfs.ext3 /dev/vdb1 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 1310720 inodes, 5242852 blocks 262142 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 160 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 37 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
-
-
(建議)備份 etc/fstab:運行命令
cp /etc/fstab /etc/fstab.bak
。 -
向 /etc/fstab 寫入新分區信息:運行命令
echo /dev/vdb1 /mnt ext3 defaults 0 0 >> /etc/fstab
。說明 Ubuntu 12.04 不支持 barrier,所以對該系統正確的命令是: echo ‘/dev/vdb1 /mnt ext3 barrier=0 0 0‘ >> /etc/fstab
。如果需要把數據盤單獨掛載到某個文件夾,比如單獨用來存放網頁,請將以上命令
/mnt
替換成所需的掛載點路徑。 -
查看 /etc/fstab 中的新分區信息:運行命令
cat /etc/fstab
。[root@iXXXXXXX ~]# cat /etc/fstab # # /etc/fstab # Created by anaconda on Thu Feb 23 07:28:22 2017 # # Accessible filesystems, by reference, are maintained under ‘/dev/disk‘ # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # UUID=3d083579-f5d9-4df5-9347-8d27925805d4 / ext4 defaults 1 1 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/vdb1 /mnt ext3 defaults 0 0
-
掛載文件系統:運行命令
mount /dev/vdb1 /mnt
。 -
查看目前磁盤空間和使用情況:運行命令
df -h
。如果出現新建文件系統的信息,說明掛載成功,可以使用新的文件系統了。掛載操作完成後,不需要重啟實例即可開始使用新的文件系統。
[root@iXXXXXXX ~]# mount /dev/vdb1 /mnt [root@iXXXXXXX ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/vda1 40G 6.6G 31G 18% / tmpfs 499M 0 499M 0% /dev/shm /dev/vdb1 20G 173M 19G 1% /mnt
mount on linux